Reddit Reddit reviews Lansky Ultra Fine Sharpening Hone with Yellow Holder

We found 8 Reddit comments about Lansky Ultra Fine Sharpening Hone with Yellow Holder. Here are the top ones, ranked by their Reddit score.

Kitchen & Dining
Cutlery & Knife Accessories
Knife Sharpeners
Home & Kitchen
Lansky Ultra Fine Sharpening Hone with Yellow Holder
Versatile device from cutlery sharpening company LanskyDesigned to help you sharpen variety of household knivesIntended for use with Lansky Sharpening SystemsPuts a fine, finished edge on your straight-edge bladesIncludes limited one-year manufacturer's warranty
Check price on Amazon

8 Reddit comments about Lansky Ultra Fine Sharpening Hone with Yellow Holder:

u/Riley_UK · 4 pointsr/knifeclub

Assuming you work through all the previous stones and make a nice uniform scratch pattern then you'll need their;

1000ish grit stone

2000ish grit stone

A couple of these

With some of this added to the first one

u/2580741 · 3 pointsr/videos

Well, if your knives are not expensive, professional-grade stuff, you could always just invest in a new knife ¯\(ツ)/¯ You don't have to drop $100+ on a knife to get something decent. I own this one, and make a few passes with the sharpening steel every use, and it's still sharp as the day I bought it.

Otherwise, you could look into a sharpening system like the Lansky Sharpening System. It has a guide so you don't have to sharpen freehand. It's moderately pricey, and I would suggest buying one or two additional hones for it (the case has two extra spaces for them \^-\^) but if you have a couple knives you want to keep in good shape, its a good investment. I enjoy using it, it's meditative. It might take 30 minutes per knife to completely refinish the edge, or just a couple minutes to bring it back to sharpness.

u/WWhermit · 2 pointsr/knives

Which "super-fine" Lansky hone should I get to accompany the Deluxe Diamond Set that I purchased, seen here:

http://www.amazon.com/Lansky-Diamond-Deluxe-Sharpening-System/dp/B000B8L6LS/ref=sr_1_3?ie=UTF8&qid=1452449613&sr=8-3&keywords=lansky

I feel that I would like to get a sharper edge than what I can achieve with this basic set. I was considering between the Ultra fine here:

http://www.amazon.com/Lansky-Ultra-Sharpening-Yellow-Holder/dp/B000B8L6MC/ref=sr_1_11?ie=UTF8&qid=1452449613&sr=8-11&keywords=lansky

or the Super Sapphie polishing hone

http://www.amazon.com/Lansky-Super-Sapphire-Polishing-Hone/dp/B000B8IEB8/ref=sr_1_5?ie=UTF8&qid=1452449613&sr=8-5&keywords=lansky

Both of which have been recommended, however I do think the ultra fine is better for sharpening, rather than polishing, no?

u/dennisthaamenace · 2 pointsr/knives

I personally use a KME and a Strop. But I'd recommend getting one of those Lansky Sharpeners with the Deluxe Diamond stones. It's similar enough to a KME; with limited angle choice but 30 25 20 and 17 are good enough IMHO. It runs for only $56 on amazon compared to the KME $180.

I'd also recommend grabbing the Ultra Fine hone on amazon for an extra $9 so you can put a nicer finish on your edges.

Lastly you'll need a strop. You can find one around on the internet or on /r/KnifeSwap occasionally, which is where I found mine. There's a user there that actually makes them by hand and includes compounds with the strop if you're ever lucky enough to grab one from there. But the best alternative is (again on amazon) the Knives Plus Strop Block. It comes preloaded with compound, and a lot of compound, and I've heard nice things about it. It's only $29, or you can go on the Knives Plus website and grab it for $23, but I think its worth the extra six bucks to get free/fast shipping, and have it all come in on the same day/in the same box as everything else.

Hope this helped! :)

u/Assstray · 1 pointr/knifeclub

Get some super fine sand paper and cut out little strips to fit over your current stone.

Use thin fabric tape (micropore or whatever) and cover your stone, then rub a bit of metal polish on the tape and strop away.

There is this thing too:

https://www.amazon.com/Lansky-Ultra-Sharpening-Yellow-Holder/dp/B000B8L6MC/ref=pd_sim_200_3?_encoding=UTF8&pd_rd_i=B000B8L6MC&pd_rd_r=VCNW54N3201JCD57VZ2Y&pd_rd_w=SeDKC&pd_rd_wg=OFdHc&psc=1&refRID=VCNW54N3201JCD57VZ2Y

You can put polish on the ceramic stone too like the tape.

u/Mr_Cellaneous · 1 pointr/knifeclub

The back of each stone would say something like "Coarse Diamond. Medium Diamond, etc" if they were.

You might want to get the Ultra Fine stone (https://www.amazon.com/Lansky-Ultra-Sharpening-Yellow-Holder/dp/B000B8L6MC/ref=sr_1_1?ie=UTF8&qid=1481586284&sr=8-1&keywords=lansky+ultra+fine+stone). You're making a big leap in grits going from fine to sapphire.

u/Freezerburn · 1 pointr/knives