Reddit reviews LavaLock RTV 650 F BBQ grill smoker sealer Hi Temp Silicon adhesive 3 oz. ( 2.8 fluid ounce)
We found 5 Reddit comments about LavaLock RTV 650 F BBQ grill smoker sealer Hi Temp Silicon adhesive 3 oz. ( 2.8 fluid ounce). Here are the top ones, ranked by their Reddit score.
650F Max Temp temp 3.0 oz tube (2.8 fl ounces) by LavaLockFood Contact Safe (FDA grade) BBQ wood stove sealer 650 F high tempExcellent silicon for sealing, creating or adhering gasketsAlso perfect for wood stove vent pipe, bbq smoke stacks and doors lidsSelf curing, easy to apply, long lasting, water tight and impervious to all weather
This is the silicone stuff I usually use, if it helps
I have the same model and absolutely agree with everybody that said seal it first. Use the high temp rtv on the mating surface between the firebox and the smoker and the two pieces of the firebox. Then use the gasketing tape on both doors. I even went a step further and prep the surface with the flap disc on my grinder first. Lastly and I highly highly recommend start a large very hot fire in the firebox before you do any cooking and burn off the coating of paint on the firebox. You don't have to get it all off but most of it otherwise there will be a very noxious smoke coming off while you cook. I used a block of wood and scraped it off when it gets all melted to speed up the process a little bit.
https://www.amazon.com/gp/aw/d/B01LRLELK0?psc=1&ref=ppx_pop_mob_b_asin_title
https://www.amazon.com/gp/aw/d/B01F9FE60K?psc=1&ref=ppx_pop_mob_b_asin_title
Links to the two products I used
As some added clarity since I use the same smoker, I ordered this and used it last weekend and it was amazing. I was able to get at least 6 hours of burn. I was making ribs so it only took about 5-5.5 and there were still unashed coals left. With it I can maintain a solid 250F.
I leave the stack damper/lid fully open. And I've insulated my doors with this. And for filling in around the seams, such as the stack or the firebox I purchased this. Those both will take about 24 hours to "cure" according to the directions.
Otherwise I think it's a solid entry-level smoker and hope you enjoy it!
P.S I know someone may ask if that charcoal cage was worth it and the quality is great, the inserts turn it into a snake method cage , and it feels quite sturdy.
Check this out at Amazon.com
LavaLock RTV 650 F BBQ Grill Smoker Sealer Hi Temp Silicon Adhesive 3 oz (2.8 fl. Ounce) https://www.amazon.com/dp/B01LRLELK0/ref=cm_sw_r_other_apa_i_EB8QDbNJXEBJD
And you can seal the corners where the sheet metal meet with this.
So this exact thing on my knock-off is stripped. That disc is threaded and should screw back on. If it has been ripped off, chances are that threading is gone. What i did is apply a small ring of 550° heat resistant adhesive (glue). I bought this silicone based adhesive off Amazon and it cured in a matter of minutes. The glue was very inexpensive and I believe it was designed for gluing parts of a smoker back together.
I applied a thin-film with a toothpick, making sure to use just enough of the yucky-smelling adhesive around that threaded piece. The first time i did it, I hardly used any and that sucker didn't move for 7 months. Popped off once and this time i used the product a bit better.
Here you go: LavaLock https://www.amazon.com/dp/B01LRLELK0?ref=ppx_pop_mob_ap_share