Reddit reviews Lighted Head Magnifying Glasses Headset with Light Headband Magnifier Loupe Visor for Close Work/Electronics/Eyelash/Crafts/Jewelry/Repair

We found 4 Reddit comments about Lighted Head Magnifying Glasses Headset with Light Headband Magnifier Loupe Visor for Close Work/Electronics/Eyelash/Crafts/Jewelry/Repair. Here are the top ones, ranked by their Reddit score.

Lighted Head Magnifying Glasses Headset with Light Headband Magnifier Loupe Visor for Close Work/Electronics/Eyelash/Crafts/Jewelry/Repair

VERSATILE APPLICATIONS - Lighted head magnifier with wide availability,ideal for hands-free close-up work like watch/circuit repair, crafts, jewelry,eyelash extension, reading, soldering, painting, etc.5 INTERCHANGEABLE LENSES - 5 pcs strengthening lenses of Hardness5 (1.0X,1.5X,2.0X,2.5X,3.5X) are included for your various needs, and well packed in a stable case for easy carry and long time storage.MULTI ADJUSTMENT - The light and lens angle can be adjusted for precise illumination and viewing.You can move lens back and forth to adjust the distance for comfortable focal range.2 WAYS TO WEAR - Comes with an elastic headband for 2 ways to wear.Headband can be replaced for a more secure fit and added comfort for long time use.MAGNIFY AND ILLUMINATE- The magnifying headlamp with 2 LEDs is quite bright and makes good light, not disturbing. No worries about light condition anytime and anywhere.Powered by 3AAA batteries(Not Included).

Check price on Amazon

4 Reddit comments about Lighted Head Magnifying Glasses Headset with Light Headband Magnifier Loupe Visor for Close Work/Electronics/Eyelash/Crafts/Jewelry/Repair:

u/thrilleratplay · 14 pointsr/thinkpad

I know. That was the first thing I thought. I bought two kits for my x220 and x230, I screwed up royally the first attempt and wound up needing to use the second set of items.

Before you start, the equipment you will need:

a precision screwdriver kit. This is what I use
Exacto knife
Dremel/pliers/sandpaper to make room for the LCD.
canned air to clean up the plastic and metal shavings from dremel/pliers/sandpaper
as /u/Bredius88 already mentioned, flux. I used liquid flux. If you use liquid flux you will also need rubbing alcohol and qtips to clean up.
desolder pump
magnifying lens of some sort. I used this which was good enough and could also keep my glasses on.
kapton tape. (1/4" width or less)
If it has been a decade since you last soldered or have shaky hands, or both in my case, I strongly suggest buying very thin solder and, if possible, a quality soldering iron like a Hakko FX888D. These were suggested by the EEVblog soldering tutorial made the second time around far easier.

A few words of "wisdom"
Take your time and do not rush. It is incredibly easy to miss things in the installation guide.
DO NOT FORCE ANYTHING. If the LCD screen does not lay flush with the screw holes or the bezel is not clipping, you need to remove more material from the case/bezel
Do not be stingy with the flux
Do not over heat your soldering iron
The sense wire looks like it is copper, but that is just the film on it. Gently scrape it with the exacto knife to reveal the wire in side. It will not solder with this film on it
For each step, tape the piece in place before soldering then gently remove the tape. This was the only way I could solder the sense wire because it is so thin and light
The eDP cable is very fragile. Do not keep plugging/unplugging it. If you do need ot unplug it (like after testing), only unplug the side from the board and keep pressure on the board when doing so as not to wreak your solder joints
When everything has been soldered in place, test it before putting everything back together

Also, on the V5, I used the old installation guide and the big difference is that the power is connected to the far left under the fuse marked "P". In the picture your finger is kind of covering it.

EDIT: Anyone trying to justify spending ~$125US on a good soldering iron and solder just remember that replacing the motherboard will cost you about the same and will not be as useful a decade from now.

u/LevelReward · 4 pointsr/HelpMeFind

https://www.amazon.com/Lighted-Magnifying-Magnifier-Headband-Electronics/dp/B06XWVJVKN

u/Assembly_Language · 4 pointsr/Warhammer

Heya, My sister got me a pair for Christmas, and then she got herself a pair last month.

These are mine

This is the pair she got for herself

When I was looking before Christmas for the ones I wanted, I hadnt seen the pair she got. If I had to do again, I'd probably have gone with hers as you can use two lenses at a time for even more magnification.

Back in 2015, I ended up with Shingles and it affected the Left Trigeminal Nerve causing Bell's Palsy. I spent 10 months without use of the left side of my face. Here we are nearly 3 years later, while its mostly healed, it looks like I have permanent nerve damage affecting my left eye, lid, eyebrow, and cheek. Since my left eye doesnt track with the right, this means my vision is nearly useless for detail work anymore. The headband jewelers loupe has meant I can hobby again, if not slowly. While the work really well, with my left eye is, I cannot work too long at a time as the eyestrain is still really bad. This is more an eye problem, not a problem with the headband.

I hope this helps

u/toybuilder · 3 pointsr/PrintedCircuitBoard

I am a big fan of using the Amscope for tweezer-placement of individual components on to a board. However, when doing SMD placement of an entire board to be reflowed, I've found that a 2.5x magnification visor was good enough and let me work much more quickly. 3.0x to 3.5x would be even easier for placement, but I find it easier to work on my build-sheet and the board at the same time if I stay at 2.5x.

This is the kind that I use a lot now: https://www.amazon.com/Lighted-Magnifying-Headband-Magnifier-Hands-Free/dp/B06XWVJVKN

I use the Abacom EZPick to do my placements -- for me, the ease of use and speed improvement for placing a bunch of parts has been worth it.