Reddit reviews Lithonia Lighting WF4 LED 30K MW M6 9.6W Ultra Thin 4" Dimmable LED Recessed Ceiling Light, 3000K, White
We found 4 Reddit comments about Lithonia Lighting WF4 LED 30K MW M6 9.6W Ultra Thin 4" Dimmable LED Recessed Ceiling Light, 3000K, White. Here are the top ones, ranked by their Reddit score.
EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for installHIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulationEXTREMELY BRIGHT DIMMABLE LEDs use 9.6 watts to provide 675 lumens with an 80 CRI, almost 70 lumens per watt. Dims down to 10% and compatible with select Lutron, Levitron, Synergy and Sensor Switch dimmersULTRA THIN LED design only requires a 4.2 inch ceiling hole and 2 inches of ceiling space are needed to fit LED wafer recessed light and UL recognized driverSAVES MONEY AND TIME changing bulbs - Energy Star rating provides high light output with minimal power usage and will last 36,000 hours or +16 years when on every day for 6 hours/day
Look at the ultra-thin LEDs. The only hole you need to make is about the thickness of a pencil, and easily sealed:
https://www.amazon.com/Lithonia-Lighting-WF4-LED-30K/dp/B01N9X6YII/
Since they have a very long lifetime, servicing them should not present a problem.
You can get them so they nestle in the first layer of drywall, or surface mount, if desired:
http://www.cooperindustries.com/content/public/en/lighting/products/recessed_general_purpose_downlighting/led/_6_inch_led_smd6/_889910.brands.lighting!recessed_halo!_led_direct_mount.html
Thank you for the reply. That was my concern and it makes sense once I started to understand the sound transmission through air and vibrations. We are worried about ceiling height as ours is slightly lower than normal already, but we’re convinced clips and hat channel are superior to RC-8 res channel for reducing noise, so low profile lighting is key to prevent lowering the ceiling feel further. If I went a product such as this would you recommend putty on the box and then an acoustic sealant around the edges of the light? It is an LED so it should last log enough that replacing it is a long way down the road, so sealing it seems worth the headache of eventually replacing it.
In my experience, the harsh effect will definitely be diminished. Especially if you're able to do a dimmer.
Here's a type of light I have used in the past.
You'll want to look up the right amount of light for your room (often referred to as footcandles). 12x12 is pretty small, but spreading out your light sources should really help!
You can buy them on Amazon too if you need them quicker: https://www.amazon.com/dp/B01N9X6YII/ref=cm_sw_r_cp_api_t7yHAb56ZNFV1
I just put these in my house and they're awesome. Bright, work in wet, and no discernable direction.