Reddit reviews Make: More Electronics: Journey Deep Into the World of Logic Chips, Amplifiers, Sensors, and Randomicity
We found 6 Reddit comments about Make: More Electronics: Journey Deep Into the World of Logic Chips, Amplifiers, Sensors, and Randomicity. Here are the top ones, ranked by their Reddit score.
Maker Media Inc
-----
-----
BOOKS
Children Electronics and Electricity books:
Newbie Electronics books:
Basic Circuit Theory books:
Analog Design books:
Digital Design books:
(download old edition)
Digital Signal Processing books:
Computer Design books:
6502,
6800,
6809,
8080,
8085,
Z80,
68000,
x86
processors on Wikipedia.
8051,
ARM,
AVR,
PIC,
RISC-V
microcontrollers on Wikipedia.
Electronics Reference books:
Historical books:
-----
-----
MAGAZINES
Current Electronics Magazines: (subscribe now)
Historical Electronics Magazines: (archives)
Historical Computer Magazines: (archives)
"Kilobaud"
-----
Hey! I can relate exactly to where your'e coming from. I, some years ago, decided I wanted to get into building synths. I ended up getting a job at a pedal company and have spent more time learning to build and repair pedals than synths. I don't work there anymore, but it gave me a lot of perspective into the field as we also made euro-rack modules.
First up: I don't want to scare you off from this, but just want to give you a realistic perspective so that you go into this knowing what you are getting into. Making synths is hard and it's expensive. As far as electronic projects go, making a synthesizer is up there on the list. I've repaired powerplant turbine controller circuitboards that were simpler than some of the synths I've owned. This isn't to say, "don't do it!" but, expect to learn a lot of fundamental and intermediate stuff before you ever have something like a fully-featured synth that you built in your hands.
It's also expensive. A cheap synth prototype is going to cost a couple hundred bucks, easy, while a more fully-featured prototype could cost into the thousands to produce, and that's just to build one working prototype. If you want to make a run of products you're going to need money up front, and not a small amount. So, just be prepared for that inevitability.
One final note is that my perspective is broad (digital and analog) but is rooted in analog electronics because that's where I started. This isn't the only path you can take to get to where you want to go but honestly in my opinion, even if you're going to go mostly digital later, you need to understand analog.
If you have never messed with electronics much before I highly recommend the Make: Electronics book. I'm a hands-on person and this was the most effective book I found that let me study electronics fundamentals the way I wanted to; by making stuff! No matter which direction you go on (digital, analog, hybrid, DSP, SID, etc) you're going to want to know how to pick the right resistor, or how to pop an LED into a circuit, and this book will teach you that.
Solid follow-up books from there are Make: More Electronics, Practical Electronics for Inventors, How To Diagnose and Fix Everything Electronic, and The Art of Electronics. All of these books are good books that touch on different concepts you will find useful, so I encourage you to look through them and decide for yourself which of these interests you.
Around this same time, I'd encourage you to start getting into kits. Honestly, before you build anything synth, I'm going to recommend you build some pedals. Effects pedals are fun and rewarding to build without being too hard. Start with a distortion circuit and work your way up from there. Once you can build a delay pedal without freaking out, move on to euro-rack kits, or other synth kits. While you're building these kits, don't just build them, play with the circuits! Try swapping components where you think you can, or adding features. One of my first kits was a distortion pedal with a single knob, but by the time I was done tweaking on it it had five knobs and two toggle switches!
Once you're feeling somewhat comfortable with electronics, then you can dive into the holy grail of analog synth design: Make: Analog Synthesizers this amazing book was written by the brilliant Ray Wilson who recently passed away. His life's goal was to bring the art of building analog synths into the hands of anyone who wanted to learn, and there is no better place to receive his great wisdom than this book. You should also check out his website Music From Outer Space along the way, but the book covers so much more than his website.
If you make through most or all of those resources you are going to be well-equipped to take on a career in synth-building! I'm personally still on that last step (trying to find the time to tackle Make: Analog Synthesizers) but hope within the next year or two to get that under my belt and start diving in deep myself. It's been a fun journey of learning and discovery and I wouldn't trade the skills I've gained in electronics for much.
Hope this helps, good luck!
Maybe something like this?
http://vetco.net/products/300-in-one-experimenter-kit
I'd also recommend the following books:
Practical Electronics for Inventors:
www.amazon.com/gp/aw/d/1259587541
Make: Electronics:
www.amazon.com/gp/aw/d/1680450263
Make: More Electronics:
www.amazon.com/dp/1449344046
Make: Electronics is a very good book. You can buy a series of kits to complete the projects in the book. There is also a sequel (Make: More Electronics) and a series of encycliopedias from Make about electronic components.
ah I see. Well you definitely are on the right track by doing mesurements while you are building. I am not really the right person to ask because Im still in the beginning stages but I also bought: Boylestad https://www.amazon.com/Introductory-Circuit-Analysis-Robert-Boylestad/dp/0133923606 (a much cheaper older version that I found for about $10 I think you are aware one nice thing about learning electronics from scratch is that the basics, the most important things, were discovered a long time ago so you can get a great wealth of information for very cheap....) This is pretty much, well like exactly what youd use if you took a college course on circuit analysis, much great information on the physics and basics of linear and non-linear circuits, it can be pretty dry though, but that is what you probably really need if you want to really "grok" what is going on in a circuit, i.e. using OHMs/Thienevin laws etc and Loop analysis, looking at the numbers from and finding missing values when you only have say the voltage and current etc
This one https://www.amazon.com/Make-Electronics-Journey-Amplifiers-Randomicity/dp/1449344046/ref=sr_1_1_sspa?crid=1P86DOCJID6WO&keywords=make+electronics+2nd+edition&qid=1557865653&s=books&sprefix=make+elec%2Cstripbooks%2C159&sr=1-1-spons&psc=1 which is definitely very good because it includes actual images of breadboards (which are not always intuitive even though very simple to impliment, really that has to do with human error, thats why its all about trying it out/getting yr hands dirty!) and some other stuff. I know there are a TON of people out there why swear by the Ray Wilson websites and books, I bought one and just have been into other things but when I get back into it I know I am going to go back to those Wilson projects...
Another REALLY awesome thing I just remembered: EveryCircuit App, super great becasue it shows live demonstration of signal flows...
Forrest Mims books? or Make Electronics and More Make Electronics
http://www.amazon.com/s/url=search-alias%3Daps&field-keywords=forrest%20mims&sprefix=forrest+mims%2Caps&rh=i%3Aaps%2Ck%3Aforrest%20mims
http://www.amazon.com/Make-Electronics-Discovery-Charles-Platt/dp/0596153740/
www.amazon.com/Make-Electronics-Journey-Amplifiers-Randomicity/dp/1449344046/
Analog Seekrets by Leslie Green (Once you have a handle on Electronics)
http://www.logbook.freeserve.co.uk/seekrets/
http://www.eevblog.com/files/seekPDF.pdf