Reddit Reddit reviews Mishimoto MMOC-370Z-09T Oil Cooler Kit Compatible With Nissan 370Z 2009-2020 Infiniti G37, 2008-2015 Coupe only Silver

We found 1 Reddit comments about Mishimoto MMOC-370Z-09T Oil Cooler Kit Compatible With Nissan 370Z 2009-2020 Infiniti G37, 2008-2015 Coupe only Silver. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Engine Coolers & Accessories
Automotive Replacement Engine Coolers
Automotive Replacement Engine Cooling & Climate Control
Mishimoto MMOC-370Z-09T Oil Cooler Kit Compatible With Nissan 370Z 2009-2020 Infiniti G37, 2008-2015 Coupe only Silver
Compatible with the 2009-2020 Nissan 370Z and 2008-2015 Infiniti G37 coupeIncrease in Oil Capacity: 0.65 quarts / Temperature Difference: 30°F / Pressure Drop: 2-3 psi19-row stacked-plate oil cooler for optimal fluid temperature reductionBillet aluminum oil sandwich plate in standard or thermostatic formMishimoto Lifetime Warranty
Check price on Amazon

1 Reddit comment about Mishimoto MMOC-370Z-09T Oil Cooler Kit Compatible With Nissan 370Z 2009-2020 Infiniti G37, 2008-2015 Coupe only Silver:

u/ZyphronLX · 1 pointr/370z

no, you Just happen to have "great" luck. but sooner or later it will Happen to you, so Instead of trashing the car on here. which the Little child in my brain wants to do. i'm Going to Post everything you could ever need to Figure it out. here we go

  • Fuel Sending unit what it looks like you get these from the dealer for $140 and $30 tank seals (2 each) I have part numbers but if you ask for both left and right sending units the parts counter will find you the correct parts. You will know have a tank issue if you have the Following codes: P0460 and or p0461 CEL's
  • Steering lock: the issue and how you know its happening push start wont go past this you my friend are LUCKY this has not happened. seriously. Imagine your car is just randomly dead. and you can't do Anything about it... this may save you a tow or prevent the issue by Pulling a fuse or by Binding the Lock up
    teardown of lock you can Bypass this and its 500 bucks for a new one that is made the same with the same failure rate. easiest way for me was to remove the lock and Bind it up with a Chunk of Alum. then I pulled the fuse.
  • Oil Consumption issues : there is no "real fix"
  • Fuel starvation: I'm currently working on this and it appears to happen only in hard right turns and Low (1/3 tank or less) on hill starting situations. Hydramat install this inside the tank and the Aux Suction line will need to be retrofitted to mount on the Hydamat. this will allow the pump to Pull from the left side when all the fuel flows over 2 it.

  • Fuel Pump Damage inside of tank. Broken post Post that fell off
    Repaired pumpthis is a Temporary fix and you loose access to the last 2 gallons of the tank because you have shortened the Mount. Phuck on the370z.com is currently working on a Metal top plate. new pump costs $700. but a new top plate will be less then $200

  • Crank position sensor Melting from Exhaust heat.Problem and Soultion

  • Oil Overheating Issue :my Oil temp 109f 30 Mile drive, Light traffic never above 5k Rpmfrom amazon

    *VLSD: change the DARN OIL


    and again, im not trying to shit on the car or tell others to NOT get it. im trying to get others to be aware of these issues. my Nissans have all been Trouble free short of a few hickups. and replacing wear parts... so this car has been alot of work and time so far.......