Reddit reviews Napa 7651346 SIL Glyde Silicone Lubricating Compound Tube, 8 oz.
We found 6 Reddit comments about Napa 7651346 SIL Glyde Silicone Lubricating Compound Tube, 8 oz.. Here are the top ones, ranked by their Reddit score.
high film strength, stays put and water repellentApplications: brake pads, calipers, rubber boots, fan belts, v-belts, weather stripping, trunk seals and bumpersThis is a Napa private branding of american grease stick company (ags) sil-glyde sg-8Chemical Working Temperatures: -20 To 500 Deg. F.
Silicone grease as to not break down the rubber. Officially its this: https://www.amazon.com/Honda-Genuine-Shin-Etsu-Grease/dp/B006Z9TZ9M
This is more for your money: https://www.amazon.com/3M-08946-Clear-Silicone-Paste/dp/B005RNEH5O
Or local napa has https://www.amazon.com/Napa-7651346-Sil-Glyde-Silicone-Lubricating/dp/B0054DWS1W
http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/Lubricant-Multi-Purpose-Sil-Glyde-Lubricates-Prevents-Sticking-On-Rubber-Metal-Wood-Plastic/_/R-BK_7651351_0361142439
http://www.amazon.com/Napa-7651346-Sil-Glyde-Silicone-Lubricating/dp/B0054DWS1W/ref=sr_1_1?ie=UTF8&qid=1453322685&sr=8-1&keywords=sil+glyde
https://www.amazon.com/Napa-7651346-Silicone-Lubricating-Compound/dp/B0054DWS1W That stuff
If the caliper isnt freely moving well this can happen. The slide pins get gummed up (if that caliper has them) and it doesnt release properly. Common on GM vehicles as well
They need to be cleaned and lubed. You should use sil-glyde lube as well, as other types of lubes tend to cause the rubber boots that seal the pins to rot or get eaten. https://www.amazon.com/Napa-7651346-Sil-Glyde-Silicone-Lubricating/dp/B0054DWS1W
Napa Sil-glyde
I replaced the junky ancient thermal compound on a prebuilt, and the temperatures were a little better. The thermal compound was dried out anyway. My 6970 ran much hotter with brake lube (nearly 95C vs 60C during gaming) than with the Noctua NT-H1 I have on it now and I think it was destroying the pcb. The compound was almost clear when I put it on and greenish when I took it off.
I would recommend it as a cheap fix for cpus, but not for gpus.
I used NAPA Sil Glyde, and since it is meant for brakes it doesn't liquify at high temperatures. It's really cheap too, so it might be good for a repair shop.
https://www.amazon.com/Napa-7651346-Silicone-Lubricating-Compound/dp/B0054DWS1W