Reddit reviews Oculus Rift CV1 Compatible Sensor Wall Mounts (Black, 4 Pack)

I bought these and they've worked great for me so far, never fallen down and don't require any insertions into the wall

Many people seem to have luck using these wall mounts and 3M Command Strips to stick them to the wall.

https://www.amazon.com/gp/product/B06XR8DL7T/ref=s9u_bmx_g_gw_i2?ie=UTF8&fpl=fresh&pd_rd_i=B06XR8DL7T&pd_rd_r=7a288755-2b29-11e8-a77e-4f4ee7533ebd&pd_rd_w=dvv1j&pd_rd_wg=bqt3A&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=M91ENTN8YTQ9BMSEYBGB&pf_rd_t=36701&pf_rd_p=e6624b56-7cc1-411f-9d12-9cc8feb6c214&pf_rd_i=desktop

Depending on how high or far apart you mount it, might be a good idea to get an extension cable as well. If the wires look too unsightly, maybe some white tape would help cover itup.

Personally I use bookshelf speakers so I ended up propping them up higher and putting my cameras on top of them.

that's pretty awesome to hear, i never knew that. with the basestations can you easily attach them to the walls or is it something you'd need a shelf to sit them on? like currently with my rift sensors i unscrewed the top of them and attached them these and it's an easy stick to the wall. since i've never seen or used their basestations i'm not sure how they attach to walls or set up

So if you just want the wall mounts, there is someone that sells them on Amazon that uses a similar file as I do. You can easily get it from him and not have to wait for me to print them.

https://www.amazon.com/Oculus-Compatible-Sensor-Mounts-Black/dp/B06XR8DL7T/ref=sr_1_3?ie=UTF8&qid=1541119105&sr=8-3&keywords=oculus+wall+mounts

Honestly iRacing, AC and PCARS2 all work well in VR, PCARS2 does require quite the computer to run it, however. iRacing supposedly has very good VR implementation, good performance all around. AC would be quite in between I can imagine, it's my go-to sim overall and I had no issues playing with even a little bit of SuperSampling on just a GTX980.

For racing sims, the HMD of your choice is the Oculus Rift. I haven't tried the Vive Pro so I can not comment on it personally, but from what I've gathered watching the tech giants, it's not quite a step up worth the money.

For sim-racing and seated experience all together, there really is no other choice than the Oculus Rift. Reasons being:

• More ergonomic controllers
  
  
• Lighter headset, and better weight distribution overall, it literally feels like half the weight of a Vive
  
  
• Built-in headphones, surprisingly good quality as well (I don't feel the need to use my Beyerdynamic DT 770 Pro headphones, that says quite a bit)
  
  
• Better performance with asynchronous spacewarp
  
  
• Clearer screen (this is reason enough to go Rift > Vive imo) and with asynchronous spacewarp you can afford to run more supersampling, resulting in an even better looking experience
  
  
• MUCH cheaper! Not only that, but for the Vive to even be close in comfort you'll need the deluxe audio strap, spending even more money, and even then it only comes close at best.
  
  The only thing the Vive does better is roomscale, and even then it is just marginally better if you have a big enough area for it. I use 3 sensors mounted just below my ceiling using 3d printed wall mounts, very similar to these I found on Amazon, and the tracking is just flawless. A friend of mine has the HTC Vive, and apart from his slightly bigger play area, the roomscale experience is undoubtedly just as good.

https://www.amazon.com/gp/product/B06XR8DL7T/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I used these to hang rift sensors in three corners of a room and have been pleasantly surprised. They're hanging about six and a half feet up the wall, with the USB cable (and USB extension in one case) hanging, otherwise unsupported down to the floor. Despite that weight (sensor + cables + mount) they've stayed firmly in place since putting them up four months ago.

I had purchased cctv-style wall mounts as well, but decided on giving the linked mounts a chance first as this room is in a newly purchased home, and I'm still in that "want to avoid making unneeded holes in the walls" phase. At this point I have no intention of using the cctv-style mounts.

I got my headset used for $299 in like new condition. was used once for a demo
https://www.amazon.com/gp/product/B073X8N1YW/ref=oh_aui_detailpage_o08_s00?ie=UTF8&th=1

3rd Sensor plugged into an USB 2.0 port on computer
https://www.amazon.com/gp/product/B0727WDPX6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Rechargeable AA batteries and charger
https://www.amazon.com/gp/product/B00JHKSL1O/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

USB Expansion card
https://www.amazon.com/gp/product/B00B6ZCNGM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Headset and touch wall mount
https://www.amazon.com/gp/product/B0781G75B5/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Wall Mount used for rear left sensor
https://www.amazon.com/gp/product/B06XR8DL7T/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Cable management system
https://www.amazon.com/gp/product/B073P7GJNP/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Mount clip used for front left sensor on shelf
https://www.amazon.com/gp/product/B01MG4D3O5/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

HDMI extension for headset, only one used.
https://www.amazon.com/gp/product/B00JJ519KC/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

2 pack 6 feet USB 3.0 extension cables, one used for front right sensor and one used for headset
https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Sensor ceiling mount used for front right sensor
https://www.amazon.com/gp/product/B000IDCDZY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

3 foot usb 3.0 extension used for front left senor
https://www.amazon.com/gp/product/B00C7S1B4W/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Cleaning Cloths
https://www.amazon.com/gp/product/B00NR9S3EQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Oculus Rift Facial Interface & Foam Replacement Basic Set
https://vrcover.com/product/oculus-rift-facial-interface-foam-replacement-basic-set/

Photo of final setup
https://ibb.co/exkWXx

I have had no issues at all, this setup working very well for me.

This was my first wall mounts:

https://www.amazon.com/gp/product/B06XR8DL7T/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

In terms of what they are, they're fine. They attach to the wall with command strips. My problem with them was that the command strips didn't adhere well enough, and kept falling off my wall. I could have bought better command strips I suppose, but I went with something different.

Since I don't have any problem with putting holes in my wall, these were my second wall mounts:

https://www.amazon.com/gp/product/B01HMNJIO6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

So far I've had no problem with these.

hey syster/broder

Amazon.co.uk samma produkt minus aidsfrakten

finns andra billigare säljare tror jag, sök runt lite, jag köpte ett 2pack för några månader sen för typ 10 pund

Hey! Oculus Rift Sensor Mount Black (4 pack) https://www.amazon.com/dp/B06XR8DL7T/ref=cm_sw_r_cp_apip_Gf5Ti6K6PW8TW

They come with adhesive strips too but name brand command strips are usually better

CLEAR YOUR AREA!


you can get 3d printed wall mounts for your sensors that stick on with double sided tape off of amazon


try to not put all the usb cables on the same usb controller, or get a powered usb 3.0 hub, otherwise the sensors overload the controller and the sensors wont work


games i recommend:

• windlands-basically spider-man simulator, dont try if you get motion sickness easily
  
  
  
• robo recall-really fun fps, great humor
  
  
  
• lone echo/echo arena-zero-g antics, lone echo is a single player story while echo arena is a multiplayer team based game
  
  
  
• super hot-time moves when you do
  
  
  
• skyrim VR-its skyrim, in VR, 11/10 recommended
  
  
  
• space pirate trainer-arcade wave based shooter

https://www.amazon.com/Oculus-Compatible-Sensor-Mounts-Black/dp/B06XR8DL7T/ref=sr_1_1?keywords=rift+wall+mount+sensor&qid=1564851212&s=gateway&sr=8-1

:P

I bought these from Amazon.com and they work perfectly with Medium-sized Command strips. I've put them up on the walls in two apartments so far with no shifting or any issues whatsoever.

I think these are the same 3D print, but you might have to look on eBay to buy only 2 or 3 of them, depending upon your setup.

Here's the Thingiverse page for the sensor mounts I have.