Reddit reviews OdiySurveil(TM) UTP 4 Channel Passive HD Transceiver,BNC RJ45 UTP Converter for 720P 1080P CVI/TVI/AHD CCTV System
We found 1 Reddit comments about OdiySurveil(TM) UTP 4 Channel Passive HD Transceiver,BNC RJ45 UTP Converter for 720P 1080P CVI/TVI/AHD CCTV System. Here are the top ones, ranked by their Reddit score.
Shell Material:Metal shell with pure copper BNC connectors,Product Name: 4CH Passive HD Transceiver;Size: 11.2 x 5.2 x 2.5cm ;Weight: 180g;Anti-interference: 60db;BNC Male Impedance: 75ohms,UTP Cable Impedance:100ohms;Resolution: 720P/1080P; No power required, Built-in transient suppression protection;Working temperature:-10°C~55°C;Storage temperature: -20°C - 70°C;Humidity: 0~95%(non-condensing);Package Content : 1 x 4CH Passive HD Transceiver ; 1 x Manual;OdiySurveil(TM) Brand product with the best quality and more efficient signal transmission,do not compare with those junk materials.
That is something I considered, which was a big factor in deciding on a slightly different approach. I'm going with these for the CAT-5E end points (one with BNC pig-tail and the other with female BNC connectors), and power will be run from an outlet at the remote end instead with the normal four-way splitter (that looks like this) that can with these cameras, via short BNC-and-power cables to the cameras from there, all nicely mounted inside.
This way I don't have to worry about power coming up the line from the house (from where the DVR is) but instead using a plug closer to the cameras.)
Would you say this is a much better scenario?