Reddit reviews OPCC OPCC-136 6pcs Non-magnetic Steel Fine Curved Tip Tweezers Forceps Anti-static ESD 10 11 12 13 14 15 SMD chip-6pcs
We found 2 Reddit comments about OPCC OPCC-136 6pcs Non-magnetic Steel Fine Curved Tip Tweezers Forceps Anti-static ESD 10 11 12 13 14 15 SMD chip-6pcs. Here are the top ones, ranked by their Reddit score.
Non-magnetic tip tweezersNon-magnetic steel fineAnti-static tweezersInclude: esd-10 esd-11 esd-12 esd-13 esd-14 esd-15Excellent for phone, watch fixing, Electronics maintenance, jewelry and other fine crafts, medical and Laboratory work, Cosmetic hair removal and more works
I don't have much to add just going to go in to a bit more detail. I usually try to keep at least 2 or more of each screw or nut my drones use, that includes the motors, camera mount, ANY screw.
Loctite/thread locker will help but some times repeated hard crashes loosen screws and you may not realize it. With that said you don't want to use anything above blue Loctite such as red or green, you want to be able to get the screws off!
I also bought a ton of micro JST connectors and a crimper to repair balance lead connectors. This wouldn't be needed if you are diligent about keeping your battery wires away from your props, I was not, but some times it is unavoidable.
And the random things I keep around are; velcro, VHB tape, shrink tubing of various sizes(you can get assortments from Amazon), spare VTX pig tails, various sizes of silicone wire (26awg for ESC signal wire, 18ga wire for power and ground to ESCs, 14awg for power leads), flush cutters, different tipped tweezers, spare antenna cable for the receiver, servo leads, circlip pliers.
All that comes to mind at the moment but I am sure I am missing stuff. Here are some links!
Flush Cutters
26awg Silicone Wire
14awg Silicone Wire
VHB Tape
Micro JST Crimper
Micro JST Connectors
Circlip Pliers
Servo Connectors-not silicone
Tweezers
esd-13 bent the ends like the one in the pic and works like a charm.