Reddit reviews OTC 4611 Battery Terminal Puller
We found 5 Reddit comments about OTC 4611 Battery Terminal Puller. Here are the top ones, ranked by their Reddit score.
Designed to remove the battery cable clamp from the postWill not damage batterySpring-loaded sharp jaws get under the clamp for a secure gripOne year limited warranty
Battery terminal puller:
https://www.amazon.com/OTC-4611-Battery-Terminal-Puller/dp/B000ZIZ32W
Just replaced my worn Carbon GT pulley with a steel pulley a couple weeks ago! It was incredibly frustrating and took me a lot of trial and error to figure it out, but this battery terminal puller is the main tool I used.
I also bought a heat gun to heat up the pulley's loctite to make removal easier and had to drill out the grub screws because I'm pretty sure I stripped them while trying to unscrew them. You also need a 1/2"-1" screw or small metal rod that fits the 8mm diameter bore of the axle so you can use that as leverage with the terminal puller to pop off the pulley.
This probably sounds unclear and complicated because it totally was to me when I started, but one of my next Electric Wave episodes will be focused solely on explaining this procedure. I've already shot the footage, I just need to edit it together. I'll get it up as soon as I can so you can get yours removed as well. Feel free to DM me with any questions in the mean time and I'll do my best to answer them.
You can tap it with the wrench you used to remove the nut. This can free up the wedge they use to tighten the clamp. If tapping doesn't work you can use a screw driver to gently pry the clamp off. Too hard and you can rip the post its self out of the battery, ask me how i know that. If it really gives you trouble get one of these, any parts stores should have them.
https://www.amazon.com/gp/aw/d/B000ZIZ32W?psc=1&ref=ppx_pop_mob_b_asin_title
I knew that. 馃槰
I just looked up this tool online and it looks like a thing that holds the battery peg downward and pulls upward on the terminal connector easily, looks like its what im wanting since the battery peg is getting ripped out when I just use a screwdriver to pry it. is this the right tool? https://www.amazon.com/OTC-4611-Battery-Terminal-Puller/dp/B000ZIZ32W