Reddit reviews PAC AOEM-MAZ2 Interface That Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System
We found 7 Reddit comments about PAC AOEM-MAZ2 Interface That Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System. Here are the top ones, ranked by their Reddit score.
Interface is Transformer isolatedMaintains phaseLinear from 20-20, 000 HzProvides 2: 1 gain and infinite attenuationInput connectors plug into factory stereo and vehicle harnessInterface that allows the replacement or addition of an amplifier in select Mazda vehicles without premium Bose sound systemInterface is transformer isolatedMaintains phaseLinear from 20-20,000 HzProvides 2:1 gain and infinite attenuation
Fortunately you don't need to cut into the wires. I found a thread a while back on the Mazda 3 Revolution forums where they used a PAC to add a sub. I did it on my 2015 iTouring and gave it a ton more low end that the Bose simply cannot create.
Double check -- but i was looking around myself for a 2014 mazda 3 and kept seeing that the 'older' adapter from PAC (AOEM-MAZ2) worked with a ton of mazdas.. no idea for your application though.
Check the amazon comments: https://www.amazon.com/PAC-AOEM-MAZ2-Interface-Replacement-Amplifier/dp/B001715RQS
Good luck!
Check out this option
https://www.amazon.com/gp/aw/d/B001715RQS/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8
It installs behind the glove box on the right hand side. I'm about use this tomorrow on my 2014 Mazda 3 (non Bose). I can let you know how it works out if you'd like. It sounds like alot of folks were having success with the Bose system as well.
It is the same yes and is actually the same for the ones with Bose. It should be plug and play. No wiring on your part.
https://www.amazon.com/gp/product/B001715RQS/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I have one more question. The amp has 6 inputs ( 2x front, rear, and sub). http://www.alpine.co.uk/fileadmin/images/MainNavigation/Products/Product_pics/12_Amplifiers/01_PDXAmplifiers/PDXV9/productpic_PDX-V9_03.jpg
The Line out converter I am using has only the front and rear outputs. Can I/Should I get an RCA splitter and have the LOC rear output connect to the amp rear and sub inputs?
This is the LOC. https://www.amazon.com/gp/product/B001715RQS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I am only getting it because it is a simple addition to my car without having to splice any wires, but if there is a better way, I'd love to hear it as well.
PAC AOEM-MAZ2 Interface that... https://www.amazon.ca/dp/B001715RQS?ref=yo_pop_ma_swf
I'm using the stock headunit
I got a 2017 and plan to upgrade the stock speakers and add an amp/sub.
To connect to your stock head unit without splicing wires you can use a PAC AOEM-MAZ2: https://www.amazon.com/PAC-AOEM-MAZ2-Interface-Replacement-Amplifier/dp/B001715RQS
There are tweeters on the dash in the top right/left corners.
There are woofers on each of the 4 doors.
You will have to use a dremel to cut them out of the plastic Mazda housing, and your new speakers can be glued/screwed into place. You can google around for instructions and YouTube videos.
You can use whatever amp/sub you want. Run cables under the door trim up to the dash. The power cable can go through the firewall via the wiring harness entry point.
Doing any non-official Mazda modifications on your car will void your warranty for whatever the dealer can prove they caused issues with. Having someone else perform the install will not change this. However, just because you install new speakers/sub does not mean your whole warranty is automatically voided. Likely just any claims you would have about audio/electrical issues could be disputed by the dealer.