Reddit reviews Poyiccot DP to DP Coupler, 2Pack DisplayPort (DP) Female to DisplayPort (DP) Female Coupler Convertor Extension Adapter Black (displayport Female to Female)
We found 3 Reddit comments about Poyiccot DP to DP Coupler, 2Pack DisplayPort (DP) Female to DisplayPort (DP) Female Coupler Convertor Extension Adapter Black (displayport Female to Female). Here are the top ones, ranked by their Reddit score.
DISPLAYPORT CABLE coupler extends the cable length to your computer with a DP, DP++ or DisplayPort++ output port; Add an additional DP cable instead of unplugging one that is difficult to reach or routed behind furniture; Extend a Display Port cable to a DisplayPort MST hub to reduce cable clutter around the desktopDISPLAYPORT GENDER CHANGER joins two DisplayPort cables with male ends into one longer cable; DisplayPort extender adapter protect the ports on your computers and monitors from constant unpluggingDisplayPort extension coupler prevents accidental disconnection of your latching DisplayPort cables; Sturdy housing with gold-plated connectors provides a coupler with minimal signal loss and a lifetime warrantyPLUG & PLAY with this passive DisplayPort cable coupler; Offers pass-through support for all the DP features of the connected cables, source computer and output display; Supports HDCP and DHCP pass-throughItems per lot : 2 pieces well-packed. please note this dp adapter is main to connect the computer cable, and it is not fit to connect the TV cable. And it is not support for the rift s.
Let me just start off by saying, even with just the few hours I've played with it, I LOVE this thing. Thank you valve for making such an awesome piece of hardware. And yes, my unit does have the joystick issue but it's just the feedback that's broken. My joysticks otherwise register without issue.
But anyways onto the good stuff.
What?
A 20m (65ft) cable run from my desk to right under the couch, so that the only hookup is the breakout / trident cable.
Why?
In my place, I ran into the predicament of the only space I had room to do VR was the living room, but given that putting my entire desk in the living room would have been weird aesthetically, I opted for the cable run, to get VR from the PC in the room across the house to my living room.
What parts?
Pretty simple actually, but it did require 2, not exactly cheap cables, and one coupler (prices in US Dollar).
The DP - DP coupler is out of necessity, given that no link box exists with the Index. Yes, it's an expensive solution. In addition to the $999 headset, I've spent another ~$231 on cable runs. But for my situation, it works flawlessly.
If you are thinking you need a solution like that, and any of the cables are unavailable (the DP cable is out of stock as of writing on July 6th), make sure to get fiber if you can for the sake of not losing quality over a copper cable. As for the USB cable, you're looking for an active cable. These typically have external power bricks to supply additional 5V power that your tower cannot do over such a distance. Edit: _However_, I have found that plugging in the additional power causes the computer to have issues recognizing any USB device, so I guess don't do that if you buy the same cable. Other cables may vary.
How is it setup?
I have the cables running along the basebords of the house, from my computer all the way to the living room. They take a right angle, and are gaff-taped down to the floor before running under the couch where they can become a loose coil [pic].
Does it work?
In a word, yes! I will update this comment if I run into reliability issues down the line, but it seems that this system works well enough, and has the added bonus of not hearing the PC fans spinning given the off-ear design of the Index headphones. (Edit: The only pitfall is that sometimes you have to power cycle the headset once or twice to get SteamVR to see it, but that doesn't take long. After that it's smooth sailing!)
Hope this helps anyone that might be needing a similar setup!
(EDIT: Numerous edits for spelling / grammar)
https://www.amazon.ca/gp/product/B00V7NOST8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
and
https://www.amazon.ca/gp/product/B076C6PDNH/ref=ox_sc_act_title_1?smid=ANO99AFAXRIXA&psc=1
and perhaps one of these
https://www.amazon.ca/gp/product/B07JRGGWH7/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
and maybe a power extension depending on what you're doing.
This is the Display Port cable I'm using. Specifically, the 60ft (20m) version:
https://www.amazon.com/gp/product/B07QQNFKZK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
which needs to be paired with a DP Coupler. This is the one I bought:
https://www.amazon.com/dp/B07JRGGWH7/ref=cm_sw_em_r_mt_dp_U_JvooDbD64BEQP?fbclid=IwAR202v1hw90YHxwzPg8d6--AfZPbiIGascJwdkoUH7iTQvadOpyhKYgoK9M
This is the USB 3.0 repeater I'm using. Again, the 60ft (20m) version:
https://www.amazon.com/dp/B0053YLYLC?ref=ppx_pop_mob_ap_share&th=1
I've been using this setup for the past few days with ZERO issues. Everything works perfect.