Reddit reviews Runshuangyu Movie Blackmagic Cinema Camera BMCC 4K BMPCC Power Supply Mount Plate Adapter for Sony NP-F970 Battery

I went this route originally, very cumbersome form factor. These are not really designed for cameras, although it will of course work. Instead, I replaced it with this solution:

Runshuangyu Movie Blackmagic Cinema Camera BMCC 4K BMPCC Power Supply Mount Plate Adapter for Sony NP-F970 Battery https://www.amazon.com/dp/B07MMZRKWK/ref=cm_sw_r_cp_apa_i_6HKgDbDN4VXAY

Powerextra Multifunctional Battery Pack Power Bank with USB Output for Sony NP-F970, NP-F975, NP-F960, NP-F950, NP-F930 Battery and Smart Phones https://www.amazon.com/dp/B01M189SS0/ref=cm_sw_r_cp_apa_i_NIKgDbZD7HP5T

Much more manageable and the bricks can power two more items plus the camera simultaneously. I've got 4 bricks and each will last between 1.5-2 hours on a charge.

Also, the brick you ordered takes FOREVER to charge up.

As some friendly advice, I'd cancel your order and instead go with the solution above. I'm confident you'll be more satisfied.

Yes!
I use this combination as a battery solution:

https://www.amazon.com/gp/product/B01N3TWBXI/ref=ox_sc_act_title_2?smid=A1SDRS5D54HY4U&psc=1

https://www.amazon.com/gp/product/B07MMZRKWK/ref=ox_sc_act_title_4?smid=AGNG3CODDNL8&psc=1

When I'm using it with the Ronin S, I rig it on the side using 1/4" accessory I picked up from amazon.

I wouldn't expect a USB-C charge to work fast enough to make it that usable but there are dummy to USB charger adapters on amazon for the GH5 to power it from a USB power bank. It gives me about a 5.5 hour life from a 10,000 mah power bank, up from the 1.8 to 2 hours from a standard battery. I can't find an exact kit for a LP6N, but I think you could use that GH5 kit and a dummy battery for the Canon and link them up? Check all your voltage before you go trying it though!

There are Sony NP battery to Weipu taps that you can use also and those are a simple solution as far as size and weight to battery life. The one below is ok, works fine but it's screw connector is totally stupid, I drilled out the threads to use it properly.

Weipu to NP plate

USB bank for GH5

I ended up going with this combo.

2 PowerExtra batteries

npf adapter (has 12v bm power + dc port for dummy battery)

2 Telesin LP-e6 batteries with charger + sd reader

anker multi usb charger (60w) to charge the Powerextra batteries and whatever else needed.

​

I also picked up the smallrig cage. ill pick up the tilta later one along with a matte box so i can start adding some 4x4 filters to the collection.

Here is the Amazon link. $45. I'm linking this via my phone so hopefully it works. Runshuangyu Movie Blackmagic... https://www.amazon.com/dp/B07MMZRKWK?ref=ppx_pop_mob_ap_share

Hey... not too much to ask at all -

​

Here are the links to the battery mount and cable I am using. Here is the one similar on Amazon that has the correct cable attached but this is not the setup I have.

​

Here is the smallrig mount that is on the Crane 2 that my battery mount is attached to.

​

I have also mounted this SSD case directly on the crane 2 under the camera and it works perfectly since the ssd and crane move together so you can use a short USB-C cable.

​

Hopefully that helps. Good luck setting your up. I'm loving it!