Reddit Reddit reviews Scotch Rough Surface Extra Strength Painter's Tape, 0.94 in x 60 yd, 2060, 1 Roll

We found 2 Reddit comments about Scotch Rough Surface Extra Strength Painter's Tape, 0.94 in x 60 yd, 2060, 1 Roll. Here are the top ones, ranked by their Reddit score.

Paint, Wall Treatments & Supplies
Masking Tape
Tools & Home Improvement
Household Painting Supplies & Tools
Paint Supplies Tape
Scotch Rough Surface Extra Strength Painter's Tape, 0.94 in x 60 yd, 2060, 1 Roll
Designed for use on concrete, brick, stucco, and rough wood5-day clean removal leaves behind no damage or sticky residueVery strong adhesiveRecommended for use with or on lacquer coatingsBonds aggressively, yet has a smooth unwindSize: 0.94 in. x 60.1 yd.CREATE SOCIAL DISTANCING MARKINGS: Create box or “X” queues for waiting areas or make lanes in aisles in a fast, easy, and efficient way – whether it’s short- or long-term usePack Size: 1 Roll/Pack
Check price on Amazon

2 Reddit comments about Scotch Rough Surface Extra Strength Painter's Tape, 0.94 in x 60 yd, 2060, 1 Roll:

u/megustachef · 5 pointsr/aviationmaintenance

Not OP, but it looks like the same thing I use

u/Mako18 · 2 pointsr/AutoDetailing

I finally got around to fixing the cloudy lenses on my 2001 VW Passat.

http://imgur.com/a/HvVe9

I used:

  • 3M headlight restoration kit
  • 3M Green Masking Tape
  • DeWalt corded power drill
  • Microfiber cloth

    A couple notes for anyone considering doing the same:

  • Definitely use at least two layers of tape anywhere the sanding disk might make contact with the body. Keep a close eye on the tape to make sure you're not wearing through. The shape of your headlights and front-end may make it easier or harder to avoid hitting the masked areas. Remember: tape: $7/roll, fixing a spot that you sanded through on your bumper: more than $7
  • My drill had a max RPM of 2600, directions call for a max of 1600 RPM, so I was careful to avoid going "full throttle". Going too fast can cause things to get too hot when sanding, and cause more harm than good.
  • Don't be stingy with your sanding disks. You'll probably have extra, but making a couple extra passes is much better than a couple too few, because if you don't take off enough material at any stage, it will be difficult to compensate later.