Reddit reviews SE Helping Hand 3x Magnifier with Flexible Neck LED Flashlight - MZ1013FL

Its been a while but I used soldering helping hands Clamped in a mini vise. It worked out great. I also put pieces of heatshink on the end of the jaws to minimize marring.

I use this one
http://www.amazon.com/gp/product/B000Z7GGJC/ref=oh_details_o04_s01_i00?ie=UTF8&psc=1
It has mounted LED so your work is lit well and its just as cheap really. I put the wick and a paperclip in the alligators and use the magnifying glass to roll it really close and verify the proper spacing between coils.

It looks like people have mostly got you started here in terms of supplies. In terms of tools though, this is what I keep in my rebuilding stuff (linking to Amazon just because its easier):

• Small screwdriver set OR Hex set OR a combo set. Which one will depend on the RBA you get, but eventually you'll probably find yourself with ones that have Phillips and Hex screws.
  
• Butane Torch. You can get this same one on Fasttech for $4 if you don't mind the shipping time.
  
• Wire cutters, either full size or micros
  
• Pliers, I also have a set of channel locks accessible, but not in my normal kit, mainly to try and get my Bombshell Stinger apart
  
• A generic desk light or something like helping hands can save a lot of headaches.
  
• Cheap multimeters can be found from $5 - $20
  
• Exacto knife because knives always come in handy at some point (rule #9)
  
  Other generic stuff:
  
  
• Toothpicks (great for wrapping coils around)
  
• Cotton swabs, cotton balls and paper towels
  
• Bic lighter
  
• Scissors for cutting wick (I use the wire cutters, but if you have micros, 3mm wick might get messy/frayed)

The helping hand Magnifier would sure help out me and my partner out when it comes to soldering our electronics in our studio. Especially since we have been using This one from Radio Shack. Especially cuz he can not deal with those little electronic parts, a light and magnifying glass would help a lot.

My favorite magnifiers as someone who does bench work, beading, wire wrap, stonework:

http://www.amazon.com/SE-1013FL-Helping-Magnifier-Light/dp/B000Z7GGJC/ref=sr_1_6?ie=UTF8&qid=1405451223&sr=8-6&keywords=helping+hands

http://www.amazon.com/Microscope-Jeweler-Currency-Magnifier-Adjustable/dp/B00AQAANDS/ref=sr_1_9?ie=UTF8&qid=1405451254&sr=8-9&keywords=jewelers+loupe
(this thing is so much fun, and I keep one on me when running around goodwills)

http://www.amazon.com/Housweety-Professional-Jewelers-Lighted-Magnifier/dp/B005VIG6TA/ref=sr_1_1?ie=UTF8&qid=1405451281&sr=8-1&keywords=jewelers+magnifier

None of these are expensive and all are very useful.

Sorry for the late reply. First of all, take all of this with a grain of salt. This is my first build, so I am by no means an expert. You should definitely look in to all this on your own rather than blindly trust my purchases.
Here are the tools I got in my Amazon order:

• Wire Stripper
  
• No Clean Flux Paste
  
• XT60 Connectors
  
• 60/40 Rosin Core Solder
  
• Loctite Threadlocker 242 (blue)
  
• Weller 40 Watt soldering station
  
• Solder tip cleaner
  
• Helping hand with LED
  
• Bullet connectors
  
• Liquid electrical tape
  
• Heatshrink variety pack
  
• Chisel tip for soldering iron
  
• Servo cables
  
• 12/14/16 AWG silicone wire
  
• Zip ties
  
  I hope this helps.
  
  

>You don't need a soldering iron to fix a knob...

Oops, I meant to say that I broke the pot. I tried pulling the knob gently while also rocking it back and forth but I still managed to pull the shaft out of the brand new pot.

Sorry for the confusion; my phone was at 1% so I was typing fast. Perhaps I should have proof-read.
>Electrical work on guitars isn't really maintenance, as you should do it right the first time and never have to worry about it again. Unless you're really into modding and replacing pickups, I wouldn't jump on it.

Haha, I've managed to break an electrical part twice in the past month, and I expect it to happen at least a few more times as my guitar collection grows. I figured it would probably be cheaper and fun to learn how to do it myself.

>A multi angle vice can be very helpful as well.

Like this or this?