Reddit reviews SMALLRIG DV Battery Plate Adapter for BMPCC/BMCC/BMPC - 1765
We found 8 Reddit comments about SMALLRIG DV Battery Plate Adapter for BMPCC/BMCC/BMPC - 1765. Here are the top ones, ranked by their Reddit score.
SMALLRIG DV Battery Plate Adapter for BMPCC/BMCC/BMPC 1765 is a battery adapter which fits securely on the back of F970/F750/F550 battery on the rear of the panel.It gives users the ability to converting voltage to 12v easily and attaches camera battery normally used with camera for BMPCC/BMCC 2.5K/BMPC 4K.It helps to support 12V DC power input and extend battery life. This Adapter offers red led indicator to show power on.There is a 1/4 threaded hole at bottom for rig attaching, and a velcro for tripod connection.Compatible with: camera for BMPCC / BMCC 2.5K / BMPC 4K (F970/F750/F550 Battery)
Just get an NPF adapter and a couple NPF batteries. It would probably cost you around $60 and accomplish the same thing with a much smaller footprint.
https://www.amazon.com/SmallRig-Battery-Plate-Adapter-BMPCC/dp/B01EFSUK98
https://www.amazon.com/DSTE-Replacement-MVC-CD1000-DCR-VX2100E-NEX-FS700RH/dp/B00M3P9YBQ
https://www.amazon.com/Wasabi-Power-Battery-Charger-NP-F730/dp/B00FPZY0BK
One of those batteries will keep you going for several hours.
u/cityescape3 - the least expensive way to get 3 hours of continuous shooting is with a $19.99 SmallRig battery plate, a $24.50 12V to Weipu cable and a $37.99 set of two NP-F970 batteries & a dual charger.
You can attach the plate either to a pistol grip (as seen here) with a 1/4"-20 male to male screw or use the included bracket to attach it to the top of the camera - as seen in this video with the OG BMPCC .
This should be relatively easy to do with your cage.
Hope this is helpful and good luck finding the right external power solution for your needs!
There are NPF plates that output 12V. I'm using this one, but I recommend getting the tilta plate or any with a metal case. Using an NPF 970, I'm getting about 2h30m plus an extra 20-30 minutes with the internal LPE6 battery (I use this 20-30 minutes l window to swap in a new NPF battery)
https://www.amazon.com/gp/aw/d/B01EFSUK98/ref=psdcmw_13535461_t1_B01DLKW5LM
SMALLRIG DV Battery Plate Adapter for BMPCC/BMCC/BMPC - 1765 https://www.amazon.com/dp/B01EFSUK98/ref=cm_sw_r_cp_api_i_DtFRCbXNV24KD
DSTE 2X Replacement Li-ion NP-F970 Battery for Sony DCM-M1 MVC-CD1000 HDR-FX1 DCR-VX2100E DSR-PD190P NEX-FS700RH HXR-NX3 Camera as NP-F930 NP-F950 NP-F960 https://www.amazon.com/dp/B00M3P9YBQ/ref=cm_sw_r_cp_api_i_auFRCbXZTK8MB
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F372617342876
This setup is like $70 and it gives you 6 hours of power
Some options:
Tilta WLC-T04-BP-18650 Power Supply Box with USB 5V and DC 8V Power Output for BMPCC 4K Camera Cage Follow Focus Moto https://www.amazon.com/dp/B07WNCNX9Q/ref=cm_sw_r_cp_apa_i_30CRDb6YFQ2QV
Tilta Side Focus Handle TA-SFH1-97-G for Tilta BMPCC Camera Cage Type I (F970 Battery) Tilta Gray https://www.amazon.com/dp/B07X198GNJ/ref=cm_sw_r_cp_apa_i_c6CRDb3MQCYYP
SOONWELL 70Wh Power Grip Battery Handle for Camera BMPCC 6K 4K Canon 5D 6D Camera Cage Rig with DC D-TAP USB Output & LP-E6 Dummy Battery -PH70 https://www.amazon.com/dp/B07XQ6R7SC/ref=cm_sw_r_cp_apa_i_L7CRDbJ332MT8
Core SWX Powerbase Edge Battery for Blackmagic Design Pocket Cinema Camera 4K https://www.amazon.com/dp/B07JFDZTXL/ref=cm_sw_r_cp_apa_i_29CRDbTN3Z3CX
Tilta TA-BTP-F970 NP-F970 Battery Plate for BMPCC 4K Cage Blackmagic Pocket Cinema Camera 4K Rig https://www.amazon.com/dp/B07RQXQT27/ref=cm_sw_r_cp_apa_i_h4CRDb64BKDSN
Runshuangyu Movie Blackmagic Cinema Camera BMCC 4K BMPCC Power Supply Mount Plate Adapter for Sony NP-F970 Battery https://www.amazon.com/dp/B07MMZRKWK/ref=cm_sw_r_cp_apa_i_r2CRDbRE6E4MZ
SMALLRIG DV Battery Plate Adapter for BMPCC/BMCC/BMPC - 1765 https://www.amazon.com/dp/B01EFSUK98/ref=cm_sw_r_cp_apa_i_Q2CRDbTMMYAS4
This. This is the easiest/cheapest way to go. This plate and take your pick of battery capacity from this brand, DSTE.
The NP-F 970s last about 3-4 hours depending on conditions and the much smaller NP-F 550s last over an hour, up to 2, again, depending on conditions.
I found using a cage for the BMPCC like this was helpful for attaching it. It’s definitely not a perfect solution but absolutely one of the cheapest. The biggest fault I’ve found would be that the Battery plate gets absolutely no feedback from the camera, so it constantly drains the battery until you physically unhook it from the plate, even when not charging/powering the camera.
I’ve also heard great things about this battery/power solution from a lot of guys who use the BMPCC and BMCC but haven’t used it myself. I can confirm that a 12v usb battery bank will also do the job, I use the same cord from my battery plate to connect it but you can order them separate simply by searching amazon for “BMPCC Cords”
I know some people use a Sony battery plate that they'll attach to their top handle or something. (I've attached a Canadian link, I'm sure you'd find more on US eBay or Amazon. The search term I used was Sony NPF battery adapter BMPCC.)
https://www.amazon.ca/gp/aw/d/B01EFSUK98/ref=pd_aw_sim_sbs_504_1?ie=UTF8&psc=1&refRID=TRWJG3SS4Z3Y0WGB3M50&dpPl=1&dpID=61l6dmcnhQL
I got one of these and it was a game changer for my BMPCC - https://www.amazon.com/gp/product/B01EFSUK98/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
You could probably mount this on the gimbal handle and just run the cable to the camera, probably solve your problem in one go.