Reddit reviews Supermicro SuperServer 5028D-TN4T Intel Xeon D-1541, 10GbE, Hotswap Mini Tower Server
We found 4 Reddit comments about Supermicro SuperServer 5028D-TN4T Intel Xeon D-1541, 10GbE, Hotswap Mini Tower Server. Here are the top ones, ranked by their Reddit score.
Intel Xeon D-1541 8-Core Processor; Dual 10GbE, Dual GbE, Dedicated IPMI Port4 x 3.5" Hot-swap Drive Bays and 2 x 2.5" Drive Suppot; Supports M.2 (SATA and PCIe)Supports 6 x SATA 6.0Gb/s; RAID 0, 1, 5Supports 128GB ECC/Non-ECC DDR4; 250W 80 PLUS Bronze Power SupplyWeight: 15lbs
You are basically going for a unicorn. So be prepared to pay:
This fits the bill. I have a few and they are great little servers.
This would more than cover the passmark.
Both those towers have 4x3.5" hotswap drives and spots for a pair of 2.5" SSDs. Plus you get an SATA M2 SSD slot. Up to 128GB if you are willing to sacrifice body parts.
The D-1541 a bit shy on the passmark, but hits all the other marks. Only the highest E3s come close on passmark, but they are still short of the Xeon D. And I dunno about having something prebuilt in that nice little form factor. Those Xeon D towers really are great little servers.
I ended up doing a bit of research on this.
https://www.amazon.com/Supermicro-SuperServer-5028D-TN4T-D-1541-Hotswap/dp/B00Z7O7EAS/
This is essentially the same system, with a built-in Xeon-D, 2x 1Gbps, 2x 10gigE, and support for ECC memory.
https://www.amazon.com/Supermicro-Barebone-Components-Other-SY-528LTN2/dp/B0188QLIIK
This one is similar, but instead of the built-in Xeon-D it has an empty socket that supports a Xeon e3, also ECC memory (but no 10GigE).
Both have only one usable expansion slot, so if you need SAS drives, you'll need a card - so you'd want to select the first one (unless you don't need 10gigE)
You could get by with less than what I suggest here, pretty much any PC that support ECC ram will run server 2016 and most mother boards have RAID support, but for for not crazy money you can build a server that should perform well for years. I looked high and low and wrung my hands and this is what I'm building:
​
Supermicro TN4T Server
https://www.amazon.com/gp/product/B00Z7O7EAS/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
supports 128GB of ECC ram (i'm running 64)
512 GB M.2 SSD for OS FMS and internally stored containers (my solution stores a few documents in internal containers)
1TB SSD for referenced Containers
2x 2 TB hard drives for backups configured as a mirrored raid at.
Off machine backup to a NAS (Synology DS413) on our LAN
Off site backups to Backblaze.
​
​
Fire at will.
​
​
​
​
​
​
​
​
​
​
​
​
​
​
A little above your budget, but this SuperMicro 4-bay Xeon-D server is what I am planning to get for my next NAS:
https://www.supermicro.com/en/products/system/midtower/5028/SYS-5028D-TN4T.cfm
https://www.servethehome.com/supermicro-sys-5028d-tn4t-review-small-box-big-power/
https://smile.amazon.com/dp/B00Z7O7EAS/