Reddit reviews Surebonder 8510 6-32, 8-32, 10-24, 10-32, 1/4-20 Threaded Insert Tool
We found 1 Reddit comments about Surebonder 8510 6-32, 8-32, 10-24, 10-32, 1/4-20 Threaded Insert Tool. Here are the top ones, ranked by their Reddit score.
The product is easy installation and easy handlingThe product is manufactured in ChinaThe product is easy to use and highly durableInserts into thin metal, plastic or fiberglassComes with 5 threaded mandrels and nosepiecesNosepiece sizes included: 6-32, 8-32, 10-24, 10-32, 1/4-20Comfort gripInserts sold separately.Inserts into thin metal, plastic or fiberglassComes with 5 threaded mandrels and nosepiecesNosepiece sizes included: 6-32, 8-32, 10-24, 10-32, 1/4-20Comfort gripInserts sold separately.
The part you have called a washer, isn't, it is the flange of the rivnut that is now spinning in the seat tube as it has lost clamp force.
Try u/twodogsfighting suggestion and use an impact gun (if you have one) to remove the fastener, if it won't come out, you can try a small amount of cyanoacrylate (super glue) to see if you can get it to wick into the joint and hold enough to allow the fastener to be removed.
If this doesn't work, then you will have to utilise a destructive method. Starting with the plastic bottle cage, to gain access to the rivnut, then try placing a screwdriver between the fastener and the rivnut and twisting to lock the nut, then impact the fastener out.
If there is room, you may be able to grab the rivnut flange with pliers or vise-grips, then undo the fastener.
Last resort, cut the fastener and grind of the flange of the rivnut and then retrieve the remains by removing your seat post.
Take the frame to a bike shop to have them install a new rivnut, unless you want to invest in the setting tool
Good Luck