Reddit reviews SurgeTech Q1C1 Eachine EF-01 FPV Micro Aio Camera 40CH Transmitter Combo for FPV Indoor Drone Like Blade Inductrix Etc
We found 1 Reddit comments about SurgeTech Q1C1 Eachine EF-01 FPV Micro Aio Camera 40CH Transmitter Combo for FPV Indoor Drone Like Blade Inductrix Etc. Here are the top ones, ranked by their Reddit score.
All in one 5.8G 40Ch 25Mw VTX 800TVL CMOS Camera with FPV RHCP circular polarization Clover leaf antennaFive bands 40 channels with race band, micro size: 26x20x18mm, light weight: 6.8GLens mirror Diameter is 2.1mm IR blocked FOV 150 (horizontal), 150 ° FOV horizontal viewing angle of 170 ° dfov diagonalPackage including: 1 * ef-01 AIO FPV camera, 1 * cable, 1 * blade Inductrix Ultra micro JST Y Splitter, 1 * Micro JST 1.25mm Connector cable, 1 * User ManualFor the control button: 1 second is switch 1, 2, 3, 4. 2 seconds is switch a, B, C. 5Senconds is switch NTSC PAL, Blue light is NTSC, without light is PAL.
it is the Eachine EF-01 camera. https://www.amazon.com/gp/product/B01HZ63JD6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
(the first picture on amazon should help with my description)
It is kind of oddly connected. The camera has a connector on the back of it instead of wires. It included a connector (that looks very similar to the battery connectors) that 2 wires coming out of that. I Soldered those two wires to the top of the board where the battery input is on the bottom. I then rubber band the camera in place.
So essentially I have soldered a red and a black wire to the points where the battery inputs where already soldered to the inductrix board. On the other ends of the red and black wires I added, there is a connector that plugs into the camera.