Reddit reviews TEKTON 3797 7-Inch Wire Stripper/Cutter
We found 4 Reddit comments about TEKTON 3797 7-Inch Wire Stripper/Cutter. Here are the top ones, ranked by their Reddit score.
Ergonomic single curve handle design for more comfortable grip and better leverageSelf-opening, spring-loaded hinge with safety lockStrips solid and stranded wire sizes 10-20 AWG; cuts screw sizes #8-32 and #10-32Shear-type wire cutterLooping holes bend wire ends to fit around screw terminals
You need speaker wire. Unless you need very long lengths 16 gauge wire is good enough.
https://www.amazon.com/Performance-Gauge-Speaker-Oxygen-Copper/dp/B01N6EF3GZ
And a wire cutter for a clean job:
https://www.amazon.com/TEKTON-3797-7-Inch-Stripper-Cutter/dp/B00AZWWY2K
You can also buy banana plugs to install at the tips. Once you do this you never have to waste time inserting bare wire carefully into the posts.
https://www.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC/ref=pd_aw_fbt_23_img_2/143-4216225-4180333?_encoding=UTF8&pd_rd_i=B0097JLQVC&pd_rd_r=9abe4956-cd3f-4392-835d-422b349f4f55&pd_rd_w=w5ces&pd_rd_wg=578Lx&pf_rd_p=6e6afc8a-fbbd-4649-97cf-4e08f5113612&pf_rd_r=ZXGYDM5KD6H0FC4Z4S8M&psc=1&refRID=ZXGYDM5KD6H0FC4Z4S8M
Well, I don't think there are really that many specialized tools the average user would need. I guess if you want to do some minor modifications or sleeve your psu, you would really benefit from some specialty tools. Generally speaking, I think nearly everyone would benefit from:
total: $15.60
It goes without saying that you should also have a Phillips screwdriver, but who doesn't have one of those around anyway? Of course, there are some extras you might want if you're messing with your psu cables (like if you're sleeving them or whatever), installed and reinstalling coolers, I don't know. It is all stuff I've used with my PC at one time or another.
total: $48.61
I don't know why you'd really want that ultra-mega-deluxe $49 kit I put together, unless you're certain you will be modding your pc. If you want to be all hardcore you could get a soldering iron just for your pc, but I wouldn't recommend doing that unless you already have experience. Seriously though, everyone should get some cable ties and compressed air.
I like using AVR's for quite a few reasons. Sharkamino linked you some really good options and I'm going to second that. If you're using this for music and home theater the AVR will give you the most flexibility and features. Going refurb is a good way to save money but still get some decent gear.
​
You could get by with a mini amp but honestly one with the features that I would want would be almost as much as a refurb AVR.
​
For cables I don't see going crazy with them. You'll need some speaker wire and that's about it. You can get banana connectors as they make it nice and neat but if you're not planning on changing out the speakers often bare wire is fine. A set of wire strippers would be nice and they will come in handy if you're getting into the hobby.
For other cables then Amazon Basics will do just fine.
You cut the wire to length yourself. I change my setup a lot so I've used up over 100ft of wire, but 50ft might last you forever if you never move anything.
Amazon or Monoprice is my goto for cheap wire. You'll want a wire stripper as well.
Here's a great graphic I cooked up in MS Paint to go along with the steps below.
Not all wires are marked black / red, but they'll all have some way to identify the difference. Just double check you aren't wiring stuff backwards. I also separated the two wires in the 4th step to make it more clear, don't do that IRL.