Reddit reviews TEKTON 6555 Rivet Gun with 40-Piece Rivets
We found 9 Reddit comments about TEKTON 6555 Rivet Gun with 40-Piece Rivets. Here are the top ones, ranked by their Reddit score.
Rugged all-steel constructionDurable black wrinkle finishNonslip cushioned handle gripsRivet heads and wrench store in handleRust-proof aluminum rivets
Very nice quiver and thanks for my next project. I really love working with leather.
For those who want to get started it's not that expensive of a hobby. As for leather it's actually fairly cheap and most projects don't go over $25 in supplies. It's about $100 to get the tools you'll need and although their not top of the line they will last quite a while.
Tool 1 |
Tool 2 |
Tool 3
Tool 4 |
Tool 5 |
Tool 6 |
Tool 7 |
Tool 8 |
Tool 9 |
Tool 10
It is also known as a pop rivet, to be used with a pop rivet gun.
https://www.amazon.com/TEKTON-6555-Rivet-40-Piece-Rivets/dp/B000NPT74C
rivet gun
https://www.amazon.com/TEKTON-6555-Rivet-40-Piece-Rivets/dp/B000NPT74C
https://www.youtube.com/watch?v=yW3k3_sbkyc
not at all, rivets are way, WAY easier to remove than rusted and stripped screws.
Use a drill with a bit slightly larger than the hole in the middle of the rivet
Once you try it, you'll see that rivets are way, way less permanent than you would first think.
You can even re-assemble it when you're done with a cheap rivet kit. Or use a screw.
Ah, you don't want pop rivets, you want grommets. But I suspect that what you ultimately want is something like this, and they come in plenty of colors to boot. The nylon is not really good for grommets, but you could hang the bags on some hooks.
Rivets can be replaced - it just depends how you want to deal with the paint. Rivet gun, rivets. That said, I probably would just leave it together for painting. Happy hunting!
Yes, about 565 is your circumference. The thickness of the sheet metal might throw you off a little bit though. Leave some extra, depending how you join them. I would get a rivet gun on amazon for $12.
You can simply overlap the ends and rivet it, or you can fold both end in at 90 degree angles (+ a few degrees to keep the circle) and rivet them on the inside.
https://www.amazon.com/TEKTON-6555-Rivet-40-Piece-Rivets/dp/B000NPT74C/
This is all you need. Put a rivet in the gun, line the rivet tip up with your mag's pinhole and squeeze.
I'd get a pop riveter and rivet it back on.
http://smile.amazon.com/TEKTON-6555-Rivet-40-pc-Rivets/dp/B000NPT74C/ref=sr_1_1?ie=UTF8&qid=1451337214&sr=8-1&keywords=riveter
$12 and it comes with the rivets.
I'd use a cheap H&M belt as a source of p/leather. Or maybe go to nylon - it's pretty tough stuff. Wrap through the handle then loop & river to the metal pieces. Once that's assembled rivet the metal pieces to the body of the bag.