Reddit reviews VIVO Dual VESA Bracket Adapter, Horizontal Assembly Mount for 2 Monitor Screens up to 27 inches (MOUNT-VW02A)
We found 10 Reddit comments about VIVO Dual VESA Bracket Adapter, Horizontal Assembly Mount for 2 Monitor Screens up to 27 inches (MOUNT-VW02A). Here are the top ones, ranked by their Reddit score.
COMPATIBILITY - Holds 13" to 27" computer monitor screens weighing up to 22 pounds eachVESA - Bracket Adapter designed to mount to an existing single vesa monitor mount or stand. Fits VESA 75x75mm & 100x100mm mounting holes (bracket and mounting bolts included)OPTIMAL VIEWING - Curved Horizontal Array creates perfect dual monitor viewingMONITOR ARRAY - Monitors can be installed either in portrait or landscape shape3 YEAR MANUFACTURER WARRANTY - This product comes with a limited 3-year Manufacturer warranty as well as friendly tech support to help with any questions or concerns.
https://www.amazon.com/dp/B01CUSHR1O/ref=cm_sw_r_cp_apa_jgMMBbKBCBPEM
That's the exact one I bought, sorry for not specifying.
It says 27" max but I did my calculations before hand and it is definitely big enough to support a 34" ultrawide and another smaller monitor.
You can actually see some space left on the bar to the left of the vertical monitor. So it's not a tight fit on that bar.
I slightly modified one of thesehttps://www.amazon.com/VIVO-Bracket-Horizontal-Assembly-MOUNT-VW02A/dp/B01CUSHR1O
Could always ditch trying to attach it to the desk and go with a wall mount:
https://www.amazon.com/VIVO-Bracket-Horizontal-Assembly-MOUNT-VW02A/dp/B01CUSHR1O
And cover up the cables on the wall with a cable tray:
https://www.amazon.com/GE-10404-CableNeat-Tubing-Adhesive/dp/B0105U6BA2
That linked one wont work since the cintiq doesnt have vesa holes but the ergotron does.
One user said they would be trying something like this,
https://www.amazon.com/VIVO-Bracket-Horizontal-Assembly-MOUNT-VW02A/dp/B01CUSHR1O/ref=sr_1_156?ie=UTF8&qid=1521994096&sr=8-156&keywords=dual+monitor+arm
it converts a vesa mount into a dual monitor holder. The only question is if the two outer vesa mounts will line up with the holes on the cintiq or not.
there is also this DIY solution
https://www.reddit.com/r/wacom/comments/82rpq8/mounting_the_new_24_inch_cintiq_pro_to_an/
WALI TV Wall Mount Articulating... https://www.amazon.com/dp/B01BCUM766?ref=ppx_pop_mob_ap_share
Two of these, vertically mounted on the same stud, with one of these on the bottom:
VIVO Dual VESA Bracket Adaptor... https://www.amazon.com/dp/B01CUSHR1O?ref=ppx_pop_mob_ap_share
How much mobility are you looking for? This mounting arm can be attached to a desk arm/pole. I dont EVER move my monitors, so it worked perfectly for my build.
What I used is technically not a wall mount, but a single vesa to dual vesa mount adapter. https://www.amazon.com/gp/product/B01CUSHR1O/
The plate is mounted to a 2" thick block of wood with 2" screws, and the block of wood is mounted into a stud via 4 4" long screws.
https://www.amazon.com/gp/aw/d/B01CUSHR1O?psc=1&ref=ppx_pop_mob_b_asin_title
Are the 4 holes on the back not mounting holes? I can create a custom vesa adapter just fine so long as I know those 4 holes are capable of supporting the weight of the cintiq.
Edit: They are mounting holes.
Judging by the pictures and what I can tell about the width of the cintiq, the holes seem to be 75-80mm apart from top to bottom. If that's true and it's 75, then a normal vesa mount would work.
As jerry-rigged as it sounds, I'm honestly hoping to try out one of these to adapt it to an ergotron arm.
I thought I saw a stand and was thinking you'd just place the stand on the shelf. I didn't like stands for that reason - eats up desk space for stability.
If you'd like even more space, you could also mount the monitors on the wall with a wall mount. That would free up all the space the mount base would have eaten up.