Reddit reviews VIVOSUN 800GPH Submersible Pump(3000L/H, 24W), Ultra Quiet Water Pump with 10ft High Lift, Fountain Pump with 5ft Power Cord, 3 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics
We found 2 Reddit comments about VIVOSUN 800GPH Submersible Pump(3000L/H, 24W), Ultra Quiet Water Pump with 10ft High Lift, Fountain Pump with 5ft Power Cord, 3 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics. Here are the top ones, ranked by their Reddit score.
【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.【Warranty】: Super durable & reusable; Comes with 2-Year warranty; Any problems with the item you received, please contact us without hesitation.
I would just build your own dude. All those aero cloner things are is a manifold with (x) amount of holes drilled in and (x) amount of mister heads, a decent submersible pump, a container with a lid (or manufacture a lid to fit out of Styrofoam or something similar! Bonus here is you also get inserts to stick the clones in safely) Create a manifold to fit your container. Make it a capital H shape sort of like this.In the middle of the 'H' use a Tee so you can make the connection to the pump. Tap the holes, for this application you could just find some screws with similar threading and drill/remove the manifold to tap for the misters. Connect the manifold to the pump and stick it to the bottom of the container, then fill with water (can use light nutrient solution) right up UNDER the manifold, not over it. While your pump soaks for a second, cut holes in your lid. (or cut lid to fit if using foam) Remember to make a little slot for the pump cord! Give the pump a test run AWAY FROM STUFF YOU WANNA KEEP DRY! Make sure all the misters are spraying good and not leaking (at least not too bad, no need to be mega perfect here) Then just get your clones ready! I know lots of guys that just use the insulation squares(rock wool) and just make the lid holes to fit them. I personally like the foam approach as is just feels better for me and i feel like it will give less problems with mold and other yuckies. I like to top it off with a light cabinet handle right in the middle so you can easily lift the lid (I just basically stole the handle from countless other aero cloners please dont sue me clone king lol) With this method you can make many smaller cloners or some bigger ones just dial up on the pump GPH! Just my opinion, many smaller ones might be easier to work with as youd have all the separation you need for organizing! Happy cloning bud!
This is the type of setup I want. My current grow is sorta getting underway already so I probably can't rig this up for this time around, but I'll tinker with something like this for next time.
Is a pump like this what I need?