Best scooter replacement wheels according to redditors

Just get one of these

O2COOL Deluxe Necklace Fan Bundle - Teal And Blue https://www.amazon.com/dp/B0716L7MBG/ref=cm_sw_r_cp_tai_leZLzb9D2Y5QZ

Also curious about this. I saw a couple of different style "solid" tires. One looked really interesting because the inside where the tube goes it was a bunch of walls that went across the tire. I was thinking those would possibly still give some shock absorption. So hopefully someone has tried it out.

​

Edit:

Like this:

https://www.amazon.com/SPEDWHEL-Universal-Explosion-Proof-Pneumatic-Replacement/dp/B07RWSVHDJ/ref=sr_1_1?keywords=10x2.5+spedwhel&qid=1562960587&s=sporting-goods&sr=1-1-catcorr

We are looking at this one: https://www.amazon.com/Scooter-Inflation-Aluminium-Pneumatic-Electric/dp/B01CJ3Q572/

There are a lot of challenges in our way, but we are making progress. We will post updates as progress is made. First prototypes have been printed on a home printer, we will make some cost optimization and changes for shapeways printing.

I was just looking at these tires and they mention a helpful video, FWIW. On a Minipro board one guy said something about using cheap mini bike tools and zip ties. That's all I got--hardly sage, but I mean well. :)

I used this [solid tire ](OTBBA Solid Tire Replacement for... https://www.amazon.com/dp/B07P5WZ9XL?ref=ppx_pop_mob_ap_share) to replace my rear wheel after it was punctured. (Alternatively, you could buy a [solid wheel already on a rim](GAGAMO Wheel Hub and... https://www.amazon.com/dp/B07TQLCLV4?ref=ppx_pop_mob_ap_share) and save yourself a lot of effort.)

I put some water in a pot on a stove and heated it until boiling, and poured it into a bucket with the tire in it.

I let it sit for 20 minutes and took it out. It should be warm but not too warm to handle. It may have some white marks like rubber stretching, and there'll be a rubber smell.

I ziptied through one of the tire's holes and through the wheel rim and tightened so they stayed together as I worked around the wheel. With a good amount of effort, I used these [tire irons](Dr.Roc Tire Spoon Lever Iron Tool... https://www.amazon.com/dp/B01M3SJ699?ref=ppx_pop_mob_ap_share) to put the the tire on the rim, not worrying about the tire properly seating in the rim. Once the tire is around the rim, use a closed pair of scissors to put through the tire holes and pry up to allow a tire iron scrape under and pull the tire to seat properly.

I did this only with my rear tire and haven't had tire problems since.

these

https://www.amazon.com/dp/B07QLSCMJT/ref=cm_sw_r_cp_awdb_t1_wDzSDbNJB3KKG