(Part 3) Top products from r/Charger

Day one -- get some ZL1 rock & mud guards, hellcat spoiler swap, luxe taillight/sidemarker tints, and inside/door LED light swap. Pretty much the most affordable and easy mods you can do. The spoiler may be a bit pricey.

The rock & mud guards will run you about $95 after shipping.

The luxe taillight and the luxe sidemarker tints will run you about $35 and $25 respectively.

The LED swap can run you anywhere between $10-$30 depending on what you find. This was one of the first links I found. If you want to swap the map bulb (these lights that are above you that comes on automatically) you need to get another kit but it's pretty cheap at around $8.

The hellcat spoiler swap will run you a little over $100 with shipping. The one I linked fits in the holes already drilled for the stock spoiler (if you have one). If you don't have one, you'll need some drilling done. If you have one, you may need to fill a hole or two on either side of the trunk.

Overall these quick and easy mods will run you about $300 or so but will drastically change the look of your car.

Further mods that I recommend are exhausts (catback exhausts are your best bang for your buck, though they'll run you upwards of $1,000+). If you're interested in changing out the exhaust, look up American Thunder by Flowmaster or Borla S-Type/ATAK. If you want to hear what an S-Type sounds like, I posted a video not too long ago. Also, for the exhausts, it doesn't matter if they're made for RWD or AWD. The Chargers aren't different from the cat back when it comes to transmission/drive-train so RWD exhaust systems will fit the AWD vehicles.

A cold air intake can also be a slight improvement. Though there's negligible hp/mpg gains, it deepens the exhaust of the car a bit. I found that after I put mine on, my exhaust had a deeper and more rumbling tone. And, it makes a cool noise too.

It's a 340 Daytona in Octane Red which I ordered from the factory at the end of January. I'm upgrading from a Hyundai Sonata and it's a huge difference! I love the car already. I'm so impressed by the acceleration, the comfort of the interior, the ride quality, and the beautiful NOISE!

Yes, I did take off the curb guards and the dealership stickers.

Need to buy lug nut locks, any suggestions? I'm looking at the Gorilla system on Amazon:

https://www.amazon.com/Gorilla-Automotive-71643NBC-Black-Wheel/dp/B004U3THY8/ref=sr_1_5?ie=UTF8&qid=1519943642&sr=8-5&keywords=gorilla+lug+nuts

https://www.amazon.com/SPPC-Projector-Headlights-Assembly-Charger/dp/B00JBI9W2E/ref=sr_1_16?ie=UTF8&qid=1537897081&sr=8-16&keywords=2010+dodge+charger+halo

Pretty sure they're these ones, but Amazon has a pretty good selection.

I haven't had any problems with police and plenty have seen it. Here's the link

Precut Vinyl Tint Cover for... https://www.amazon.com/dp/B00PQX1XNY?ref=ppx_pop_mob_ap_share

Edit: People have said this one is more difficult than buying a whole sheet of tint to work with, it was difficult but it was my first time and it turned out alright, the day I put it on there were a lot of bubbles but they all went away, just use soap and water and get your taillight all wet before working on it then just try and put the tint on and even it out with a credit card or something. It's not perfect around the edges but I'm very happy with it. I'd suggest checking out a YouTube video of someone doing it, helped me out quite a bit.

Edit 2: Also use a heat gun once it's on how you like it.

Sharpie oil-based paint:

https://www.amazon.com/gp/product/B001PLKRZQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

​

I got 4 of them, but two covered the tires pretty well with about 3 coats each.

I have a Proclip and used it for years with great success.

However, just a few months ago, I decided to give this mount a try. I chose it because of the wireless charging capability. I wasn't sure if I'd like having it stuck to my dash and blocking my line of sight but I was able to position the arm in such a way that it works well.

I got these as floor mats and really like them

3D MAXpider Complete Set Custom Fit All-Weather Floor Mat for Select Dodge Charger Models - Kagu Rubber (Black) https://www.amazon.com/dp/B00IBOK84K/ref=cm_sw_r_cp_apa_i_ciE2DbF89D52P

I use 303 Aerospace Protectant and it works great.

I have these for my car, the matte black looks amazing with the matte black wheels.

https://smile.amazon.com/gp/product/B00JNL64KM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


Gorilla makes a good product as well but I don't think they make red.

I know people have mixed feelings on these but I installed one of these into mine and it definitely makes it louder and gives it a deeper growl when accelerating.
https://www.amazon.com/dp/B007ISGIOE/ref=cm_sw_r_cp_api_2gy9BbGD6VEA2

I got MagnaFlow 35225 Exhaust Tip https://www.amazon.com/dp/B00ODXK4CO/ref=cm_sw_r_cp_apa_zsIfzbFRVKN86 when I did the valance swap. They are 2.5" inlet and 3.5" outlet. They are 5.5" long. The shop had to put a small extension piece to get the tips to stick out right from the existing pipe. So you could possibly get some they are slightly longer and be ok. You might be able to get away with 4” outlets just not sure if they would look cramped or not.

This is what they look like after http://i.imgur.com/MXHDfdn.jpg and http://i.imgur.com/s6QWB0P.jpg

If you need any other pictures let me know I can easily get some for you of how anything looks afterwards.

I think this is what I'll go with. Also looks like Amazon price matched https://www.amazon.com/Mobil-120760-Synthetic-Motor-0W-40/dp/B00HG76A9A/ref=sr_1_1?ie=UTF8&qid=1484927714&sr=8-1&keywords=Mobil+1+Full+Synthetic+0w40

I just ordered the Power Stop z26 kit from Amazon. It was around the same price the dealer quoted me for OEM brakes and they have really good reviews.

Power Stop KC1720-26 Z26 Street Warrior Brake Kit with Powder Coated Caliper https://www.amazon.com/dp/B00KT5EOGM/ref=cm_sw_r_cp_apa_KnsWzbHGJZ79X

These were $175 when I bought them... https://smile.amazon.com/gp/product/B00HQZ7UMI/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

https://www.amazon.com/dp/B00JBI9VHA/ref=cm_sw_r_cp_api_i_qxCzCbS7QDB5P

ebay

Amazon

edit: part# is 68003211AA

Mine was one of the others that's far easier to get to. There are videos on youtube on how to remove the dash bezel and cluster, not that hard but takes some time. There are reviews of the one I bought failing in 3 months but mines been going since last July with no issues.

https://www.amazon.com/gp/product/B00HRSTTMI/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1