(Part 3) Top products from r/GunPorn

Sling is just thick cotton grosgrain ribbon, QD Attatchments can be found all over the place, and so can the strap adjustment buckle, all for super cheap.

>The stitching on the strap is a little difficult, but other than that...

Nah man, not at all. The real item obviously uses a machine, however you can achieve similar results with some scrap leather (Buy "Vegetable Tanned" leather for crafting, takes dye well and is very strong, you may even find a "Belt Blank" kit already cut into a nice neat strap) and some "leather lacing chisels" also known as Pricking Irons. Simply lay out where you want your stitch-box, double your leather over, line up the fork, smack it with a hammer (into a wooden backstop), and there you have it, nice evenly spaced stitchable holes. From there, you just dye the leather however you prefer (Leather Dye works great, but in a pinch, wood stain works fine and double-brewed coffee can work too), finish the edge with a little bees wax and an edge slicker and hand sew it together with some Waxed Thread and some robust Leathercraft Needles. (I might even lay down a layer of contact adhesive between the leather-strap-leather sandwich for additional hold while sewing). Just take your time and be patient with layout and cutting and it would make for a great afternoon project. For a tutorial on stitching leather neatly, check this out and this edge slicking tutorial. Bonus; you can dye the leather and buy whatever color grosgrain and hardware you want to match or contrast to your heart's content.

No problem. You'll probably be cleaning lint etc mostly from it if you plan to carry it around. I tend to go a little overboard when I clean my guns, but I typically don't clean my rifles/shotguns all that frequently and will go between multiple thousands of rounds before I do.

When I clean my guns I use a mat like this to absorb oils etc and this to get all of the black carbon out of it. I use these to clean the bore/inside of the barrel. I use these and these for the hard to reach places that still have something building up on them.

When you're done cleaning everything, you'll want to make sure you put oil/grease on all the components that come in contact with other parts. Basically if it rolls oil it, if it slides grease it. I use this on the slide/rails where they contact each other and use this in most other places. Then I'll wipe down the exterior with this.

Really all you have to make sure you do is get most of the debris out of the gun, and make sure you have oil on surfaces that create friction or need some kind of rust preventative coating.

I bought it here. I'm really happy with it, although it is pretty hard to get on a full length gen 4 grip.

Of course, a lot depends on what shape and size your hands are.

Mine are medium/large and the 92FS fits like it was made just for me. I rock the Hogue rubber grips without the finger grooves and it feels amazing.

​

https://www.amazon.com/Hogue-92010-Rubber-Grip-Beretta/dp/B000KORBWG

I'm glad OP posted this and it's getting good responses. I have one of those lights and it's phenomenal (for the price)! Here's a Link

• Right Side
  
• Left Side
  
• Album (same 2 pictures)
  
• SPR Targets
  
   
  
  Noveske
  
  Lower
  
  
• Noveske Gen 3 Billet Lower
  
• Geissele SSA-E Trigger
  
• Rock River A2 Stock, painted with Aervoe 8343 Coyote Brown
  
• Magpul MOE + FDE Grip
  
• Magpul PMAG 20 FDE Magazine (discontinued)
  
• Magpul Ranger Plate
  
• Magpul B.A.D. Lever
  
• Battle Arms Ambidextrous Safety Selector
  
• Seekins Precision Magazine Release Button
  
• JP JPS-OSC Centerless Buffer Spring
  
• Spikes Tactical ST-T2 Heavy Buffer
  
• Spikes Tactical ST-T0 Buffer Spacer
  
• Harris S-BRM 6-9" Bipod
  
• American Defense AD-BP Bipod Mount
  
  Upper
  
  
• Rainier Arms 18" UltraMatch Shilen Barrel, 1:8 twist, ratchet rifling, with mid-length gas system
  
• Rainier Arms Low Profile 'Match Grade' Gas Block
  
• Rainier Arms UltraMatch Billet A4 Upper Receiver
  
• Geissele 15" SMR MKII Rail
  
• Rainier Arms Nickle Boron Finish Bolt Carrier Group
  
• Rainier Arms Raptor Ambidextrous Billet Charging Handle
  
• Lantac Dragon Muzzle Brake
  
• Vortex Viper PST 6-24x50 FFP MOA-MOA Scope
  
• Vortex SV-2 Switchview Throw Lever
  
• Vortex Bubble Level Anti-Cant Device
  
• Butler Creek flip-open scope caps, size 18, and size 43
  
• American Defense AD-RECON-30 Quick Release Scope Mount
  
• Knight's Armament Micro Flip-Up Rear Sight 200-600m
  
• Troy HK Style Flip-Up Front Sight
  
  
   
  
  
  Colt
  
  
• Colt 6920 M4 Carbine (started as a stock Magpul edition)
  
• Geissele SSA-E Trigger
  
• Battlecomp 2.0 Compensator
  
• Eotech XPS 2-2
  
• Primary Arms 3X Long Eye Relief Magnifier Gen III
  
• Primary Arms Quick Detachable Flip To Side Magnifier Mount (Standard Height)
  
• Troy Industries MRF-C FDE BattleRail
  
• Magpul MOE FDE Grip
  
• Magpul CR123X2 Grip Core
  
• Magpul CTR FDE Stock
  
• Magpul Enhanced Rubber Buttpad
  
• Magpul AFG2 Grip
  
• Magpul MOE Trigger Guard
  
• Magpul PMAG 20 FDE Magazine (discontinued)
  
• Magpul Ranger Plate
  
• Magpul B.A.D. Lever
  
• Troy Rear Folding BattleSight
  
• JP JPS-OSC Centerless Buffer Spring
  
• Spikes Tactical ST-T2 Heavy Buffer
  
• Streamlight TLR1S Weapon Light
  
• Badger Tactical Charging Handle Latch
  
• Noveske QD end plate

Sorry - Amazon. [Here's the one I have on mine!](BBTac - CYMA MP5 Rail Mount https://www.amazon.com/dp/B002TTI7C8?ref=ppx_pop_mob_ap_share)

White/Grey/Black is usually marketed as an urban color scheme as it supposedly blends in with destroyed infrastructure and the like. Not sure what they were going for in the picture though. Looks more like a Zebra AR-15 w/ Anarchist Magazine.

http://www.amazon.com/gp/aw/d/B000BI29ZU?pc_redir=1411843013&robot_redir=1

They are good for manipulating buttons and switches (safety & mag release)

• Nikon 3-9x40 Buckmaster BDC
  
• DNZ Game Reaper mounts
  
• PWS FSC30 muzzle brake
  
• Caldwell XLA Pivot bipod
  
• Karsten's Adjustable Kydex cheek rest
  

https://smile.amazon.com/gp/product/B01A2JSGI6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

https://smile.amazon.com/gp/product/B001B2I9L8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

https://smile.amazon.com/gp/product/B01N9OZFXD/ref=ppx_yo_dt_b_asin_title_o03_s02?ie=UTF8&psc=1

What side saddle ya got on there? Was looking at picking up this one: https://smile.amazon.com/Mesa-Tactical-SureShell-Carrier-Remington/dp/B0030VD526/ref=sr_1_1?ie=UTF8&qid=1522289621&sr=8-1&keywords=Mesa+Tactical+SureShell+Carrier+and+Saddle+Rail+for+Remington+870

So one of these?

https://www.amazon.com/Harris-Engineering-NO-2R-Radiused/dp/B0007OGT40

I was always told, that by using one of them on a synthetic stock, it would eventually crack after repeated use..something about the synthetic stock being thinner than wood, have you had any issues?

Looks like a Pelican case. Foam comes with the case, but you have to cut it yourself with an electric hot knife or pay someone to do if for you. Well worth it, but you want to make sure you don’t plan on adding or changing mods to your weapons once it’s cut.

Pelican 1720 Rifle Case

Not op, but I own 3 10/22’s overall. I only shoot out to 75-100 yards at max. I use Simmons scope because it’s cheap and looks good for the value. No sense in my mind to buy something that more crazy unless you own a ruger precision 10/22

Edit to add link for you

Nothing. They're great holsters. I have one, it has a quick draw to it and its pretty durable. For the price they're perfect. People on here are typically a bunch of opinionated assholes that like to jerk each others cocks into submission over stupid shit.

Amazon has them as well as numerous reviews from customers that own them. http://www.amazon.com/BLACKHAWK-Serpa-Sportster-Holster-Wesson/dp/B000ZDQCIQ/ref=sr_1_1?ie=UTF8&qid=1411334222&sr=8-1&keywords=serpa+holster

I believe that is a Buck Diamondback. Some other online knife retailers have it listed for various prices, but I believe it is no longer being made. I can't be sure if that is the gut-hook model or not.

The revolver, no clue. It was more difficult to find the longer barreled version.

The grips? Amazon, which is where I got mine.