(Part 2) Top products from r/Phanteks
We found 20 product mentions on r/Phanteks. We ranked the 35 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. Noctua NF-A14 iPPC-2000 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM (140mm, Black)
Sentiment score: 0
Number of reviews: 1
Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 2000 RPM, max. 31.5 dB(A), >150,000 h MTTFAward-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency12V 2000rpm model (31.5dB) with 4-pin PWM connector for au...
22. EVGA G2/G3/P2/T2 100-CW-1300-B9 Power Supply Cable Set (Individually Sleeved), White
Sentiment score: 1
Number of reviews: 1
Color: White.High quality with no visible heat shrink tubing. Supports G2/G3/P2/T2 models ONLY1 x 24-pin ATX Cable2 x 4+4pin EPS12V CPU Cable4 x 6+2pin PCI-E VGA Cables2 x 6+2pin + 6pin PCI-E VGA Cables4 x 3 SATA Cables1 x 3 Molex Cable1 x 2 Molex Cable + 1 Floppy Connector
23. SilverStone PWM Fan Hub System Cables, Black (CPF04)
Sentiment score: 1
Number of reviews: 1
1-to-8 PWM connectors2200μF capacitor provides stable voltageSupport speed detection for accurately controlling fans
24. ELECROW 5 Inch Raspberry Pi Screen Touchscreen 800x480 TFT LCD Display HDMI Interface for Raspberry Pi 4B 3B+ 3B 2B+ BB Black Banana Pi Windows 10 8 7
Sentiment score: 1
Number of reviews: 1
5 inch HDMI display with 800*480 mini LCD screen, high resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.It is resistive touchscreen monitor which comes with a touch pen f...
25. Waveshare 7 Inch Capacitive Touch Screen LCD(C) 1024 X 600 HDMI Interface Display Shield Panel Supports Raspberry Pi/PC/Various Systems/Raspberry Pi4 3 Model B
Sentiment score: 0
Number of reviews: 1
1024X600 high resolution,Supports Raspberry PiSupports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images;Supports BB Black, comes with Angstrom imageFor other mini-PCs, driver is required and should be developed by usersNot only for mini-PCs, it can work as a computer monitor just like any...
26. LED Light Cable - TOOGOO(R) 1 to 2 Female 5 Pin Flexible Connector RGBW LED Strip Splitter Cable White
Sentiment score: 0
Number of reviews: 1
1 to 2 5 pin female connection cable for LED RGBW strips.Easy to install, connecting strip to strip, strip to controller.One end to connect with LED RGBW controller, the other end for 2 LED RGBW strips.
27. Phanteks 24 Pin/ 8pin (4+4) M/B, 8pin (6+2) PCI-E Extension Cable Kit 500mm Length, White (PH-CB-CMBO_WT)
Sentiment score: 1
Number of reviews: 1
Length: 19.68” (500mm). Construction AWG: 18AWG, Ø2.1mm (Rohs)Sleeve Tube: PP Material. Conductive Resistance: 0.01 ΩMaxConnector: 24 (2x12) Pin/Male to 24 (2x12) Pin/Female. 4(2x2)+4(2x2)/Male to 8(2x4)Pin/Female. 2(2x1)+6(2x3)/Male to 8(2x4)Pin/Female24 Pin/ 8pin (4+4) M/B, 8pin (6+2) PCI-E Ex...
28. ASUS WS C621E Sage Extreme Power Intel Xeon Processor Workstation Motherboard for Two-way XEON CPU performance, with U.2, M.2 connectors, dual Gb LAN, USB 3.1 Type-C & Type-A, 10 x SATA 6Gb/s ports
Sentiment score: 0
Number of reviews: 1
Extreme power with diverse GPU validation, even up to 4-way Multi-Graphics and total of 12 DIMM slots for hardware-intensive programs to run at brisk paceTwo-way Xeon performance to provide extreme performance with 2-way Xeon overclocking, finely picked components with Platinum efficiencyReliable an...
29. Phanteks PH-LEDKT_Combo: RGB LED Strip Combo Set - Retail Cases
Sentiment score: 1
Number of reviews: 1
Our Phanteks RGB LED strips are extremely bright and are currently compatible with the Enthoo Luxe, Mini XL, Evolv ATX TG, and P400/P400S. M/B with 4pin RGB LED header (+12V, G,R,B) is compatible with PHANTEKS PH-LEDKT_COMBO.Phanteks RGB LED strip has integrated magnets in the silicone housing allow...
30. Mount-It! Triple Monitor Mount | Desk Stand with USB and Audio Ports | 3 Counter-Balanced Gas Spring Height Adjustable Arms for Three 24 27 30 32 Inch VESA Screens | C-Clamp and Grommet Bases Included
Sentiment score: 1
Number of reviews: 1
UNIVERSAL TRIPLE MONITOR DESK MOUNT: Fits 3 displays 24 25 26 27 28 29 30 31 32 inches in size, with a maximum support weight of 15.4 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. (measure distance, in millimeters, between bolt holes in ...
31. Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1
Sentiment score: 0
Number of reviews: 1
Compatible with most GPU/motherboard componentsRedesigned for improved compatibilityPCI E x16 3.0 compatible with 200mm cable lengthEMI shielded design reduces interference1 year Warranty
32. RGB LED Light Strip 4 Pin Splitter - 5 Way Splitter for LED Tape Light (1 to 5 Splitter Cable (Black))
Sentiment score: 1
Number of reviews: 1
1 To 5 Splitter Cable For LED Light Strip1 End to Connect With LED RGB Controller, The Other Ends for 5 Rolls LED RGB StripsCorresponding to the number of plug adapter :6Good Installation Replacement for Connection Strips and ControllerEasy to Install,Durable Material
33. 24 Pieces Set = 24-pin x 4,8Pn x 12,6-pin x 8 Cable Comb for 3 mm Cable Gesleeved Up To 3.4 mm/0.13inch) black,CM245
Sentiment score: 2
Number of reviews: 1
High quality PC cable comb3 different type comb: GPU 6Pin(3+3)x8, GPU 8Pin(4+4)x12, motherboard 24pin(12+12)x4;Fits 3.4mm silver plated cables or bare wireKeep your cables in a good managementPackage Contents: 24-pin *4, 8-pin *12, 6-pin * 8
34. DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header
Sentiment score: -1
Number of reviews: 1
If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only...
35. 3-Pin Fan Cable Y Splitter Extension with Black Sleeving & Black Connectors (6" Length)
Sentiment score: 0
Number of reviews: 1
Black Sleeving & Black Connectors6" LengthOne Female 3 Pin Fan ConnectorTwo 3 Pin Male Fan ConnectorsNote: Only one 3-Pin male connector has a tachometer/speed wire. This is because motherboards/fan controllers cannot accurately read the fan speed when two speed signals are being given simultaneousl...
> So... I think you're saying you don't need to drive anything but the LEDs built into the case, correct? And you specifically want to do it via software, not hardware?
Right. I was just asking whether the case lights (the 4 RGB strips and the RGB ring around the power button) can all be Y-connector-ed to one 12v header, or if that's too much to be putting on one header for voltage or current reasons. And yes, I want everything to be synced up in Aura.
> Generally, but isn't the JST SM connector 3-pin, rather than 4-pin? It is on my case, but it's possible you have something else.
The JST SM connectors coming out of the lights on my case are 4-pin, and Phanteks website (and Amazon) offers a cable that adapts this to the more standard 4 pin RGB connector. So it looks like I'll need two of those (the top cover and front panel lights are each already Y'd together, so you have one wire coming out of each) which I'll then Y together using a splitter with standard RGB connectors at both ends.
> I thought you meant general instructions for a wide range of hookups. If you just meant more comprehensive than they have now, I'd definitely agree with you.
I mean, even just a simple diagram of the RGB contoller's connections and a few notes about what the channels do would have been very helpful. I have no idea how this guy figured out what needs to be connected to what other than simple trial and error.
I just bought the Modmesh Pro RT series (for Seasonic PSU's) kit, so they are all just standard length from their website. There is a little slack behind the cable cover in the back, but not a ton. The only one that's really too long is the molex cable for the pump, and to get the DRGB and the fan hub, and the two drives, and the temp sensor I have is 5 sata power, and the default one comes with a 4 and a 2, so I had to use both, the 4 is a little long, but not too bad, though the 2 is obviously more than I needed for the 1 extra sata power.
And then I bought a couple of these for cable combs as they looked the most like the Cablemod ones: https://www.amazon.com/Pieces-24-pin-8-pin-Gesleeved-0-13inch/dp/B0756XF5ZQ/ref=sr_1_1_sspa?keywords=cable+combs&qid=1570029329&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExS0xMWExHMkhJMVlaJmVuY3J5cHRlZElkPUExMDQwNjI2MzY4Q0pBWDhDTjVYVyZlbmNyeXB0ZWRBZElkPUEwNTczOTg0MjdGWFRYRk8ySDZOWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Okay, like you can see in my photos, I have the lux and the exact same Mobo. That adapter will work just fine.
If you want an adapter plus 2 LED strips that is another option as well.
Sure. Just like this 1. There are a few variants. Yes between psu and shroud.
https://www.amazon.com/Elecrow-RPA05010R-800x480-Display-Raspberry/dp/B013JECYF2
I've only heard great things about the EVGA cables set. If i wasn't trying to save i'd be getting that instead of the Phanteks extensions.
​
EDIT: I got black and going for heavy white lighting and the cables are hopefully going to add a bit more visibility inside. Plenty of colors available from Phanteks and a few from EVGA too !
Did the change the fab hub from the old Evolv ATX? If so, that's a shame. I recommend this one if you plan to use a different one or go towards the splitter route.
Sure, it's this one from MountIt
https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_em_apa_i_2bjXDbEFW9P3D
Looks like it got even cheaper than when I bought it.
Oh gotcha. The one I saw on amazon was without a case.
Waveshare 7 inch 1024*600 Capacitive Touch Screen LCD Display HDMI Interface Custom Raspbian Angstrom Supports Various Systems for All Ver. Raspberry pi Beaglebone Black Banana Pi/Pro Video Photo Kit https://www.amazon.com/dp/B015E8EDYQ/ref=cm_sw_r_cp_api_80OUBb01M6Y1V
I bought something like this to connect everything.
https://www.amazon.com/LED-Light-Cable-Flexible-Connector/dp/B01FLRU1BO/ref=sr_1_12?s=electronics&ie=UTF8&qid=1526892160&sr=1-12&keywords=rgbw+5+pin
Yeah, but could you only use the one from them? What about the on from Thermaltake or did Phanteks made the holes so you can only use their?
Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1 https://www.amazon.com/dp/B06Y5YNGDJ/ref=cm_sw_r_cp_apa_o7gYBbPAE5SDM
https://www.amazon.com/gp/aw/d/B07BHWCGDD/ref=psdcmw_1048424_t1_B00NYVGA7E
I purchased 4 of these fans (3 in the front / 1 in the back) https://www.amazon.com/gp/product/B00KFCRMSG/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
I have all my pieces, my 2080 ti comes in today but still waiting for the case >:(
Well, i found the probem, it is the fucking fan-hub. The white header is kind of defect. I ordered five silent wings 3 140mm and every fan connected to the white header makes stranges noises and spins slower than the other four:
https://youtu.be/sF8T_Ofohr8
I ordered a fan-hub from amazon (deep cool) and now everything works like a charm.
I read that is fan-hub problem is very common on the evolv x, since the release. So did i get an old produced case or is phanteks lazy as shit? Damn, my nerves...