(Part 2) Top products from r/Workbenches
We found 20 product mentions on r/Workbenches. We ranked the 77 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. WiFi USB Microscope, TSAAGAN Built in WiFi Wireless Digital Microscope Camera with 1080P HD 2MP 50x to 1000x Magnification Endoscope for Android, iOS, Smartphone, Tablet, Widows, iPad, Mac PC
Sentiment score: 0
Number of reviews: 1
This microscope lets you experience the thrill and discovery of a whole new microscopic world- totally hidden from the naked eye. TSAAGAN wifi digital microscope a useful, funny and portable wifi digital microscope great for children, students, collectors, testers, and anyone interested in exploring...
22. Shop Fox D3258 Bench Screw
Sentiment score: 0
Number of reviews: 1
1-by-20-inch Long Bench Screw12-inch Sliding HandleCast Iron Screw MountScrew diameter: 1"Screw pitch: 8 threads per inch, Screw length: 17"
23. The Workshop Book: A Craftsman's Guided Tour from the Pub of FWW (Craftsman's Guide to)
Sentiment score: 1
Number of reviews: 1
Used Book in Good Condition
24. Workbenches Revised Edition: From Design & Theory to Construction & Use
Sentiment score: 1
Number of reviews: 1
25. Workbenches: From Design And Theory To Construction And Use (Popular Woodworking)
Sentiment score: 0
Number of reviews: 1
how to build workbenchbuild your own workbench
26. Pony Jorgensen 4x10 In RapidWoodVise, Black
Sentiment score: 1
Number of reviews: 1
Bench vise with solid-steel dog and toed-in jawFor woodworking projectsJaws drilled for optional wood facings (not included)Northern hardwood handle3-1/2-by-10-Inch jaw size with 12-Inch maximum opening
27. Jorgensen 4x7 In RapidWoodVise
Sentiment score: 1
Number of reviews: 1
Bench vise with solid-steel dog and toed-in jawFor smaller woodworking projectsJaws drilled for optional wood facings (not included)Northern hardwood handle3-1/2-by-7-1/8-inch jaw size with 9-inch maximum opening
28. Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor
Sentiment score: 0
Number of reviews: 1
Forrest Sawblade DAMPENER helps kill saw scream-whistle from a vibrating blade surfaceDampen out motor and belt vibrations from being transmitted up to the rim of the teethGreatly reduce cutting noise; Hold blade rigid and true for better cuts on your machineAre hardened and precision ground flat wi...
29. Freud 1-3/4 In Diam by ¾ In Double Flute Straight Router Bit w/½" Shank (12-194)
Sentiment score: 0
Number of reviews: 1
Ideal for general stock removalFeatures Freud's TiCo Hi-Density Carbide cuts for maximum durability, long life and a flawless finishCuts all composite materials, plywoods, hardwoods, and softwoodsUse on CNC and other automatic routers as well as hand-held and table-mounted portable routersUnique she...
30. BLACK+DECKER Workmate Portable Workbench, 350-Pound Capacity (WM125)
Sentiment score: 1
Number of reviews: 1
Durable steel frameNon skid feet prevent slidingMeasures 33.3 by 5 by 5 inches; Weighs 17.8 poundsWork bench holds upto 350 poundsIncluded components: WM125 project center, (4) swivel pegs
31. Akro-Mils 24 Drawer 10724, Plastic Parts Storage Hardware and Craft Cabinet, (20-Inch W x 6-Inch D x 16-Inch H), Black (2-Pack)
Sentiment score: 1
Number of reviews: 1
CABINET DIMENSIONS- 20-Inch x 6-3/8 Inch x 15-13/16 Inch, DRAWER DIMENSIONS- 6-Inch x 4-1/2-Inch x 2-3/16 Inch (large drawer)HIGH QUALITY- Rugged, high-impact polystyrene plastic frame and 24 drawersGREAT FOR– Storing and organizing classroom or office supplies, crafts, beads or sewing supplies, h...
32. Safco Products Metro Extended Height Chair , Ergonomic, Pneumatic Height Adjustable, Heavily Padded
Sentiment score: 1
Number of reviews: 1
ERGONOMIC, PADDED DESIGN. Safco Metro Extended-Height Chair features a form-fitting contoured back and thickly cushioned seat for all-day comfort.HEIGHT ADJUSTABLE. Pneumatic lever under seat provides easy height adjustment from 23" to 33" for a personalized fit. Seat rotates 360 degrees for ease of...
33. WoodOwl 09713 Tri-Cut 1-Inch by 7-1/2-Inch Ultra Smooth Auger Bit
Sentiment score: 1
Number of reviews: 1
Patented Tri-Cut triple edge spurred design for fast, smooth cutting without resistance.Ultra smooth cutting for perfectly finished holes with "blowout".Lighter weight carbon steel construction than standard augers for safety and reduced fatigue without sacrificing strength.Burr-free lead screw for ...
34. Hiltex 53106 Pegboard Hooks Organizer Accessories Set, 50 Piece | Chrome Plated Assortment
Sentiment score: 1
Number of reviews: 1
Peg board hooks are constructed from heavy duty hardened steel to provide maximum strengthCorrosion resistant chrome plating ensures long lasting durability that won't chip and rustCorrosion resistant nickel plating ensures long lasting durability.Set includes 12 different types of attachments for a...
35. Adesso Flexible Full-Sized Keyboard - USB and PS/2 (AKB-230)
Sentiment score: 0
Number of reviews: 1
Waterproof and WashablePortable, lightweight, ultra-slimDirt and DustproofUSB and PS/2 adapter includedLED lights for Caps Lock, Num Lock and Scroll Lock109 Keys
36. National Hardware S819-841 CD8377 51 Piece Peg Board Hook Kit in Zinc,51-Piece Kit
Sentiment score: 1
Number of reviews: 1
Made for 1/8 inch and 1/4 inch pegboardFor use in garages, sheds, workshops and basementsIdeal for storage of tools, paint brushes, extension cords and athletic equipment
37. Adjustable Clamp Co Pony Bench Dog
Sentiment score: 1
Number of reviews: 1
Secure your work.Fits into 3. 4" hole.Width 2 1/4"Depth 3/4"Pony craftmanship
38. Rousseau 2745 PortaMax Table Saw Stand For Dewalt DW745, DWE7480 and Bosch GTS1031
Sentiment score: 1
Number of reviews: 1
Fits DeWalt Model DW745, DWE 7480 and Bosch GTS1031Increase rip capacity to 27"Includes T-Style locking fence for accuracySaw is held securely in place with the "J-Hook" Mounting SystemOptional accessories include Model 2720 Outfeed Table, Model 2710-XL Extension Table and Model 2715-XL Router Exten...
39. Kreg PRS3040 Precision Router Table Insert Plate Levelers
Sentiment score: 0
Number of reviews: 1
These Precision Router Insert Plate Levelers are for the T20365 Keg Precision Benchtop Router TableThis product is easy to use easy to install and highly durableItem is manufactured in United StatesPackage Dimensions : 6.9" L x 4.6" W x 1.1" H
40. Gladiator GAWU12CCTG Clean-Up Caddy
Sentiment score: 0
Number of reviews: 1
The included paper towel holder keeps paper towels neat and in sight in the Garage, while the upper shelf is perfect for sprays, wipes and other cleaning suppliesHeavy-duty steel construction supports up to 25 poundsEasy to install and reposition on separately Sold Gear Wall panels and Gear Track ch...
Gorilla Racks (or equivalent) can be assembled into a workbench; if you purchase a couple of them, you can even get some extra flexibility with assembly and layout. Be sure to the kind with multiple holes, so you can vary the shelving height. Also buy some nuts and bolts to attach units side-by-side. One other thing you'll want to buy is something better for the top surface; use the shelving wood pieces that come with the shelves for the "base" (to align it with the shelving edges), but drill some holes in it and drill/glue a slightly larger piece of 3/4" plywood or something on top. Then polyurethane it to finish it up (alternatively, put a piece of thin steel or aluminum over the top and bend the edges down and screw or glue in place).
Another option if space is tight, and your needs are fairly "light duty" - get one of these:
https://www.amazon.com/WM125-Workmate-350-Pound-Capacity-Portable/dp/B000077CQ0/
Then get a piece of 4' x 4' 3/4" plywood. Open the jaws of the bench up to their widest point and measure it; subtract a 1/2" or so. Cut a piece of plywood out to this width, then center and attach it to the remainder of the plywood with screws and glue. Once that is dry, clamp it into the workbench, then on each "jaw" draw a couple of the "circles" on each plywood side. Then find the center of those circles, and drill thru with a 1/4" drill to the other side. Then on the top side, use a spade bit (say 1" or slightly more) to "widen" up the hole, but only go thru about 1/3 to 1/2 of the way into the wood. Do this for all four holes. Polyurethane the top to finish it.
Get some bolts - flat hex head, or pan-head with phillips or similar - long enough to go thru the top you made, and thru the hole in the bench, plus a bit extra (about an inch); they should be about 1 3/4 to 2" long - 1/4 x 20 - get four of those, four washer to fit into the countersunk holes, four larger fender washers, and four 1/4 x 20 wingnuts.
Chuck the top into the workbench; tighten it up. Drop thru the holes a bolt with a washer, then on the other side, back each up with a fender washer and snug it down with a wingnut. And there you go.
This kind of bench is light duty (or you can get one of the "heavier duty" Workmates if your budget allows for it), but very versatile. For instance, you could make a variety of "tops" to mount tools on that can be chucked into place (or make a "universal" top for several smaller tools) - things like a miter saw, router table, small table saw, scroll saw, grinder, small drill press, etc. You could even potentially make an aluminum top for welding on (welding steel won't stick to the aluminum - or make a steel top if you want). Again, this is only light-duty stuff, but it's portable, lightweight, folds up, etc.
Be sure to pick up additional clamp dogs for the Workmate, and a "repair parts" assortment; these will be handy to keep the main workbench in shape. Also one other tip (kinda OT): If you ever needed to split a piece of transmission hose lengthwise, the Workmate bench has the answer! The jaws have a v-groove, so you can chuck a length of the hose in the groove, then use a box-cutter razor, guided along the edge of the jaw, to cut the tubing down the side in a very straight line. You can probably do this up to about 1" diameter tubing; anything larger would flex too much. I had to do this to custom make some u-bolt "padding" for use on a vehicle roof-rack to protect the cross bars.
If you needed something a bit more heavy duty than the Workmate, Harbor Freight sells a low-cost welding table, that you could make your own custom wood tops to bolt down onto the table (when you weren't welding on it, of course). The table folds up, but it doesn't have any vice-like jaw system, so keep that in mind. It's also much heavier than a Workmate, being made of heavier gauge steel.
Thanks very much. I'm pretty stoked to be able to put this together in the apartment. I realized early on, that despite being summer in Houston, I wasn't (totally) drenched in sweat while I worked. Pretty awesome being inside.
 
The drill guide is this one from Rockler. I ran into the same scattered reviews as you so was hesitant to pull the trigger. I've been mostly happy with this though. It took a little finagling to set it the right way, and to get used to the depth stop, but it's actually been pretty good for what it does. I haven't used it at any other angle than 90*, so I can't really speak to that.
I was disappointed to realize that I couldn't fit the 1" bit I used to drill the holes for the holdfasts. This guide has a 3/4" chuck, and the huge bit I was using needs a 1/2", but that's my fault for not checking.
The build quality is a little wobbly, but you can tighten most things up pretty easily. I will point out: Every bolt and nut on there has a purpose; if something seems wonkey, it is. Play with the tool without a drill attached, and see what everything does and how it works. You'll hopefully find that there's an adjustment that will do what you want.
 
Edit: Typo
SWEEEET!
Ok, I'm going to give you a 30 minute task. Look at your pegboard. Think about which tools you reach for most often. Take all the tools down and rearrange based on how order of priority. No way Mr. Hacksaw needs to be front and center.
Also, that's a LOT of your pegboard used for wrenches. They look good so maybe they stay for aesthetics. But it's worth the question: how often do you use a wrench at a bench? Not often. Usually you're working on that Harley or the car. Wrenches may go better in a rolling drawer. Bench work is just different tools. You'll spend countless hours at that bench making blades in 2017, and never reach for a wrench once.
Also, THIS will change your life. A tall task chair is the best thing in my garage. I can go all day in that bad boy, and it's tall enough to sit at my workbench.
Boy I love your setup. Music. Drinks. Lighting. And it's clean. I want to hang out here.
Nice! I need this in my life... my shop isn't much more than a glorified walk in closet, so this would definitely save serious space.
Previously, I was considering buying this, but I like your project better.
I've used the little plastic organizers (like for tackle) with small plastic bags for a portable solution, but would definitely prefer a small drawer set (with the bags) for a more permanent solution.
Note: links are only for examples, not recommendations of products.
I also throw part of the hardware packaging in with the bags for labeling and always have a marker near the boxes for custom labeling if needed.
I'd add the Landis workbench book, and workshop book. A bit out of date, but great if your library has them. They have one or two luthier benches/shops.
I knew this bench would be sort of "baby". That is, I knew it would be just a benchtop (so common holdfasts are out), it would be cheaply and quickly made, and someday when my shop is not in my kitchen I would build a "real" bench.
I wanted some kind of hold-down clamps, but lacking the space below the deck, they'd have to attach somehow to the deck itself. At the time I was enamored with aluminum extrusion, especially its use in a knockdown turntable stand I was building.
As for the brand, I think I simply stumbled upon it through Amazon.
When I'm ready to invest in and build a bigger, heavier, less-flat-packable bench I want it to have Jorgensen vises & dogs: Jorgensen 41012 vise, Jorgensen 40709 vise, Jorgensen bench dog
I did search generic hook kits like this or this, but I would have to order internationally. That stuff is pretty much unknown here.
Gotcha - I just meant [these guys](Kreg PRS3040 Precision Router Table Insert Plate Levelers https://www.amazon.com/dp/B000VRML54/). You can use any plate and just cut out part of the tabletop vs getting a full setup. Works amazingly well with bearing bits like round overs or radii.
> It won't be especially hard to build 4 legs instead of two instead of the ledger, maybe something like this
Love Woodgears, hate his bench as it applies to woodworking. His workbench is "a table where machines live," not a workbench. Where do you clamp stuff to it?
Highly recommend this book: http://www.amazon.com/Workbenches-Design-Construction-Popular-Woodworking/dp/1558708405/ref=sr_1_1?s=books&ie=UTF8&qid=1382939311&sr=1-1&keywords=schwarz+workbench
I guess I used the wrong terminology, I got this [dampener/stiffener](
https://www.amazon.com/Forrest-STIF05-5-Inch-Dampener-Stiffener/dp/B0000223VT/ref=mp_s_a_1_3?keywords=table+saw+stabilizer&qid=1572310168&sr=8-3). For the fence I bought the plans from John Heisz and built my own, it's been awesome:
https://youtu.be/B0IHnxhSZsg
Would you mind posting a few pictures of how you did the legs? I have my top section, but stalled out. I also have a couple gramercy holdfasts, this https://www.amazon.com/gp/product/B00012XCCA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and this https://www.woodcraft.com/products/woodriver-large-front-vise?gclid=CjwKCAjw2cTmBRAVEiwA8YMgzUrHg_vrJ8InPWmbNdVrg9n7lkZsTZ260sqDdXlSAcRanx2tvES_2hoCRg8QAvD_BwE but no good plan on how I'm going to configure them.
This is the one I use https://smile.amazon.com/Freud-Double-Flute-Straight-12-194/dp/B00004T7CZ/ref=sr_1_1?ie=UTF8&qid=1542225656&sr=8-1&keywords=freud+straight+router+bit+1+3%2F4
My local maker space has roll up keyboards in the woodshop and metalshop and I've never seen them replaced. http://www.amazon.com/Adesso-Flexible-Full-Sized-Keyboard-AKB-230/dp/B000BHB5YW
Gladiator GarageWorks GAWU12CCTG Clean-Up Caddy https://www.amazon.com/dp/B0015IWYPK/ref=cm_sw_r_cp_apa_xuMSAb3HXJ519
I got this one: WiFi USB Microscope, https://www.amazon.com/dp/B07QX3Z78Q?ref=ppx_pop_mob_ap_share
It is a bit rough around the edges, but works.