(Part 2) Top products from r/WranglerYJ

Here it is: http://www.morris4x4center.com/complete-soft-top-with-soft-upper-doors-gray-denim-rampage-68111.html (and on Amazon: https://www.amazon.com/gp/product/B000X5HGEK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)

My door legs were slightly bent on passenger side (they claimed shipping error) and the driver side window clips the windshield channel (I think this is a broken part on my side) but otherwise the top fits pretty great! I love the color so much!

It does come with all of the hardware you need. I got new rails, the actual hardware, windshield door channels, and windshield top channels (but my top channel was ripping out so we've drilled through my windshield frame, so I didn't need those).

Could've used some new bolts for the rails though. No big deal.

The soft uppers are great though, they're velcro style so they can actually come off of the hardware...plus you get the hardware! So I now have black upper sliders, black upper zippers, and gray/white upper zippers! :D

Smittybilt 76621 SRC Rear Bumper and Tire Carrier


Sure the latch rattles a bit, but if you have prime you can't beat free shipping and in some states, sales tax break. I love it, works great with a 33" spare. Great time to reinforce the with a frame tie in kit. I know my YJ had a shear in the rear crossmember which I didn't notice until I pulled my old bumper and bumperettes off.

Well, if you are in NC, you come get a pretty good set of Rio Grande seats from me. :)

I swapped in Sahara seats, with these covers, and am pretty happy.

I’m running these with 33” KO2s. If I were going with 35s I would go 16/17” rims. Rule of thumb I’ve heard is about 1/2 the diameter of the tire for the wheel. 16/17 inch would be just fine for airing down. You wouldn’t notice a difference compared to the 15. It also gives you room for better brakes. You’ll want those, esp. with 35s.

As far as back spacing goes, I think you should be fine with 3.75”. I’ve got plenty of room with the 33s. I’m assuming 12.5” wide tire?

I would highly recommend ditching the track bars front and rear. Helps immensely with flex and ride quality. Steering will probably suffer though. I also am not running a sway bar anymore. I took it off and couldn’t tell a difference driving. My recommendation would be take stuff off one by one and see if you notice/like it. Taking them off with only help when wheeling it.

Rockauto shows the 4cyl being Dorman # 594137, no listing for the '87 6 cyl. The Dorman site shows that part# only being good for the '83-93 4cyl, so it looks like they're different parts. It looks like RockAuto has the one you need for $66 though.

https://www.rockauto.com/en/catalog/jeep,1987,wrangler,2.5l+150cid+l4,1184655,engine,harmonic+balancer,5512

Amazon has one left, prime shipping, $75. One review from a guy that says it didn't work on his '86 CJ7 2.5

https://www.amazon.com/Dorman-594-137-Harmonic-Balancer/dp/B000CGIQW6/ref=sr_1_1?keywords=dorman+594137&qid=1567807150&s=gateway&sr=8-1

O'Reillys also lists the right part as being a Dorman 594-137, $75

https://www.oreillyauto.com/shop/b/engine-parts---mounts-16774/harmonic-balancer-12131/62c82173a71f/1987/jeep/wrangler?q=harmonic+balancer

Crown shows the same part for the 2.5 and 4.2
https://www.crownautomotive.net/Crankshaft-Damper/J3242886.html

and Amazon has that one for $57+$14 shipping.

https://www.amazon.com/Crown-Automotive-J3242886-Crankshaft-Damper/dp/B009X1QS8K/ref=sr_1_1?keywords=J3242886&qid=1567807218&s=gateway&sr=8-1

Doesn't look like it should be impossible to find. I'd probably order it from O'Reillys so I could take my old one in and compare.

I bought these and they've worked really well. Just put some high quality H4 bulbs in there. So much better than the stock sealed bulbs.

I replaced the Oil Pressure Switch in my 95 a year ago with this one: https://www.amazon.com/Original-Engine-Management-8113-Pressure/dp/B000E683OK

It was pretty easy to do, just took some elbow grease.

Check out metras site. I tracked one down for a 94 this way. Then search for the part number on Amazon, it was only like 6 bucks or something!

EDIT: found it, https://www.amazon.com/Metra-70-1002-Harness-1988-96-Speaker/dp/B0002BG66Y

Uniden PRO520XL is pretty damn affordable, compact, and gets the job done well. I mounted mine below the radio.

i swapped out my oem steering wheel on my 93YJ sport, many years ago
we used a gear puller, looks like this

You’re looking for seat sliders. I bought these ones a few months ago and they work for me.

https://www.amazon.com/Rugged-Ridge-13201-03-Replacement-Slider/dp/B000FPYCOK

Just adding one more option. I use these and they do bounce a bit but they work and they mount using the door hinge.

http://www.amazon.com/Olympic-Products-117-124-Texture-Safari/dp/B001JDE6ZW

These are the ones I tried that made mine sputter: Bosch 4428 Platinum https://www.amazon.com/gp/product/B000BYD78W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

This is the one I used. https://www.amazon.com/Continental-Elite-4060710-Poly-V-Serpentine/dp/B000C30J06 No ac, power steering.

Get an aux cord to cassette tape adapter, no need to do any soldering.

https://www.amazon.com/s?k=aux+to+cassette+adapter&sprefix=aux+to+cass

Edit: found a Bluetooth version https://www.amazon.com/dp/B07QSW6KNY/

Funny enough, my oil pressure sender just went wonky the other day too. Anytime the Jeep is running it just pegs to max PSI regardless of rpm. I have a new sender on its way BUT I HIGHLY RECOMMEND that you get an oil sender socket as it can be a pain in the ass to replace without one! I ordered this one

It’s made by blue sea systems. And they make a ton of different sizes.

Blue Sea Systems 5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover https://www.amazon.com/dp/B000THQ0CQ/ref=cm_sw_r_cp_api_i_PR2QCbPH5WP6S