(Part 3) Top products from r/ak47

I used this guide and a got a trust from them if you don’t have one. You can file as an “Individual.”

I got my fingerprints done myself.

• Get Finger Print Cards here for free. 10 is good to start.
  
  
• Got ink here.
  
  So once Hinterland shipped my rifle, i asked for the Serial Number. Then started the E-Form. Once it gets approved, I’ll take my rifle to the gunsmith to drill out the gas restrictor and cut and crown the barrel. If you have the tools you can do it yourself.
  
  You’re gonna need to get your firearm engraved too.
  
  The whole process sounds like a lot but it’s super simple. Approval time is about a month. I did my first stamps in March and it got approved in the same month. Head over to r/NFA for more info if needed.

> neither extreme or violent in a method to accelerate the projectile rapidly.


......Thats why guns never explode because smokeless gently pushes the rounds down the barrel with with light and gentle pressure. Oh I get it now./s

You are arguing semantics with someone who doesn't give a fuck. Try to change your walls mind and you might have better luck. And hey dumb ass what do hemorrhoids feel like? oh that's right they feel like butthurt. Since I was never a dick to you till after you called me one, you must have hemorrhoids, because you were pretty butt hurt over a mild joke, that was more in agreement with you while making fun of I.O., RAs,C39 owners, yet you took it personally. Most likely because you were already in butthurt due to the hemorrhoids, Hence why I recommended it for you. Why you think my pussy has a yeast infection Idk, it's not like you can see me sitting here scratching at this itchy thing, But I promise it's not from you, you are no where near sweet enough.

And now the downvotes are hurting your feefees? Don't worry I'll have a talk with them.

Guy stop downvoting him. He obviously can't handle the downvotes and needs a safepace where he can hide from all the libtard cucks who aren't even here yet he felt the need to bring that up.

Also might want to double check those numbers, Unless these are 300g containers. But surely you know what you're talking about and didn't throw up a random thing you read once.

Not quite, it's much brighter green from a translucent green polycarbonate. This topic on AKFiles describes it a bit and shows the actual Russian green.

The "rightness" or "wrongness" of it never crossed my mind honestly. I thought it looked neat, the wife loved the color, and that settled it.

thanks! i love the darker wood

http://www.amazon.com/gp/product/B000LNW7ZM/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B001CEMYLG/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1

i used both of those for my finish.

I use testors model paint. I fill in what I want to color, squeegee away the excess, wait about 20-30 minutes then lightly wipe away the remaining excess with a rag that has some Hoppes on it. An additional thing that’s helpful are
these q tips. They let you get some very detailed work/cleaning in (like the center of the 6 or the A) because they don’t fall apart and shed like normal q tips. All this is stuff you can get at hobby lobby or michaels for like $15 or so.

Why not just spray coat the parts with some type of clear coating to keep the look of everything? Would something like this work to keep the 'look' including the sticker in place as well as the shellac chips as they are? I'm not too knowledgeable on the paint finishing side of life.

http://www.amazon.com/Krylon-6-Ounce-Crystal-Acrylic-Coating/dp/B001K65K26

It's not really. It takes about 5 minutes with a dremel, using a thin grinding stone tip. Just grind a bit, then test-fit the standard mag for fitment. You can get it to the point where it will still accept the Vepr magazine in addition to the standard/surplus magazines.

Here's a brief video detailing the process.

Arguably the bullet guide installation is more difficult, since you have to be very careful while drilling and tapping. If you botch the magazine catch, you can always install an aftermarket upgrade, but you won't be able to easily repair a botched hole in your receiver.

I would try an EZ out or similar

> HK black duracoat

damn you guys are going to make me go broke with all these projects. This seems like a good idea. I've never seen it posted on the FAQs.

http://www.amazon.com/DuraCoat%C2%AE-Semigloss-Black-Firearm-Finish/dp/B000M67TTC

another project for later this summer it looks like now.

any chance you could find a narrow enough grabber tool and try that?

You can try one of these. Since you're mounting a light, it doesn't need to hold zero, so this is probably a good choice for you. Alternatively you could try adding a rail section to the stock handguards (probably the upper for a light), but that would require some drilling and permanent modification.

Mine came with some blonde wood. I sanded it and stained it black with Japanese ink. Daiso has the ink for $1. There's enough in the bottle to do everyone's AK that you've ever met.

Here it is in Amazon for more money but still a better deal than the more common Yasutomo brand. Daiso's website sucks.

https://www.amazon.com/Sumi-Calligraphy-Liquid-180ml-Bottle/dp/B0039OQ0J4

Aim Sports AK/SKS Bipod, Small, Black https://www.amazon.com/dp/B000R2ZMTA/ref=cm_sw_r_cp_apip_D6XqAmyixeHsL

Here is the link to the kit.

Vietnam was self inflicted.

You should really read Afgantsy

http://www.amazon.com/Plano-10470-Guard-Single-Rifle/dp/B0029KH9FS/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1449870889&sr=1-1&keywords=1010470

Hmm I didn't have nearly as much of an issue as you. I found the center, used a center punch to mark the hole and then drilled with an 1/8th inch bit first for a pilot hole for the larger bits. Then went up in bit size until i got to the final size needed for the adapter.


I used these exact black oxide bits for mine...
https://www.amazon.com/Craftsman-9-66020-Black-Oxide-Drill/dp/B00370OBGE

Standby for link dump:

http://www.tacticaltailor.com/releasablearmorcarrierttrac.aspx
http://www.tacticaltailor.com/556triplemagnamagcombopouch.aspx
http://www.tacticaltailor.com/556doublemagpouch.aspx
http://www.tacticaltailor.com/rollupdumpbag.aspx
http://www.ar500armor.com/ar500-armor-tactical-epik-ifak-multicam.html
http://www.tacticaltailor.com/adminpouchenhanced.aspx (Moved to backpack)
http://www.amazon.com/Tactical-Tailor-Operator-Removable-MultiCam/dp/B00EMG5O04?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01 (Comes with attachment points for the vest and shoulder straps)
http://www.amazon.com/Streamlight-14032-Sidewinder-Flashlight-Articulating/dp/B003GXF9HM?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
http://www.amazon.com/Honeywell-Impact-Amplification-Electronic-R-01526/dp/B001T7QJ9O?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
The magazines are Lancer AWMs in black.

If you're really worried just get this