(Part 2) Top products from r/coolermaster

It's not the best performing cooler in the world but it will do an 8700k no problem as long as u have mounting hardware

What is he charging?

Any of these three below will destroy it in cooling performance:

Great: Scythe Mugen 5 Rev.B 120mm Air CPU Cooler, Tower Heatsink with 6 Heatpipes, Quiet PWM Fan, Intel LGA1151, AMD AM4/Ryzen https://www.amazon.com/dp/B06ZYB8K77/ref=cm_sw_r_cp_apa_i_Ua.ODbV70A7RN


Better: Scythe Fuma 2 120mm Air CPU Cooler, Twin Tower Heatsinks with 6 heatpipes, Dual PWM Fans, Intel LGA1151, AMD AM4/Ryzen https://www.amazon.com/dp/B07RFNG89S/ref=cm_sw_r_cp_apa_i_2.-ODbCTFMDNC


Best: Thermalright Le Grand Macho RT (with fan TY-147B) https://www.amazon.com/dp/B01BCLXO7Q/ref=cm_sw_r_cp_apa_i_ka.ODbYSZHAQF

wow a 10 feet cable?

​

I think you could get something like this: https://www.amazon.com/CableCreation-Extension-Extender-Repeater-Booster/dp/B0179MXKU8/ref=sr_1_2_sspa?crid=2CJY63UNTJEDP&keywords=usb+3.0+extension+cable&qid=1555446452&s=gateway&sprefix=USB+3.0+e%2Caps%2C196&sr=8-2-spons&psc=1

​

will work great

4 pin RGB connector only powers the LEDs,it won't power the fans,for that you'll have to plug in the molex(most probably,the one with only two male pins). Keep in mind you can't control fans with molex,they will run at full speed but they're pretty quiet imo. If you want to control them,you'll have to get a one fan header to three way splitter,cooler master most probably only includes molex to three way splitter.

I suppose I can't pre order from somewhere in the EU if I'm in the United States. Just got my tax return back and this was going to be a gift to myself :P

edit: Is this the keyboard? I do not know why I did not see this on amazon until now. It says ships in 1-2 months... seems sketchy...

Link to Amazon

Ah okay, thank you. I was looking at something like this:

https://www.amazon.com/SUPERNIGHT-Remote-Controller-Wireless-Control/dp/B00AF5YOK2/ref=sr_1_3?ie=UTF8&qid=1525203776&sr=8-3&keywords=rgb+controller

But I'm assuming I have to buy 3 of them since they only have 1 cord.

The H500 is a low resistance case so you do not really need great performing fans. Just buy good looking and quiet ones and you are set to go. Extra high performing fans only makes a minor difference in the H500 cases. The Cooler Master RGB ones are great for this case no problem... They can be made quieter if you buy these silicone fan mounts that replaces the screws: https://www.amazon.com/Noctua-NA-SAV2-Chromax-Anti-Vibration-Mount/dp/B018T3826S/ref=sr_1_3_sspa

https://www.amazon.com/Cooler-Master-Direct-Contact-Unique/dp/B01KBXKP8W/ref=sr_1_1?ie=UTF8&qid=1502468768&sr=8-1&keywords=cooler+master+212+led is the place I purchased. My box clearly states that this cooler is AM4 Compatible straight out of box with no new brackets required.

My Model Number is: RR-212L-16PR-R1
My Ticket is 00107441.
There are numerous other people on newegg that seem to have the same issue, even when they receive the new 212 LED
It looks just like this, with the slit in the middle for the retention handle.
http://assets.coolermaster.com/products/hyper212-led/img/web_hyper_212led_01_01.png

I have not heard back from Coolermaster since 8/4/2017

It will be tough doing it via internet shopping due to you only looking at photos of the item. It's be even tougher finding a decent electronics stores that will have various cables in stock to you can look at the jack to see if it's likely to fit.

May the RNG Fairy smile at you during your search.

Looking at the cable provided though, I think this can fit into the headset jack and then it's just a case of getting a longer male/male 4 pole cable to connect it to the pc.

https://www.amazon.co.uk/FosPower-Extension-Auxiliary-Headphones-Speakers-Gold-x/dp/B01552UGMY

It's for fan/led controllers which have a pci bracket as a base. You probably have to remove the metal and add some additional metal piece to the top of the slot to hold the bracket in place.

Something like this: https://www.amazon.com/NZXT-CB-LED20-BU-Sensitivity-Sleeved-2-Meters/dp/B0046Y5Z5G

http://www.amazon.com/CM-Storm-QuickFire-Ultimate-Mechanical/dp/B00EJ8CHIM/ref=sr_1_2?ie=UTF8&qid=1395245028&sr=8-2&keywords=quickfire+ultimate

Does that fit your needs?

Just letting everyone know, preorders are now available via Amazon for the MM711! Wooooo (Releasing December 18th)

​

Cooler Master MM711 Mouse

You don't have to pay so much for one, this will do fine also.

I can't find it when I search on Amazon, but the link /u/rajface provided still seems to work: http://www.amazon.com/Cooler-Master-Exclusive-Capacitive-SGK-5000-GKCT1-US/dp/B00MY3S288

Any 3.5" to 2.5" bracket works. This one works.

Just adding that this one costs just as much as a single version.

You need to connect the RGB plug (4pin female) Example to the RGB header on a motherboard. Example. Or use a seperate RGB controller.

>MASTERBOX K501L

this is Amazon India though

https://www.amazon.in/Cooler-Master-MasterBox-Pre-installed-Transparent/dp/B00CY8RTHS

https://www.amazon.com/Cooler-Master-MasterKeys-Mechanical-Keyboard/dp/B01D8ETGJ0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1494469241&sr=8-1-fkmr0&keywords=Masterkeys%2BPro%2BM%2BRGB%2BBlue%2BSwitches&th=1

I got mine on amazon.com:

http://www.amazon.com/CM-Storm-Trigger-Mechanical-Keyboard/dp/B007TFOO6K/ref=sr_1_5?ie=UTF8&qid=1369115372&sr=8-5&keywords=cm+storm+trigger