(Part 2) Top products from r/ecigclassifieds

Here is what I wrote out for this other guy,

Check our /r/diy_ejuice[1] great community lots of info and recipes!

Order the nicotine and your STARTER flavorings from https://wizardlabs.us[2]


Order either 60 or 100mg pg based(if you aren't allergic) nicotine for math reasons, they both calculate pretty even. Also the 100mg one will last a lot longer but it kind of depends on what is in stock.


For the flavors it's best to order your beginning ones there too until you know what you like,because they sell like same size ones for $1.99 (prob about enough for 80-140 milliliters depending on your preferred flavor %
once I knew what I wanted I started ordering from high desert vapes
https://highdesertvapes.com/categories/DIY/[3]
(they resell flavorings so you get a GOOD discount)


P. S. On HDV ellas=capellas (you have to order ellas sweet strawberry, my most ordered and one of my faves. I also recommend fruit stripe gum, but I forgot who made it it's a newer one I just picked up!)


Don't forget to order syringes and I accidentally ordered a shit ton of size 14 needles for them and it's really hard to pull up VG since it's so thick so get a bigger one for that. Also make sure before you use them that you put tape over the numbers because they will come off really fast if you don't.


I actually buy all of my PG and VG locally Walmart sells VG (if you are interested let me know and I'll send you a pic of what the bottle looks like) but it's in the skin ointment aisle.


Tractor supply company sells a gallon of PG for $23 best deal ever. I'm never running out! Lol
You'll need bottles as well (way more expensive than you'd think, there are some cheapish options on Amazon for like 50 10ml bottles.

http://www.amazon.com/gp/aw/d/B00D2MPVUM?pc_redir=1395300206&robot_redir=1[4]


if you want reusable bottles hit up


http://www.amazon.com/Amber-Glass-Bottle-Dropper-15ml/dp/B0085W96U0/ref=sr_1_1?ie=UTF8&qid=1396409623&sr=8-1&keywords=15ml+glass+bottle


that is what I use now

Download the program ejuicemeup that's your calculator. Love it.
http://ejuice.breaktru.com[5]


Uhm.... I'm probably forgetting something any questions, just ask.


Edit: holy novel


Edit 2: I remembered something else, try and get familiar with the list of flavors known to crack tanks
http://discountvapers.com/liquids-and-tanks/[6]


Edit 3:links!


REAL EDIT: formatting, I usually use capellas but there are certain flavors that certain people do better. I'd say Capellas = fruit FW = dessert TFA = candy like Lorannes = Fruit candy like

and steeping I am really lazy and don't wait to vape and it still tastes pretty good. I'll make about 15 ml and it will just get better and better as it goes :D

I actually can't compare since I was an early adapter to DIY and I didn't ever ger into ordering juices online. I can tell you everyone I've let try it so far has LOVED it. you may want to tweak it a little for your own preferences like if you want it a little more cinnamon-y or a little sweeter but each person likes things a little different

Amazon is your friend.

http://www.amazon.com/gp/aw/d/B00JVXVKB0/ref=mp_s_a_1_2?qid=1422324544&sr=8-2

100' 28g Kanthal $6 (I use 26g on my subtank, but 28 works too. This is just the first one that showed up)

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1?qid=1422324636

More Japanese cotton than you will know what to do with $8

http://www.amazon.com/gp/aw/d/B00FZPDG1K/ref=mp_s_a_1_1?qid=1422324748

Angle cutters, not needed but it makes getting a clean cut very easy $5

http://www.amazon.com/gp/aw/d/B004800I6Y/ref=mp_s_a_1_18?qid=1422324973

Precision screw driver set, also not needed but handy for both the fact that they are in fact screw drivers and that you can use the slotted ones for wrap coils with a consistent and known inner diameter. $8 (you can get this for a lot less at Walmart, Lowes, harbor freight... Etc)

So a little over $25 shipped and you will not need kanthal or cotton for a very long time.

I use this.

http://www.amazon.com/Tamrac-Mirrorless-Compact-Bag-Blk-Multi/dp/B00AFSXOB4

Inside, I can store my multimeter, 3 rolls of kanthal, 4 30mls, and a ziplock of jpo cotton. In the small front pocket, I keep 4 18650s, 2 pairs od tweezers, small scissors, toenail clippers, a couple drill bits, a screw driver, and small pliers. There are two mesh pockets on the sides were I keep 4 mechs or more juice. I love it!

Here you go dude. These are 180ml bottles like OHW. They have other sizes as well.

https://www.amazon.com/dp/B00B5137DK/ref=cm_sw_r_other_awd_a9Y-wb46Z5B76

I believe these will fit fine

http://www.amazon.com/gp/product/B000FMUFO4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Just so you guys know, this (http://www.amazon.com/gp/product/B004IUEHYS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) does NOT work. Someone suggested it in a thread for me; even the smallest screwdriver is too big.

You're right about the Kidney Puncher kit, but I'm not sure if OP knows. The Kidney Puncher kit comes with those screws as HEX screws, NOT the triangle screws, so it's much easier to find better tools to use on it. The triangle screws are the Mutation X v2's Achilles Heel, and I look forward to finally buying the Kidney Puncher kit.

It’s 7mm (.2760”) ø.

Here’s a cheap pin gage that is the same size as the Wotofo tool:


Vermont Gage Steel Go Plug Gage, Tolerance Class ZZ, 0.276" Gage Diameter https://www.amazon.com/dp/B0006JCCOW/ref=cm_sw_r_cp_api_i_fmUKDb6EKK4KY

I doubt that you're going to get a better price than this on here


http://www.amazon.com/gp/aw/d/B00FBSVQX6/ref=mp_s_a_1_1?qid=1398059494&sr=8-1&pi=SX200_QL40


They also have other gauges of wire on there too

dis one http://www.amazon.com/gp/product/B000HT8U9M/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Just out of curiosity, why wouldn't one of these work?

http://www.amazon.com/Crasher-Portable-Bluetooth-Speaker-Battery/dp/B00A44RLWC

http://www.amazon.com/gp/aw/d/B00B1UI4MY?pc_redir=1412016494&robot_redir=1

http://www.amazon.com/gp/aw/d/B00BGO0Q9O?pc_redir=1405247406&robot_redir=1

About a hundred bones.

Check this out: Brother PC Connectable Label Maker (PT-P700) Brother https://www.amazon.com/dp/B00DSYEB28/ref=cm_sw_r_sms_awdb_dXPGybEWRNVMP

No. Eciggity has shipped already. Their preorders were $150, retail $170. My slot cost me $126 but I'd consider giving it up for the $150. Word is next round ships on the 8th. Ours may have already shipped.

http://www.reddit.com/r/ECRGroupBuy/comments/2fpugp/ipv_v3_group_buy_update/

Theres no way I have the cash difference but I will within a month. Too much vape crap to buy and buying but I need a laptop. I can't make any decisions till the 17th when I find out if I'm going to jail or not. I should get a stay to get my affairs in order so I can say then.

Also consider @ $120 (incl s/h) trade value: http://www.amazon.com/CyberPower-CP1000PFCLCD-Sinewave-Compatible-Mini-Tower/dp/B00429N192

Basically it will support battery backup on an Active PFC system. Typically these things are expensive as hell but this model has been reliable for a few years without more than a yearly maintance cycle in its expendature and a couple power outages that I used it to charge my cell from. It'll power a rated (600w) decent gaming rig for about 5m. I have a ~50w custom build +26w LCD and a router that it holds for just over an hour browsing during an outage

I also have a 21.5" asus 1080p 2ms I'll take $80 in trade value (paid $120). It's cheap because it's not an IPS and doesn't wall mount. Beautiful piece otherwise, well cared for no dead pixels (haven't used in a minute, will confirm before shipping). Narrow bordering (<1in). Touch countrols (no buttons), HDMI/VGA.