(Part 2) Top products from r/popperpigs

DANGEROUS POPPER RECIPE!!!!!!!!!!!!!BEWARE!!!!!!THIS IS THE BOMB!!!!!!!!!

Cute title for this post huh?

Best thing about it? My hands are not shaking as much and I just put the poppers down. God, I adore these Isobutyl pops!

OK, let's get serious. As promised here's Popp-peeeeeeeeeeee Pig! Sorry, I digress and am still a lot spacey.

I will need to tweak this recipe because it is so very potent. You confirmed addicts will fall in love with this. It does have an acidic start to the huff. I should add more acid, me thinks. Will try for the next batch. I will tweak and report but not soon. This batch will last at least 4 days if tonight is any indication.

So let's start: If you do not know JimOakey's set up please go find it and do as it says. I re-posted it here: https://www.reddit.com/r/popperpigs/comments/3k1i6j/adventures_in_popper_production/
Those who do; I will give enough details so you will not need to review the posts.

1. You will place 1 tablespoon of nitrite in a small, clean mason jar.
   http://www.amazon.com/gp/product/B00L74HO5M?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
   
   
2. Add 2 ounces of distilled water.
   
   
3. Add 2 ounces of Isobutyl alcohol. http://www.amazon.com/gp/product/B009S08MB2?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
   
   
4. Mix for 10 minutes. Usually for isoproply I mix until the liquid is clear, usually takes about 30 seconds for isoproply, but I got frustrated waiting so allowed 10 minutes then said, 4 get it. Take it as it is.
   JimOakey uses a portable drill press for mixing. He puts a hand drill in it and places the "J" corner cut from a plastic hanger inserted into the drill as a mixing tool. Take a plastic hanger, turn it upright. See the top and bottom corners look like a J ? Just cut out that J and force it into a hand drill bit slot. So that the little up turn of the J is at the bottom and is the portion that does the mixing - is in the blend. http://www.amazon.com/Wolfcraft-4525404-Attachment-4-Inch-8-Inch/dp/B000JCIMEA/ref=sr_1_1?ie=UTF8&qid=1452057063&sr=8-1&keywords=portable+drill+press
   
   Step 5) After 10 minutes allow the mixing to continue. Add 1 ounce of battery acid. Add slowly. I added it slowly over a 4 minute duration. http://shop.advanceautoparts.com/p/autocraft-battery-acid-cycle-acid/2030000-P?searchTerm=battery+acid
   
   
   
5. Continue mixing while you wash out your acid pour cup.
   
   
6. Turn off the drill and remove the blend. Allow the popper to rise to the top - about 2 minutes. Drew off the popper with an eye dropper. Put in a plastic container like this:https://images.search.yahoo.com/images/view;_ylt=AwrB8qAYo4xW_WUAdiMunIlQ;_ylu=X3oDMTIzdWtmaWIxBHNlYwNzcgRzbGsDaW1nBG9pZAMzMTBmNWZjMzU4NDAwY2Q1ZGM4NWE1YjRjMzQ2YzE0NgRncG9zAzIwBGl0A2Jpbmc-?.origin=&back=https%3A%2F%2Fimages.search.yahoo.com%2Fyhs%2Fsearch%3Fp%3Dplastic%2Bbottles%26fr%3Dyhs-mozilla-001%26fr2%3Dpiv-web%26hsimp%3Dyhs-001%26hspart%3Dmozilla%26tab%3Dorganic%26ri%3D20&w=500&h=500&imgurl=cdnll.freundcontainer.com%2Fimages%2F500%2F3390B01NAT-Condiment-Bottles.jpg&rurl=http%3A%2F%2Fwww.freundcontainer.com%2Fplastic-condiment-bottles-ldpe%2Fp%2Fv3390B01NAT%2F&size=11.9KB&name=%3Cb%3EPlastic%3C%2Fb%3E+Condiment+%3Cb%3EBottles%3C%2Fb%3E+-+LDPE&p=plastic+bottles&oid=310f5fc358400cd5dc85a5b4c346c146&fr2=piv-web&fr=yhs-mozilla-001&tt=%3Cb%3EPlastic%3C%2Fb%3E+Condiment+%3Cb%3EBottles%3C%2Fb%3E+-+LDPE&b=0&ni=21&no=20&ts=&tab=organic&sigr=12cmkin1v&sigb=14a3rnv76&sigi=125l9qmk1&sigt=11eiodf26&sign=11eiodf26&.crumb=pIsY04NLJw4&fr=yhs-mozilla-001&fr2=piv-web&hsimp=yhs-001&hspart=mozilla
   
   
   I paint my container black and keep in a room temp, dark corner of my office.
   
   
   I drew 23 ml from this batch, but tossed the rest - about 1 ml.
   
   
7. Wash out your mason jar and eye dropper.
   
   
8. Allow about 6 hours to cure.
   
   
9. Get fucked up.

I posted a response to a similar question before. I thought this would be a good contribution to this topic so here it is : So I'm into the whole latex + cross dressing + heavy rubber angle. This is what I'm going for, but the link is not me. The most elaborate setup has been pretty complicated and by most measures, pretty extreme. I only did this whole set up twice because it's so much effort involved. It's an amazing feeling and really satisfies all my kinks.

• Locked into a chastity device.
  
• Saline infusion/ injection into my scrotum, to make it huge (again, not me, but this is the idea).
  
• full enclosure latex - Female latex catsuit with inbuilt silicone boob (forms), latex corset, stripper heels, collar, ankle, wrist cuffs, latex hood
  
• Gas mask hooked to a re-breathing + poppers rig.
  
• fucking machine with Bam realistic dildo
  
  So essentially i dress up as a female rubber doll, nullify my cock with chastity and a saline injection, and then let the machine go at me while I'm breathing poppers through a gas mask.

Use a squeeze bottle. It's airtight and you get a lot more wallop from each sniff because of the extra volume allowing atomizing. Some people recommend you use a cotton ball or paper towel as a wick. I tried this and found it wasn't useful, because you can't pour it back in the original bottle for storage. The tapered nozzle makes this a breeze. I've read that it is exposure to oxygen that is the accelerator of the degradation. I have had great success with purchasing the 30ml bottles and keeping them rather potent until they are used up. I just pour them in the squeeze bottle to use, then return to the original bottle to store. You can buy them at Walmart or Michaels for a couple of bucks. Here's the amazon link.https://www.amazon.com/Wilton-Mini-Squeeze-Bottles-6-Oz/dp/B0000VMBF6/ref=sr_1_4?ie=UTF8&qid=1492628236&sr=8-4&keywords=squeeze+bottle

This looks pretty ideal?

https://www.amazon.co.uk/Sozali-Shaker-Bottle-600-millilitre/dp/B007IRXQ1S

This is basically what I used for the air valve: https://www.amazon.com/Dixon-D04-Brass-Fitting-External/dp/B00835W23M/ref=mp_s_a_1_60?ie=UTF8&qid=1550117363&sr=8-60&pi=AC_SX236_SY340_QL65&keywords=brass+air+valve+threaded&dpPl=1&dpID=51k7LZz4hgL&ref=plSrch

The top is just a brass male barb that happened to fit a piece of silicone hose I had laying around.

It works very well; I use

https://www.amazon.com/FoodSaver-FSFRSH0051-FreshSaver-Handheld-Sealing/dp/B002FWIVCA/ref=sr_1_3?ie=UTF8&qid=1509830584&sr=8-3&keywords=foodsaver+freshsaver

and

https://www.amazon.com/FoodSaver-T03-0023-01-Wide-Mouth-Jar-Sealer/dp/B00005TN7H/ref=sr_1_4?s=home-garden&ie=UTF8&qid=1509830683&sr=1-4&keywords=foodsaver+wide+mouth+canning+jar+sealers&dpID=51b0i952XTL&preST=_SY300_QL70_&dpSrc=srch

and

https://www.amazon.com/FoodSaver-FAX12-000-Accessory-Hose-Clear/dp/B00T699C14/ref=pd_sim_79_4?_encoding=UTF8&pd_rd_i=B00T699C14&pd_rd_r=G1EK7WAZPVPAM4CBX621&pd_rd_w=LlqaD&pd_rd_wg=GDCFk&psc=1&refRID=G1EK7WAZPVPAM4CBX621