Top products from r/projectbike
We found 4 product mentions on r/projectbike. We ranked the 4 resulting products by number of redditors who mentioned them. Here are the top 20.
1. TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece
Sentiment score: 0
Number of reviews: 1
Instant impact force loosens rusted or frozen screws without damaging themForward and reverse drive directionDrives included screwdriver bits or any 3/8 in. drive impact socketComfortable handle with non-slip knurled gripFrees corroded brake caliper screws and other vehicle or outdoor fasteners expo...
2. Hozan JIS-5 JIS Screwdriver Set (NEW 3rd Gen.)
Sentiment score: 1
Number of reviews: 1
3. USC SprayMax 2K Glamour High Gloss Aerosol Clear
Sentiment score: 1
Number of reviews: 1
Spraymax 2k Glamour High Gloss Aerosol Clear Part # 3680061Lasting high glossVery good polish abilityMaximum resistance to abrasion and scratchingManufacture date on can
4. ARES 70006-3/8-Inch Drive Manual Reversible Impact Driver - Flathead 5/16-Inch, 3/8-Inch, and Phillips 2, 3 Bits Cover Most Common Applications - Disengage Rusted Fasteners or Frozen Bolts
Sentiment score: 1
Number of reviews: 1
SET INCLUDES: This set includes one 3/8-inch impact driver, one 3/8-inch drive bit chuck, two Flat Bits (5/16- and 3/8-inch), two Phillips (#2 and #3), and one storage case. The impact driver has corrosion-resistant chrome plated finish with non-slip knurled grip, and the bits have precision-milled ...
As previously mentioned, spray cans will do just fine for the primer and color. However do not use a regular clear coat for a gas tank, no matter how fuel resistant they say they are, they will still be damaged by gas. You need to get a 2K clear coat, it is a two part paint that will cure and harden and is what is stock on your bikes tank generally. You can buy them in spray cans that have a special valve on the bottom to allow you to mix the two parts.
USC SprayMax 2K Glamour High Gloss Aerosol Clear https://smile.amazon.com/dp/B0082LJMC6/ref=cm_sw_r_cp_apa_i_m7qwCbSMY78J1
That is what I used to do my bike last winter, still looks great and is a super hard and scratch resistant finish. The stuff is pretty toxic, you will want to buy a suitable respirator, not just a face mask. You can primer and paint your tank as normal, wait a week or more for all of the solvents in the paint to evaporate (don't rush this, just wait, even if you think it is dry, wait even longer if it is cold out). Once that is done follow the directions on the gloss spray paint. https://imgur.com/Ovmz5mG.jpg
The reason you are stripping the fasteners is because they aren't phillips heads. Those are JIS (Japanese industrial standard) screws. Close, but different. You need to get the right screwdrivers or you'll keep stripping stuff.
https://www.amazon.ca/Hozan-JIS-5-JIS-Screwdriver-Gen/dp/B003F63WI8/ref=sr_1_1?ie=UTF8&qid=1540514733&sr=8-1&keywords=jis+screwdriver&dpID=31QR2ZwViLL&preST=_SX300_QL70_&dpSrc=srch
Probably also a good idea to hit all those fasteners with PB blaster or something like that and let it penetrate for a while. It looks like you are having fun though.
Here, check out this video for the chisel and other methods: https://www.youtube.com/watch?v=R5d0Bgvjmlk
I second what /u/DC_Farmboy said about the impact driver. It probably wont help you for the bolt that is already stripped but it is a valuable tool when working on these older machines. Also, i would just hit that bike with a power washer or a hose and some degreaser. You are going to be taking it all apart anyway, a little more water wont harm it.
Edit: Just read what you said about the power wash. If you stick a shop towel in the carb intake and use a fan tip on the power washer i doubt you would disconnect or break the wires
TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_apa_i_rp.ZDb3MSFFNV