Top products from r/pwnagotchi
We found 8 product mentions on r/pwnagotchi. We ranked the 6 resulting products by number of redditors who mentioned them. Here are the top 20.
1. Anker PowerCore 10000 Portable Charger, One of The Smallest and Lightest 10000mAh Power Bank, Ultra-Compact Battery Pack, High-Speed Charging Technology Phone Charger for iPhone, Samsung and More.
Sentiment score: 1
Number of reviews: 1
The Anker Advantage: Join the 50 million+ powered by our leading technology.Remarkably Compact: One of the smallest and lightest 10,000mAh portable chargers. Provides almost three-and-a-half iPhone 8 charges or two-and-a-half Galaxy S8 charges.High-Speed Charging: Anker’s exclusive PowerIQ and Vol...
2. SunFounder RTC DS1302 Real Time Clock Module for Arduino and Raspberry Pi
Sentiment score: 1
Number of reviews: 1
An NTC thermistor sensor is included, supporting high sensitivity.A comparator LM393 is contained, so it can output both digital and analog signals at the same time.Include a potentiometer to adjust the threshold of detection.Working voltage: 3.3V-5V; PCB size: 2.3 x 2.3 cmHigh measurement accuracy ...
3. DS3231 Real Time Clock Module 3.3V/5V with Battery for Raspberry Pi and Arduino by Atomic Market
Sentiment score: 1
Number of reviews: 1
DS3231 RTC IC, Compatible with the Raspberry Pi and ArduinoVoltage Range 3.3~5.5VCompatible with Raspberry Pi and ArduinoAccuracy ±2ppm from 0°C to +40°CHigh Quality Atomic Market Brand Product
4. 2.13inch E-Ink Display HAT 250x122 Resolution E-Paper Screen LCD Module SPI Interface Raspberry Pi 2B 3B 3B+ 4B Zero Zero W/Jetson Nano/STM32 Supports Partial Refresh
Sentiment score: 1
Number of reviews: 1
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoNo backlight, keeps displaying last content for a long time even when power down;Ultra low power consumption, basically power is only required for refreshingPreserved solder pads for SPI interface, for...
5. iUniker USB Dongle Expansion Breakout Module Kit for Raspberry Pi Zero/W, Both Front & Back Side Can Be Inserted
Sentiment score: 1
Number of reviews: 1
- Both front and back side can be inserted- Stable and fast- As we know that Raspberry Pi Zero is very tiny, and it does not have standard USB port to connect your standard USB devices, so it may hard to access like other Raspberry Pi version.- Most of you are likely to access Linux OS via SSH servi...
6. REES52 2.13 inch E-Ink Display e-Paper HAT Resolution 250x122 SPI Interface for Raspberry Pi 3 2 Zero W
Sentiment score: -1
Number of reviews: 1
Part Number: 2.13inch e-Paper HAT250x122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interfaceCompatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+Onboard voltage translator, compatible with 3.3V/5V MCUsContact for more development resources and manual (examples for Raspberry Pi/Jetson Na...
> 4) is there a telegram chat for users? If not, should I set one up? I'd love to be able to chat about the gamey end of things in tg.
They're using Slack to communicate with the community. Some folks wanted Discord, others prefer Telegram, but Slack is far and away the most professional, IMO. It's great to have so many excellent options for support, but does come with its own complications.
Sorry I'm not a ton of help with your other questions... I'm pretty new to this experience and I'm fumbling around without an e-ink display. Once upon a time I added this RTC to my RPi3B+ for a Pi-hole, Unbound & Wireguard build, but the downside is that there's the additional requirement of a battery to keep the clock accurate. Perhaps something similar to this would be a better fit for you, but I'm just taking wild guesses at this point: https://www.amazon.com/dp/B01IP5MP72/
I've also struggled to get Bluetooth working from my Android device. Good luck, keep at it.
So basically, what /u/BlorpyRobot said about this being in alpha. The below components are what I ordered, and they worked. However, there may be better parts (I believe that screen is the "v1" model), things may change in the future, etc. Some of them may work better or worse than others (any power pack that will power a pi zero should work, there's several eink screens to pick from, etc.). Some of it is just preference, do you want a large power pack that lasts a long time, or something smaller and more portable?
https://www.amazon.com/gp/product/B06XFZC3BX
https://www.amazon.com/gp/product/B07DH5815J
https://www.amazon.com/gp/product/B0194WDVHI
If you don't mind all the maybes and have no problem hacking together an alpha project though, go for it. If I could pick my parts, I would probably get the v2 version of the WaveShare e-Ink screen. However, I don't know how to ensure I get the correct version (even directly from WaveShare) or if this is really the best (it is, I believe, the original screen that was used though).
just ordered this one - https://www.amazon.com/gp/product/B07NKNBZYG/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
​
Thanks a ton, did you have any issues fixing the screen and everything to it nicely?
I bought an E-paper display made by Waveshare off Amazon a couple of days back, but I have no idea whether it's V1 or V2. Is there any way to figure it out before I start setting up my pwnagotchi?
https://imgur.com/a/ZKYNyHf
https://www.amazon.in/gp/product/B07ZGQWKQR