Reddit reviews 1/4"-20 T-Nuts | 100pc | by Bolt Dropper, Pronged Tee Nut. for Wood, Rock Climbing Holds, Cabinetry
We found 2 Reddit comments about 1/4"-20 T-Nuts | 100pc | by Bolt Dropper, Pronged Tee Nut. for Wood, Rock Climbing Holds, Cabinetry. Here are the top ones, ranked by their Reddit score.
HIGH QUALITY STEEL: These T Nuts are Zinc coated Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other nuts on the market today.T NUTS YOU CAN DEPEND ON: Our T nuts are very strong and are great for both indoor and outdoor use. This zinc coated steel is superior to regular steel and provides excellent rust resistance.GREAT TO KEEP AROUND: Bolt Dropper T nuts are great to have around for use in wood and wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects.DIMENSIONS: Inside Diameter: 1/4” | Outside Diameter: 3/4" | Threads Per Inch: 20 | Barrel Length: 5/16” | Thread Type: Coarse (standard) | Quantity: 100 pcs | Material: Zinc Coated SteelLIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.
Wood beads are easy to find. As for the missing cap, I'd replace all 4 with something new that still fits the motif. Trying to make 1 to match the other 3 will be more expensive.
Cut a larger wooden ball in half. Find a Tee Nut to match the threading on the rods, drill a hole to accept the Tee Nut, apply some epoxy to the inside of the hole, gently hammer on the Tee Nut, allow it to dry, then thread it on.
The easiest thing you could do is lean the headboard against the wall, then push the bed up to it. I've lived with that solution a few times.
For extra credit, stick some felt pads on the top corners of the headboard so it doesn't bang against the wall or abrade the plaster. (That also helps if the headboard is solidly attached to the bed.)
If you do want to bolt them together, I suggest you assemble the two pieces, set them together, than use the holes in the headboard as a guide to drill matching holes in the bed frame. I'd use machine screws with nuts and fender washers -- those distribute the load well so the screws won't pull out. In the US, use 1/4-20 screws; in the metric world, use M6.
If there's not enough clearance for the drawers inside the bed, you can use T-nuts like these instead of hex nuts. And use shorter screws.