Reddit reviews 120 Pcs M3 Nylon Hex Spacers Screw Nut Stand-off Plastic Accessories Assortment White

I got the nylon mounts from Amazon

That kit might be a little bit of overkill, but I figured I'd use the parts. Sadly, I used 8/10 of the 6mm spacers, 4 screws, and 4 nuts. Maybe I'll use the rest on a different build eventually.

I have some build pictures here. You can see what they look like (Picture 8 is a great one).

Yep, that's the one (it's partially put together on my kitchen table right now). I'll tell what I bought and let you decide what to get (I overbought since I have nothing to start with). Keep in mind that I am completely new to the RC hobby and this is my first quadcopter build.

laptop screws for the motors

nylon spacer kit

Nylock nuts for the props

Velcro straps

XT60 connectors to make power lead

Wire to make power lead

zip ties

heat shrink

Like I said I overbought but I think this will work for me (for example my batteries have an XT60 connection).

Some other stuff I got because I'm a newb and want my quadcopter to light up the sky:

Helping Hands Magnifier -> this works very well

Learn to solder kit -> it helped me

Pretty lights

You're going to need this power cord for the imax b6 charger, for whatever reason they don't sell the power cord with the charger. http://amzn.com/B009VDPNXQ

You should also get this battery for your transmitter http://amzn.com/B00JERJZSS

Definitely invest in a voltage checker, this thing is invaluable in the field, if you discharge your batteries beyond a certain point they go bad, I've had two die on me so far because I let the voltage get too low. http://amzn.com/B00EXPPF80

You need some kind of power distribution board, to distribute power from your battery to the rest of the craft, something like this http://amzn.com/B00GQOZZUY

You will need these servo wires to connect your receiver to the kk2 http://amzn.com/B00P6JJFIS

These nylon standoffs will be really handy when you mount your flight controller and PDB (power distribution board) to the frame http://amzn.com/B00LGB2N1Q

Random stuff from the hardware store: Liquid tape, electric tape, big zip ties, little zip ties, velcro

That's probably not everything but you will be flying a lot sooner with all of this stuff

Get some nylon standoffs like these - whatever size you want, but you need the ones that are male on one side, female on the other. Most quad stores sell these as well, I know Hobbyking sells them in bags of 10 for a buck or two.

The male ends of the screws are just wide enough that they'll jam into the little tracks you see in the FC well of the frame coming in towards the center diagonally from each corner. A little bit of glue will keep them there. Mount your FC on those.

If you use some medium sized standoffs, you can make use of the space under your flight controller to tuck away your wiring.