Reddit reviews Aeotec by Aeon Labs ZW095 ZW095-A Home Energy Meter Gen5 Small White
We found 13 Reddit comments about Aeotec by Aeon Labs ZW095 ZW095-A Home Energy Meter Gen5 Small White. Here are the top ones, ranked by their Reddit score.
Keep track of real-time electricity usage with 99% accuracy that reflects how much energy is costing you with this wireless Z-Wave Plus monitor (max 492 feet wireless range).Each box comes with 1 monitor and 2 clamps to detect two separate loads, each clamp meters up to 200 amps under 120 voltages.The monitor connects to mains power of the 2 phases system in the electricity box, as such a professional electrician may required for installation.Compatible with certified Z-Wave gateways including: SmartThings, Indigo 7, Home Seer, Vera, Open Z-Wave, Open HUB, Zipabox, Qolsys IQ Panel, Home Assistant and more.Z-Wave Plus certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Certification number: ZC10-15040002.
Those are the smart sensors, They control the 3 exhaust fans per temp readings. They also act as motion sensors and turn the lights on in the room when I walk in. The white boxes on the right wall are 240v smart switches that control power on/off from my phone manually or triggered by scene i.e. temp to high, or ping failure reboot rig. Energy monitor installed inside breaker box also smart home (Z-Wave). All is controlled by a Vera smart home controller. Links below.
https://www.amazon.com/gp/aw/d/B0151Z8ZQY?psc=1&ref=yo_pop_mb_pd
https://www.amazon.com/gp/aw/d/B00MBIRF5W?psc=1&ref=yo_pop_mb_pd
https://www.amazon.com/gp/aw/d/B00XD8WZX6?psc=1&ref=yo_pop_mb_pd
https://www.amazon.com/gp/aw/d/B01BX9P89Y/ref=mp_s_a_1_1?ie=UTF8&qid=1519912082&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=vera+plus+controller&dpPl=1&dpID=31jWnlwJITL&ref=plSrch
https://www.amazon.com/gp/aw/d/B007ZU69DU?psc=1&ref=yo_pop_mb_pd
Mine's usually pretty good about it. It plays a little tune when it's done that's quite loud. She will at least pull them out and stick them in the basket to fold that day.
So I'm using this guy: https://smile.amazon.com/Aeotec-Energy-Z-Wave-electricity-monitor/dp/B00XD8WZX6/
It clamps around the main wires coming into the panel. It then connects via z-wave to my Vera hub which talks to HomeAssistant. HomeAssistant also pushes to Grafana for much nicer graphs.
There are tons of options though. I picked HomeAssistant since it was open-source and not Internet dependant. Their z-wave implementation sucked though so I got the Vera hub for that. And I picked z-wave since it operates at 900mhz so doesn't step all over bluetooth or wifi.
Any other questions happy to answer them if I can. :) I'm still pretty new to the home automation stuff though. Started ~9 months ago with bits and pieces.
EDIT: Also feel free to join us over in /r/homeautomation if you want to go down the rabbit hole. :D
I have an aeotec home energy monitor attached to the phases in my panel box and reports to an app
Aeotec by Aeon Labs ZW095 ZW095-A Home Energy Meter Gen5, Small, White https://www.amazon.com/dp/B00XD8WZX6/ref=cm_sw_r_cp_api_i_2eI4CbX4944QA
You could just as easily attach it to the wires going to the circuit the washing machine is on to monitor it
Yep. Here's the Gen 2, for OP's reference. By all accounts it has more features and is easier to wire in place, but it's usually 3-5 times the price of the older one.
The Aeotec power meter is much less expensive.
Aeotec home energy meter gives you amps/voltage/khw. Pair it with home assistant, send metrics to influxdb, graph with grafana.
https://www.amazon.com/Aeotec-Electricity-Monitor-Consumption-Detects/dp/B00XD8WZX6/
Aeon Labs ZW095
It's mounted inside the breaker panel with the CTs around the wire below the main breaker. Utilizing Home Assistant, Grafana, and InfluxDB to pull everything together to collect data and make pretty graphs.
There are a bunch of power meters you could use. A hall effect sensor if you can get access to a single wire. If it's on an outlet you can get a meter for the outlet. I have no idea how compatible it is, but i assume all this stuff can be made to work.
Aeon Labs zwave energy meter and Homeseer:
https://www.amazon.com/dp/B00XD8WZX6/ref=cm_sw_r_cp_api_F3cLBbYYD4P12
$30?! I knew I shouldn’t have bought these:
Aeotec Home Energy Meter Gen5, Z-Wave Plus Smart Electricity Usage Monitor, Report Real Time Power Consumption, 2 Clamps, Each Detects up to 200 amps https://www.amazon.com/dp/B00XD8WZX6/ref=cm_sw_r_cp_api_5WvRBbZ09D7XQ
Getting a sunpower/enphase system installed in the next few months, will have the basic Envoy system installed so I can see production data. I want to also see data on my house consumption and export to grid. Installer recommended Sense.
Sense seems expensive and overkill (don't care about what appliance is drawing power, machine learning), would this device enable me to see consumption and export? Aeotec by Aeon Labs ZW095 ZW095-A Home Energy Meter Gen5, Small, White https://www.amazon.com/dp/B00XD8WZX6/ref=cm_sw_r_cp_apa_i_fUYuDbGC2Q2T5
I have a home automation hub with Zwave (hass.io) that can read and crunch the inputs from both the aeotec meter and the Enphase Envoy. My hope is that I can use the aeotec to see what power coming and going out, and combine that data with the Envoy production to see production, consumption, and export..
Maybe something like this? This one says 120v, but maybe it can handle 240v or maybe there is another one that can do the 240. You should be able to have it monitor when the device detects more than x volts passing through it and record that, though I admit I have never used one.
​
https://www.amazon.com/Aeotec-Aeon-Labs-ZW095-ZW095/dp/B00XD8WZX6/ref=sr_1_3?ie=UTF8&qid=1541093774&sr=8-3&keywords=energy+monitor+z-wave