Reddit reviews Aquatec 8800 series 8852 water pressure boost pump (+ heavy duty 3 Amp Transformer) for aeroponics 100 to 200 GPD RO system

We found 1 Reddit comments about Aquatec 8800 series 8852 water pressure boost pump (+ heavy duty 3 Amp Transformer) for aeroponics 100 to 200 GPD RO system. Here are the top ones, ranked by their Reddit score.

Aquatec pressure pump 8852, 2.6LPM for aeroponics, misting, 100 to 200 GPD RO systemsincludes heavty duty 3 amp transformer 24VAC 115VAC 60Hz better than 2 Amp or 1 Ampheavy duty steel mounting bracket much stronger and long lasting than plastic bracketincludes heavty duty 3 amp transformer, good for running the pump at high pressure 80 psi to 100 psi3 amp transformer is good for longer running time without over heating and good for adding pressure switch and solenoid valve timer switch to the pump

Check price on Amazon

1 Reddit comment about Aquatec 8800 series 8852 water pressure boost pump (+ heavy duty 3 Amp Transformer) for aeroponics 100 to 200 GPD RO system:

u/huhthatscool · 3 pointsr/aeroponics

I actually didn't tally up the cost as that wasn't really of a concern to me, but I'll try my best to provide links to the things I bought for this. Feel free to add it up for me!

Lighting
Grow medium
Nutrients
Grow tent
Air ventilation
- The only thing I ended up using from this kit was the cheapest part, the ventilation duct...
- The fan from this kit is way too powerful for my setup because my humidifier couldn't keep up
- I didn't use the carbon filter because I'm not growing weed.
Water Distiller
Humidifier
- The cheaper the humidifier, the better. I first bought (and destroyed) one that had some sort of digital switch, so it would always be in the off state when you first supply power to it, meaning you can't turn it on/off with just a relay.
Plumbing
- Aquatec 8852 booster pump
- 2 Gallon accumulator tank
- Pressure relief valve
- Tubing
- Inline Pre-filter (Sorry they must have taken the product down...)
- Misting nozzle T's
- Tube ball valves
- Analog pressure gauge
- Misting Nozzles
  - Note that these nozzles are meant for WAY higher pressure systems (~1000psi) and I actually had to take out the spring for them to operate correctly, but they never clogged up, are easy to clean, and worked perfectly for me!
Electronics
Wiring
Connectors
- Electronic Connectors
- Plumbing Connectors
  - Bulkhead connectors
  - Quick-connect kit
  - NPT to quick-connect connector
    
    I also bought various tools, like crimpers, Dremel kit, drill, etc, but I don't consider those to be project-specific as I'll have them for the foreseeable future. Let me know if there's anything you see that you think I missed!