Reddit reviews Aqueon Silicone Aquarium Sealant (10.3 oz)
We found 7 Reddit comments about Aqueon Silicone Aquarium Sealant (10.3 oz). Here are the top ones, ranked by their Reddit score.
100% silicone aquarium sealant is easy to apply and waterproof to stop leaksHigh strength silicone creates a waterproof, permanent seal that will not crack or shrinkPermanently flexible siliconeLong-lasting bond stops leaks100% Non-toxic siliconeSealant can be applied with a caulk gunOur 100-percent silicone aquarium sealant is easy to apply and waterproof to stop leaksThe high strength silicone creates a permanent seal that will not crack Or shrink and is non-toxic making it perfect for use on all aquariumsFor standard aquariums use clear and Black Seal aquariums use Black sealantOur 100-percent silicone aquarium sealant is easy to apply and waterproof to stop leaksThe high strength silicone creates a permanent seal that will not crack Or shrink and is non-toxic making it perfect for use on all aquariums
Step 1
The hardest part will probably be finding the right glass to start with. The stuff they carry at hardware stores is often thinner than you want. I usually just cannibalize another tank for these kinds of things -- cracked tanks are often free on Craigslist.
The google machine can tell you how to cut glass, it's not too hard. You can get a hand glass-cutting tool at the hardware store, which is like a tiny pizza cutter that you run along the glass where you want to make the cut (guide it with a ruler). This scores the glass so that it can be snapped along the scored line.
You'll want some clamps and thin flat boards, so that you can clamp the glass sheet between the work surface and a board (with the strip you want to cut off hanging over the edge) and clamp some boards around the strip you want to cut off so that you can apply even pressure along the length of the strip. If your score was clean and your clamps are right, you should be able to press down on the board-sandwiched strip and cleanly snap it off. Once you have your strips, stick them on with some silicone. I've used regular GE silicone (without the mold-inhibitor) but this is probably better.
The glass cutting and silicone-applying will take practice. Practice joining glass scraps with the caulk before you try it on the tank. Shit's a mess, and if gets smeared outside the seam, it's a major pain to remove, even while wet.
I wouldnt use epoxy, thats pretty volatile. You may be better of using some silicone sealant. I think that would be safer to be sitting in water for long periods. Don't want any chemicals leeching into your herbs.
edit:something like this aquarium sealant may do the trick. http://www.amazon.com/All-Glass-Aquarium-Silicone-Sealant/dp/B0002ASD34
Yeah, I'd recommend https://www.amazon.com/Aqueon-Silicone-Sealant-10-ounce-Clear/dp/B0002ASD34/ref=sr_1_4?crid=22X5GZ1M1F7PZ&keywords=fish+tank+silicone+sealant&qid=1563417265&s=gateway&sprefix=fish+tank+sili%2Caps%2C128&sr=8-4 It's a little on the pricey side but fish tanks are never cheap either way lol and I myself have used it before and it has worked. If you're looking for a cheaper alternative maybe look at the ingredients and see what other products have close-to the same stuff in it
Looks like I can get this 48x96 sheet of 1/2 inch PVC board to make an enclosure with max dimensions of 24d x 48w x 24h though 24 inches high might be a little bit excessive. I was going to seal the edges with aquarium grade [silicone sealant]
(https://www.amazon.com/gp/aw/d/B0002ASD34/ref=mp_s_a_1_1?ie=UTF8&qid=1495836754&sr=8-1&keywords=aquarium+safe+silicone) . And then cut grooves in the top and bottom for sliding door glass.
(http://www.amazon.com/All-Glass-Aquarium-AAG65010-10-3-Ounce/dp/B0002ASD34/ref=sr_1_1?ie=UTF8&qid=1414029777&sr=8-1&keywords=aquarium+sealant)
That's exactly what I got and it worked great. Just let a little bit harden on the tip and I can use it again.
I've made acrylic shelves in glass fish tanks before.
Make sure you're using the right type of silicone. Something like Aqueon. Regular silicone caulk won't cut it.
Aqueon Silicone Aquarium Sealant (10.3 oz) https://www.amazon.com/dp/B0002ASD34/ref=cm_sw_r_cp_apa_i_tWgoDbPE8BVVB
Also, be VERY careful about wedging the shelf in. Even a little outward pressure combined with some vibration and you can end up with a cracked tank.