Reddit Reddit reviews Armor All, AA255 , 2.5 Gallon 2 Peak HP Wet/Dry Utility Shop Vacuum

We found 17 Reddit comments about Armor All, AA255 , 2.5 Gallon 2 Peak HP Wet/Dry Utility Shop Vacuum. Here are the top ones, ranked by their Reddit score.

Armor All, AA255 , 2.5 Gallon 2 Peak HP Wet/Dry Utility Shop Vacuum
2.5 Gallon Polypropylene Tank2 Peak HP Motor10 Ft. Cord With Cord WrapBlower Function – Easy ConversionOn-board Accessory & Hose Storage
Check price on Amazon

17 Reddit comments about Armor All, AA255 , 2.5 Gallon 2 Peak HP Wet/Dry Utility Shop Vacuum:

u/UnalphabetizedThings · 14 pointsr/dogs

I'm kind of ashamed to admit this.....but a shop vac. I keep a little one right by the door, vacuum myself with the small brush nozzle, and then head out the door.

Edit: this one: https://www.amazon.com/Armor-Gallon-Utility-Vacuum-AA255/dp/B003M2F7NI/

u/xberry · 7 pointsr/VinylCollectors

I wrote up this big to-do about how I clean my records, and not sure many people saw it. Pasting it below because I think this hands-down, THE BEST way to clean records.



***



I've cleaned over a thousand of records with this. Highly recommend!!

http://cratedigging.co/13/9832/product_review__squeaky_clean_mark_iii_record_cleaning_machine

One pass to suck up loose dirt/dust
Second pass with distilled water + solution
Third pass distilled water only
Flip record and repeat
Solution is the same that the library of congress uses to clean their records. 20 drops per gallon. https://www.amazon.com/dp/B019YI38Z2/ref=cm_sw_r_cp_apa_7WtMAbSQYZ36W

The included brush with the Mark III wears out quickly. Buy these at Home Depot and cut them in half. I use one for the solution, another for water.
https://www.amazon.com/dp/B00004Z4H2/ref=cm_sw_r_cp_apa_MYtMAbMG8T3MW

Solution and water can be applied with these squeeze bottles. https://www.amazon.com/dp/B01E0CZPNA/ref=cm_sw_r_cp_apa_L2tMAbRS7PV87

This cleaning works fantastic for 99%of my records. I can clean a record in 3 minutes. For dirtier records I let them sit in the solution for 5-10 minutes. Stubborn dirt is spot treated with a soft toothbrush.

I put the whole shebang on a storage tub lid (upside down) so liquid that falls off collects in the plastic lid. And when it pools up from lots of cleaning, use a turkey baster to suck up the excess liquid. https://www.amazon.com/dp/B00H9M6Q46/ref=cm_sw_r_cp_apa_V.tMAbHB8KGDE




My vacuum https://www.amazon.com/dp/B003M2F7NI/ref=cm_sw_r_cp_apa_NeuMAb188RH6K

u/Shokan-Hypothermia · 5 pointsr/microgrowery

had same problem at first aswell, i bough a small shopvac that stay next to growtent all the time. Its easy to vaccum water and all leaves in no moments. Shop Vac exemple

u/ClinkyDink · 3 pointsr/guineapigs

I highly recommend this vacuum from ArmorAll:
http://www.amazon.com/gp/product/B003M2F7NI/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

It's hands down one of my favorite purchases for my piggies. It's under $40. It's not too loud (quieter than my upright) and it fits in the cubbies under my C&C cage.

I leave it plugged into that bay and use it twice a day to clean all the poop and any stray hay or Carefresh type shavings that end up on the fleece. The filter is washable (I wash it and clean out the whole thing about once a week) and it is contained enough that it doesn't smell when not in use. The air exhaust will smell a little bad when you're using it (if there is poop in the canister) but I fixed that by throwing a couple of dryer sheets into it.

After I use it on the fleece I go over the area around my cage and pick up anything there too. The brush attachment is great for stubborn shavings that are such a pain to get out of the fleece with a regular dustpan setup.

I use one of the long rigid hose attachments from my upright in order to reach the back of the cage, I have a two level cage and it's impossible to reach back there without some kind of assistance.

Go get one! Go! Seriously, it cut down what took me like 10-15 minutes to do (and not terribly successfully) into a quick 3 minute task that cleans up absolutely everything.

EDIT: I know it's marketed for cars, but they really should start marketing it toward small pet owners too!

u/Chro-matic-Death · 3 pointsr/microgrowery

Pots are sitting on one of these, set in side this. Suck the water out with this.

u/zhiryst · 3 pointsr/AutoDetailing

have you thought of using a wet/dry shop vac to suck out the hot water once you sprayed it on?

edit: I have this http://www.amazon.com/ArmorAll-AA255-Utility-Vacuum-gallon/dp/B003M2F7NI/ref=sr_1_6?ie=UTF8&qid=1405434721&sr=8-6&keywords=car+vac which I got for $38 last year with Prime, it's been a great workhorse so far.

u/One_Can_of_Fresca · 2 pointsr/teslamotors

I got this one. Seems to be fine! I like it because I can carry it around easily without bumping into the car

Armor All 2.5 Gallon, 2 Peak HP,... https://www.amazon.com/dp/B003M2F7NI?ref=yo_pop_ma_swf

u/Playstatiaholic · 2 pointsr/AutoDetailing

I have a 2hp armor all vacuum that can blow out and suck, I use it to dry my car and it works just right with vacuuming!
Here it is! http://www.amazon.com/ArmorAll-AA255-Utility-Vacuum-gallon/dp/B003M2F7NI/ref=sr_1_1?ie=UTF8&qid=1459296211&sr=8-1&keywords=armorall+vacuum It's really cheap! and gets the job done very well!

u/A_lizard10 · 2 pointsr/Rabbits

A shop vaccum might be the best bang for your buck. WabbitWiki recommended this $35 one:
https://www.amazon.com/ArmorAll-AA255-Utility-Wet-Vacuum/dp/B003M2F7NI/

I have the dyson v6 animal. It's pricey, but I got it as a Christmas present.

Pros: it picks up hair better than anything else I've ever used! It comes with tons of attachments. Super light weight and it's cordless! I don't have to worry about the buns eating it.

Cons: it's expensive. The canister fills up quickly and you have to empty it a lot. The brush head clogs easily if you're cleaning up messes with big pieces, or if your bun has larger poops, like bigger than coco puffs poops.

Over all, it's super convenient and that's what I needed. I use it every day and I love it, dispite having to clean out the canister and brush head a lot. For me and my 3 rabbits, who have free range of a 20ft x 20ft carpeted room, it is worth the investment.

u/DDotJ · 2 pointsr/teslamotors

A good car vacuum and Tesla All Weather Floor Mats would be good. You can use kick mats to help protect the back of your seats from being kicked. Microfiber towels and window cleaner would be good to have to wipe all the tiny fingerprints off the window too. Good luck!

u/doc_samson · 1 pointr/DIY

You could try a mini-shop vac. I have one by Armor All that is about $35, is 2HP, has wet/dry filters, can vacuum and blow air out, and has detail attachments that can funnel the airflow to increase pressure. I haven't used it as a replacement for compressed air but it might work, and has the bonus that it's also a shop vac.

https://www.amazon.com/Armor-All-Gallon-Utility-AA255/dp/B003M2F7NI/

u/lol_admins_are_dumb · 1 pointr/woodworking

http://www.amazon.com/Oneida-Molded-Dust-Deputy-Cyclone/dp/B002JP315K/ref=sr_1_1?ie=UTF8&qid=1450308208&sr=8-1&keywords=dust+deputy

On top of a bucket with a tight sealed lid, and hooked up to:

http://www.amazon.com/ArmorAll-AA255-Utility-Vacuum-gallon/dp/B003M2F7NI/ref=sr_1_2?ie=UTF8&qid=1450308251&sr=8-2&keywords=shop+vac

The cyclone separates the bulk of the dust/debris and drops it into the bucket below so it doesn't wind up in your shop vac, which extends longevity of the vac as well as makes the time between emptying much longer since it's now the size of hte bucket not the tiny little vacuum.

Of course you could always make the blower yourself too but it'll be hard to beat a shop vac in price efficiency.

u/Whysguys · 1 pointr/brewing

something like This

u/santiagoelcampeon · 1 pointr/microgrowery

the buckethead is a great contraption, but it doesn't come with any sort of attachment...just a hose.

i think this Armor All vacuum is what i'll get. it's about $15 more but i get bunch of attachments and won't have to switch out my 5gal bucket.

thanks for your advice!

u/Paco_Smithereens · 1 pointr/computers

Cheap Shop Vac on reverse is what I've always used (as I don't have an air compressor).

As someone else mentioned, hold the fans with your finger so you don't spin them up with the air.

u/pbass1738 · 1 pointr/AutoDetailing

Armor All ShopVac I use this professionally. Works great. $40.

u/[deleted] · 1 pointr/vinyl

You don't need the extra brush or wand and they don't break. I like it because I have one for cleaning cycles and one for rinse cycles. I use a strong enzyme + surfactant cleaner and I like to keep things separate to avoid cross contamination because I'm picky. Not necessary, but worth getting IMHO. He can make them in different colors so you don't get them mixed up, that's what I did.

Try this shop vac, it's what I use:

https://www.amazon.com/Armor-Gallon-Utility-Vacuum-AA255/dp/B003M2F7NI

You could also get something else, search around maybe. The 2HP is more than enough suction. You will have to open the air release on the wand a little to get it where you want without the wand sticking to the record. Pretty easy to dial in. Vac is also a hell of a lot easier to empty out and make sure mold isn't' growing than most self-contained RCMs.