Reddit reviews AZERONE Led matrix pixel 4MM Pitch led panels digital led module indoor led display screen rgb led board 2121SMD 64x32 Dots (P4 256x128mm)
We found 2 Reddit comments about AZERONE Led matrix pixel 4MM Pitch led panels digital led module indoor led display screen rgb led board 2121SMD 64x32 Dots (P4 256x128mm). Here are the top ones, ranked by their Reddit score.
1. Excellent visual effect, better viewing effect for text and graphic or video2. Large viewing angle,both H/V can reach 110 degree;getting vivid effect within any position of the viewing range;3. High contrast ratio and good evenness, high uniformity,without mosaic4. Resist of the high temperature and antioxidation and anti-statiic5. Any led in each pixel can be respectively replaced, which reduce the cost of the display maintenance.
yeah i'll make the list!
https://www.adafruit.com/product/3211
https://www.adafruit.com/product/592
https://www.adafruit.com/product/3708
https://www.amazon.com/gp/product/B003V01ALO/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B019BUA81U/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07RJPV36C/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07F2JW8D3/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/Kingston-64GB-microSDHC-microSD-SDCS/dp/B079GVC5B8/ref=sr_1_6?keywords=micro+sd+card+and+adapter&qid=1563237791&s=gateway&sr=8-6
Shadow box from hobby lobby, 11x14 for 50% off being 12.5 dollars
https://www.amazon.com/ANVISION-4-pack-Connector-5-5x2-1mm-Soldering/dp/B06XX4LXWJ/ref=sr_1_2?keywords=5v+male+to+female+switch&qid=1563237867&s=gateway&sr=8-2
one of these- i had one on hand from a different purchase.
i also had a usb keyboard/mouse on hand so didn't need those either
need a small Philips head for pi.
command hook strips from Walmart, that can hold up to 5lb.
lastly you just need to put it all together on the pi and all
I've done some cli stuff in the past, but I'm pretty rusty on it.
The display is this one the same store sells a P4 one that has reviews of people getting it to work with the adafruit hat. The rest of my setup is a pi zero w 1.1 with a soldered header (possible failure here, although I'm pretty confident in my soldering), adafruit rgb matrix bonnet, and usb hub
I'll probably start from scratch with an adafruit tutorial to at least get the display working. Some of my problems could be from my raspbian installation. The first issue I ran into was with the micro sd card I was using, so I initially installed raspbian full from NOOBS.
I'll feel better once I get the panel to display anything at all.