Reddit reviews BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W
We found 7 Reddit comments about BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W. Here are the top ones, ranked by their Reddit score.
✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Very cool man!
I made one of these years ago; a couple suggestions:
I use this small dehumidifier because it works in low temps.
https://www.amazon.com/Eva-dry-Edv-1100-Electric-Petite-Dehumidifier/dp/B000H0ZDD2/ref=mp_s_a_1_4?crid=1WGBGEK5JUV0P&keywords=eva+dry+dehumidifier&qid=1551123603&s=gateway&sprefix=eva+dr&sr=8-4
And I have that on a humidity controller set to turn it on above 75 Rh.
https://www.amazon.com/Humidity-Controller-Inkbird-Humidistat-Pre-wired/dp/B01J1E5LWM/ref=mp_s_a_1_5?crid=2RVTXNZLC15DS&keywords=humidity+controller&qid=1551123716&s=gateway&sprefix=humidty+&sr=8-5
The fridge is on a temp controller that turns it on above 57 and shuts it off at 55degrees
https://www.amazon.com/Century-BNQ-T7B-Digital-Cooling-Controller/dp/B01LZV591B/ref=mp_s_a_1_13?crid=1NXIEB0MA228Z&keywords=temperature+controller&qid=1551123886&s=gateway&sprefix=temperature+&sr=8-13
For temps look at something with a temp sensor and pair that with a cheap booster fan and it will pull the air out when the light is on and regulate the temps for you. https://www.amazon.com/Century-BNQ-T7B-Digital-Cooling-Controller/dp/B01LZV591B/ref=mp_s_a_1_2?ie=UTF8&qid=1550002156&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=century+temp+controller
I looked at a comparable led light and it looks like it would have appropriate PAR levels of light at about 24-30 inches above your plant. 12 inches is really close. Plants at that stage need very little light intensity. The consensus is about 250 par for seedlings. Here is a link to something with pretty similar wattage draw to give you an idea of intensity at different heights. https://www.amazon.com/VIPARSPECTRA-Reflector-Spectrum-Indoor-Function/dp/B015FLSOCE/ref=mp_s_a_1_3?ie=UTF8&qid=1550002428&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=viparspectra
Just get a basic thermostat that turns the fan on at whatever temperature you want.
I did some pretty serious research on this a few weeks ago and ended up going with this set and adding on 2 kegs and the 5 lbs CO2. I didn’t want to go with something off Craigslist for sanitary and safety reason and this seemed to be the best deal and reliable. I then found a 7cft chest freezer off Craigslist for $40 after weeks of watching it like a hawk. They go fast! Also check Let Go, OfferUp, and Facebook marketplace. Then I bought this temperature regulator. All in all it was about $300 that I rationalized to my wife by using my hard earned discover cash back on and promising it would help us better host our friends :) worth it!
Edit: I went with the pin lock kegs because they were about $20 cheaper but it look like there out of stock. Although people seems to prefer ball lock anyways.
I would put a fan next to it and use something like this, Century BNQ-T7B(C) Digital Cooling Temp Controller for Cooling Device 40-10, 3.15 x 1.69 x 4.70, Black https://www.amazon.com/dp/B01LZV591B/ref=cm_sw_r_cp_apa_i_d57jDb73CJY6P to turn it on at a certain temperature.. it's what I use and also a z wave temperature sensor to keep and eye on it remotely..
Or better yet, use something like this NavePoint 4U 19 Inch Vertical Wall Mount Rack Wall Mountable Server Rack w/Hardware Black https://www.amazon.com/dp/B01M1GFVKD/ref=cm_sw_r_cp_apa_i_F87jDbSJAM9KB and mount it in your office or guest room if it's not too loud.. it takes barely any space.
If the thermostat is messed up does it still cool? If so you could get an independent temperature controller like this - https://www.amazon.com/Century-BNQ-T7B-Digital-Cooling-Controller/dp/B01LZV591B