Reddit reviews CableCreation Internal Mini SAS to Mini SAS Cord, SFF-8087 to Left Angle SFF-8087 Cord, Compatible with RAID or PCI Express Controller, 2.5FT /0.75M

We found 3 Reddit comments about CableCreation Internal Mini SAS to Mini SAS Cord, SFF-8087 to Left Angle SFF-8087 Cord, Compatible with RAID or PCI Express Controller, 2.5FT /0.75M. Here are the top ones, ranked by their Reddit score.

CableCreation Internal Mini SAS to Mini SAS Cord, SFF-8087 to Left Angle SFF-8087 Cord, Compatible with RAID or PCI Express Controller, 2.5FT /0.75M

[ High Speed Data Transfer] CableCreation Mini SAS 36 Pin cable is a high-speed data storage interface designed for high-throughput and fast data access. This patch cord supports data transmission of 4 channels of 12 Gbps[ SFF-8087 Port ]This SFF-8087 interface is mainly used on the mini SAS 4i array card as an internal SAS cable. mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a server or workstation.[ Wide Compatibility ] Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224[ 90 Degree Design] Left Angle design can make for better cable management in some situations, especially in tight spaces.[ What You Get] You will get 1 x Mini SAS to Mini SAS cable, backed with 24 Months Warranty and lifetime technical service.

Check price on Amazon

3 Reddit comments about CableCreation Internal Mini SAS to Mini SAS Cord, SFF-8087 to Left Angle SFF-8087 Cord, Compatible with RAID or PCI Express Controller, 2.5FT /0.75M:

u/Andrew_86 · 2 pointsr/homelab

https://www.amazon.com/dp/B01KFEVOPA

u/itsthedude1234 · 2 pointsr/homelab

You could do what I did. Buy an lsi 9201-8i card and this from Amazon

CableCreation Internal Mini SAS(SFF-8087) 36Pin Left Angle Male to Internal Mini SAS (SFF-8087) 36Pin Male Cable, 0.75 Meter https://www.amazon.com/dp/B01KFEVOPA/ref=cm_sw_r_cp_apa_i_DXrBCbKF36D3S

Did this so I could move a drive already set up with Windows and use it in the Dell.

u/diabloman8890 · 1 pointr/homelab

Buy an H200 on eBay, or a generic LSI version of the same card.
Flash it to IT mode using one of the many, many guides or discussion threads on this topic. Make sure you include a boot ROM or you'll be scratching your head later as to why you were able to install an OS on the server but not boot from it
Stick it in a PCIe slot where it's not blocking anything important, and your cables can reach.
Find out which internal SAS cables are compatible with your card, you need a pair, get two of them. These come in either straight, right, or left angle versions; these all work the same and it's entirely your preference so long as you can cable manage appropriately and close the case. You're most likely going to need one or the other direction of these: https://www.amazon.com/CableCreation-Internal-SFF-8087-36Pin-Angle/dp/B01KFEVOPA/ref=sr_1_1_sspa?keywords=sas+left+angle&amp;qid=1556060082&amp;s=gateway&amp;sr=8-1-spons&amp;psc=1
Plug both cables into your card ("A" and "B"), and plug the other ends into the corresponding sockets on your backplane (eg, "A" goes into "A")

Glad to help out if you have questions, but the above workflow gets talked about pretty frequently around here, so you'll probably want to do a search. Tons of info about this around this sub.

edit: I don't know if you'll want left- or right-angle SAS cables for an R720. Pretty sure I used right-angle ones in my R720xd. It's confusing as hell which kind you need, but the "right" or "left" angle is from the cord to the connector, not from the end of the connector to the cable. In other words, look at the pictures on Amazon very closely to figure out which you need.