Reddit reviews Coaxial Cable Feed Thru Wall Bushing RG6 RG59 White 100 Pack 7/16" Single Plug Coax Cable Feed Thru Wall Bushing RG6 RG59 White 100 Pack Single, Audio Video Speaker Data

I've done this many times. Here's how I do it.

​

- Masonry bit is best but, as others have said, any bit will work with stucco.

- DO NOT drill the stucco from the inside, out. You will blow out the stucco on the other side.

Instead, put a low voltage box where you want your cable to be on the inside of the house.

here is what they look like.

https://www.google.com/search?rlz=1C5CHFA_enUS768US768&q=low+voltage+box&tbm=isch&source=univ&sa=X&ved=2ahUKEwisgbGXjdjgAhUmZN8KHdALDS4QsAR6BAgDEAE&biw=1440&bih=766&dpr=2

​

The square hole you cut for the box will be big enough for you to see through. drill a small pilot hole to the outside. When you just barely break through, stop, go outside and drill the rest from the outside.

​

You can then attach the cable and finish the low voltage box with one of these:

https://www.amazon.com/Legrand-Q-WP2009LAV1-Wallplate-Almond/dp/B00E1ZPEDS/ref=sr_1_8?qid=1551139633&refinements=p_n_feature_two_browse-bin%3A6426192011&s=lamps-light&sr=1-8

​

​

- Use one of these on the outside hole and fill the rim with silicone caulk to waterproof it.

https://www.amazon.com/Coaxial-Cable-Bushing-Single-Speaker/dp/B00UD6AM7W

​

- Make sure top put a drip loop on the outside. It will prevent water from following the coax into your wall.

here is what a drip loop looks like

https://www.google.com/search?q=coax+drip+loop&rlz=1C5CHFA_enUS768US768&source=lnms&tbm=isch&sa=X&ved=0ahUKEwj7p4unjNjgAhUnhOAKHRVjB1QQ_AUIDygC&biw=1440&bih=766&dpr=2

​

​