Reddit reviews Crazepony 1S LiPo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
We found 7 Reddit comments about Crazepony 1S LiPo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX. Here are the top ones, ranked by their Reddit score.
Output Connector: 6x Micro JST 1.25; 6x JST-PH 2.0Board size: 62.5x32x5mm, Weight: 17g (0.6ounces)Charge 6 batteries at the same time, keep your tiny whoop staying in the airInput Charge Connector: Male 4mm Banana Plug, it needs to connect to LiPo charger for charging batterySuitable for battery of Blade Inductrix, Glimpse, mCP X, Nano QX 3D, Nano CP X, Nano QX etc
That may be the case, which would suck. Look into one of these. You can charge 1-6 batteries and it treats them as a single one cell battery. More convenient and less convoluted if you ask me.
I just bought a Makerfire RTF FPV, yay!
I saw the Makerfire team recommended these batteries in their Q/A on Amazon:
Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery with 4pcs Plastic Tubes
https://www.amazon.com/dp/B01MSLAA9W
***note: They actually said 220mah when they posted the link to 250mAh, so I don't know which is wrong -- the link, or 220mah recommendation? What battery should I go with?
And this, to charge it:
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
https://www.amazon.com/dp/B01ID6U4LC
Now for my question:
Don't I need some kind of special apparatus to plug this into my wall?
Is that what this is thing is?:
Crazepony SkyRC Quattro 1-Cell 1S Lipo Battery Charger Blade Inductrix Discharger MX mCPX E-flite Connector
https://www.amazon.com/dp/B01IGK5RSA/ref=psdc_2234135011_t1_B01ID6U4LC
Is that $49 thing good enough? Overkill? Just right?
Thanks!
If you fly with 1s batteries a balance charger might not ever be worth it. (You can't balance a 1s battery) I use the IMAX b6ac but I have 2 other quadcopters that run 4s.
It's nice being able to parallel charge 6 batteries at a time, and makes batteries last longer being able to storage charge. Which both likely do. You'd need a paraboard to do more than one Inductrix battery
https://www.amazon.com/dp/B01ID6U4LC/ref=cm_sw_r_cp_apa_vpKEybSJESZA6
Just get a 1s
balanceparallel board, make sure the plugs match the batteries you have and follow the normal rules of all batteries at very close to the same voltage and such when using it.Here is the link to the parallel charger:https://www.amazon.com/Crazepony-Battery-Charging-Inductrix-Parallel/dp/B01ID6U4LC
And here is my lipo charger(works fine with all other lipos):
https://hobbyking.com/en_us/imax-b6ac-v2-professional-balance-charger-discharger.html
https://www.getfpv.com/dtn-pico-ph2-micro-paraboard.html (more on the way)
https://www.amazon.com/Crazepony-Battery-Charging-Inductrix-Parallel/dp/B01ID6U4LC/ref=sr_1_3?ie=UTF8&qid=1510939122&sr=8-3&keywords=crazepony+parallel+board&dpID=41fwQN1hWpL&preST=_SY300_QL70_&dpSrc=srch (cause this is an unofficial account and I'm not here to just promote this company)
The charger claims to work with
>Any other RC 3.7V 1S LiPo battery with JST
The batteries are Micro JST 1.25, so not sure if the charger will work. I use this one to charge mine
The batteries you linked are the correct ones, yes.
Do you not want to solder or you dont know how? you can build one with an F3 board so you can add beta flight for a little more (if you have a transmitter already that is)