Reddit reviews GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch
We found 7 Reddit comments about GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch. Here are the top ones, ranked by their Reddit score.
MAKING TUBE CUTTING EASY: Quick and easy way to get clean rounded cuts on tubing from 0.12" - 0.87" outer diameter in tight areas and close quarters with GOCHANGE Tube CutterESSENTIAL TUBE CUTTER: This is a must have tool for all handy men, especially plumbers, electricians, mechanics, HVAC service men and for DIY enthusiasts who need to cut pipes and tubing for their projects. Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubingSTRONG AND LIGHTWEIGHT: GOCHANGE Mini Tube Cutter is small but strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cutsCLEAN CUTS: Solid ergonomic feel and consistent tracking make cutting tubes a very comfortable and quick task. Bottom rotating wheel adjusts the cutter to the proper fit in a seamless smooth movementONE YEAR WARRANTY & 24 HOURS OF CUSTOMERS SERVICE: Safe and Durable with strict quality testing. We offer 100% risk-free satisfaction guarantee and 1 year warranty. If you still have questions after your purchase, Please contact us by e-mail. we will help you to solve problems within 24 hours.
Oh nice, I didn't realize he offered black aluminum!
For what it's worth, in the future, get one of these puppies for cutting aluminum and copper tube: https://www.amazon.com/GOCHANGE-Cutter-Aluminum-Cutting-8inch-7/dp/B01AYUVCX4
The only thing better would be a chop saw with a fine tooth blade for cutting metal, but one of those tube cutters will give you a nice clean, square edge.
You know those cutters plumbers use to cut copper pipe, and they revolve around the outside of the pipe? The tools I've seen are similar in concept.
This is the pipe cutter i used.
https://www.amazon.com/gp/product/B01AYUVCX4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
I think your parts list looks good. I Haven't use the EK radiators before but i use their cpu block, gpu block, gpu backplate, and fittings in my current build and like them.
I prefer the drain port down low. It can be anywhere, you will just have to move the case around to get all the water to drain. Ideally its at the lowest point, but depending on how the loop is laid out that might not be possible. I've done a T off the output of the pump to make a drain port before. Right now i have it off the bottom port of my radiator.
This is my current drain port
https://imgur.com/Z7JWg4w
This is a previous version
https://imgur.com/Y21tkIa
The following are the parts I'll be purchasing for this build. I think I've covered everything, but as this will be my first custom loop if someone could give it the once over and make sure I'm not forgetting something it would be GREATLY appreciated!
Link to current build
Item | Vendor | Price | Quantity |
---|---|----|----|----
[CE 280](https://www.ekwb.com/shop/ek-coolstream-ce-280-dual","EK-CoolStream CE 280) | EK | 75.99 | 1 |
[PE 360](https://www.ekwb.com/shop/ek-coolstream-pe-360-triple#ow_alert_box","EK-CoolStream PE 360) | EK | 79.99 | 1 | 1
Corsair SP 120 2-pack | Amazon | 27.99 | x2 |
EK 140 Revo D5 | EK | 163.99 | 1 | text
EK Supremacy EVO | EX | 78 | 1 | text
EK Pump Bracket | EX | 13.49 | 1 | text
MSI GTX 1080 Sea Hawk EK| Newegg | 569.99 | 1 | text
ATX Bridging Plug | EX | 2.49 | 1 | text
Alphacool Silicon Bending Cord | Amazon | 8.49 | 1 | text
EK-CSQ Plug | EK | 3.49 | x2 | text
EK-AF 6mm M-M Extender | EK | 2.99 | x2 |
EK Ball Valve | EK | 19.99 | 1 | text
EK X Splitter | EK | 8.99 | 1 | text
Heat Gun | Amazon | 17.71 | 1 |
Step Bit | Amazon | 10.85 |1| text
Pipe Cutter | Amazon | 7.99 | 1 | text
EK-HDC 16mm Gold Fitting | EK | 8.99 | x10 |
EK PETG 12/16 Tube | EK | 8.49 | x4 |
I made my stands for my Rift using cheap-assed Ikea floor lamps and a camera mount epoxied on top. 2 lamps make 1 89" stand (cut to length using a cheap pipe cutter), with the 2" camera mount, and 2.5" for the sensors, all coming to 93.5" in total...2.5" from my 8' tall ceiling. The lamps were originally $10 each, but they seem to have gone up. The best part of the stands is that the base is only 10", instead of 2-3 feet square that a tripod takes up. Fits nicely in corners, and also looks nicer than the legs of tripods. They're actually quite fashionable. :P
Yeah this happened to me when I first received the die. I didnt ensure it was tight like the instructions said. Double check and make sure the tip of the pin isnt bent. I also recommend using a small pipe cutter to remove the casing. GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch https://www.amazon.com/dp/B01AYUVCX4/ref=cm_sw_r_cp_apa_aFU.BbB3HX2JF. You can use a grinder or saw to remove the case but I'm a bit heavy handed and usually hit the pin. Pulling it off usually involves a lot of grunting and cursing on my end.
Tube cutter, the bigger ones are easier to cut with, but it doesn't look like you have much space to work with.
Do you have a breaker bar to put on your wrench?