Reddit reviews INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White
We found 1 Reddit comments about INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White. Here are the top ones, ranked by their Reddit score.
Premium-quality, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.Use on Drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces.Bonds to "hard-to-coat" surfaces and can be top coated with almost any productCures in temperatures as low as 40 °F300 - 400 square feet per gallonLow VOC and easy soap and water cleanupApply when air and surface temperatures are above 35 °F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contactNot for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer
We had old brown cabinets and no time to do a renovation. So we took the doors and hardware off, cleaned the hardware and scrubbed the doors. So, much, grease. After that we used “Stix primer”
INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White https://www.amazon.com/dp/B07KX8NV7Y/ref=cm_sw_r_cp_api_i_1xdvDb5YCCY1H
It really made it easy to go right over the cabinets without having to sand everything. We then replaced the handles and it brought complete new life to a very dated kitchen. Paint does amazing things.