Reddit reviews Insten Crystal Case Compatible With Nintendo 3DS XL (Not compatible with the New version)

It is actually a headphone case. I like it better because of the pocket so things don't move around as much. Also it is padded, less noisy, won't scratch, has a zipper, and in my opinion, feels better. Here is the exact one I got, but there are millions of other ones that are different shapes and colors.
Some other things that are notable:

• Victorinox Signature Lite Pocket Knife (Light/Pen instead of Tweezers/Toothpick (Silver Tech)
  
  
• 3DS XL Case
  
  
• The Gum (I cut into a square)
  
  
• Gear Tie - The Black Thing (reusable rubber twist tie)
  
  
• HP Flash Drive (8 GB - 64 GB)
  
  And sorry if you're wondering, but I don't know what kind of knife that is.

DO NOT use clear nail polish, it will just ruin the surface of the DS. Rather than that, just get a crystel DS case where your DS stays protected, and looks good and clean! ;)

Here is a link!

EDIT: And yes, I do own this case and it has kept my 3DS in perfect condition for about a year now!

Why not get a case like this?. Won't be so permanent.

If you want maximum protection for your 3DS, the PDP NERF Armor is hands down your best bet. Keep in mind that it does make the 3DS a bit bulkier, but it essentially doubles as a carrying case.

3DS: http://www.amazon.com/PDP-3DS-NERF-Armor-Blue-Nintendo/dp/B005VO5ZU0/ref=sr_1_2?ie=UTF8&qid=1372122295&sr=8-2

XL: http://www.amazon.com/Nerf-3DS-XL-Armor-Blue-nintendo/dp/B00BRA9R7E/ref=sr_1_1?s=videogames&ie=UTF8&qid=1372122429&sr=1-1

If you are generally very good about not damaging your system, and just want to minimize things like scratches and whatnot, I like the eForCity crystal case. It does the job without adding any extra bulk to your 3DS.

3DS: http://www.amazon.com/eForCity-Snap--Crystal-Compatible-Nintendo-3DS/dp/B004T0G8O4/ref=sr_1_1?s=videogames&ie=UTF8&qid=1372122648&sr=1-1

XL: http://www.amazon.com/eForCity-Crystal-Compatible-Nintendo-3DS-X/dp/B0093W7KG8/ref=sr_1_1?s=videogames&ie=UTF8&qid=1372122603&sr=1-1

I also have screen protectors I got from Amazon and it doesn't mess up my 3D at all and I don't even notice them. I also ordered one of those hard plastic protective shells for the outside of my XL, which helps with scratching bit time.

EDIT:Here is a link to what I bought, the little packing on the bottom with the screen protectors and the zipper case and the shell for less than 6 bucks.

Here you go

https://www.amazon.com/Crystal-Compatible-Nintendo-3DS-version-X/dp/B0093W7KG8

https://www.amazon.com/gp/aw/d/B0093W7KG8/ref=mp_s_a_1_1?ie=UTF8&qid=1495225213&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=3ds+xl+crystal+case&dpPl=1&dpID=418vLoCFD%2BL&ref=plSrch

This one has a hinge that might help you keep it from falling further apart.

Enjoy and show that Pikachu off

http://www.amazon.com/eForCity-Crystal-Compatible-Nintendo-3DS-X/dp/B0093W7KG8

Love my Gelaskins; I have one on every system, plus all my controllers. If I could Gelaskin my TV, I would.

If you decide to do a gelaskin, I also recommend this case to go with it.

I would love this because I don't like scratches. :P

I bought these 2 items a long time ago and they've been awesome, very worthwhile purchases.

3DS XL Case (This looks awesome on my Red Pokemon Y 3DS): http://www.amazon.com/gp/product/B0093W7KG8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Carrying Case (Fits 3DS XL with crystal case):
http://www.bestbuy.com/site/insignia-universal-portfolio-case-for-nintendo-2ds-3ds-and-3dsxl/5275156.p?id=1219117625140&skuId=5275156

I recommend these to anyone looking for some good products at an affordable price.

Edit: Also, my crystal case hasn't turned yellow and I've had it for a year, so I recommend this over the Hori case + it's way cheaper.

Your best bet is a clear plastic case that has an external hinge on it. You can also get a nerf one for a little bit more.

My wife's old DS did this, and that was our solution. Then mine broke too. That hinge is the weakest part of the design, and it breaks often. I think the lights being 'inside' it make it structurally thinner/weaker.

I also have a Pikachu 3DS XL, and I was wondering if you have any worries about rubbing or scratching with this type of case? I have a clear plastic case for my DSLite, and I really wanted to get one to protect my PikaXL, but one of the reviews on Amazon for a similar case mentioned that some of the paint had been rubbed off their 3DS along one of the sides, where the plastic case was rubbing against the console.

I'm probably just worrying too much about it, but I thought I'd ask if you noticed anything similar that could scratch up the cool paintjob.

Do you need it for the original 3ds xl, or the "new" 3ds xl?

Edit: either way, here is the original on amazon

And the "new," also on amazon

Edit #2: you don't mean the housing shell, do you?

grab a skin, this site is great, It'll cover the hole, and the skin is pretty sturdy
http://www.gelaskins.com/store/gaming/Nintendo_3DS_XL/collection/Most_Popular

then I'd toss one of these for extra protection
http://www.amazon.ca/eForCity-Crystal-Compatible-Nintendo-Clear/dp/B0093W7KG8/ref=sr_1_1?ie=UTF8&qid=1376763958&sr=8-1&keywords=3ds+xl+clear+case

articfawx mentioned that you should pick up a screen protector and I agree. Best Buy should have them for less than 20 bucks and they cover the top and bottom screens, so you'll almost never have to worry about having your system damaged.

Another really necessary thing I would recomend is buying one of these as they're going to keep the paint and everything from getting scratched without putting a big stupid NERF case on it.

So yeah, Screen cases and a Crystal Case will greatly reduce the ammount of damage you'r 3DS will take. And believe me, it will take some damage. It just happens.

http://www.amazon.com/eForCity-Crystal-Compatible-Nintendo-3DS-X/dp/B0093W7KG8/ref=pd_sim_vg_8

Ci-Yu-Online Retro NES Limited Edition VINYL SKIN STICKER DECAL COVER for Nintendo 3DS XL / LL Console System https://www.amazon.com/dp/B00P6S0X1M/ref=cm_sw_r_cp_apa_i_ABHVCbY292AJA

Insten Crystal Case Compatible With Nintendo 3DS XL (Not compatible with the New version) https://www.amazon.com/dp/B0093W7KG8/ref=cm_sw_r_cp_apa_i_.3HVCb4Y7FGQR

There's this: http://www.amazon.com/eForCity%C2%AE-Crystal-Compatible-Nintendo-3DS-X/dp/B0093W7KG8/ref=sr_1_3?ie=UTF8&qid=1417528756&sr=8-3&keywords=3ds+xl+transparent

And I recall seeing a clear decal on Etsy to put over your decal in order to protect it (I'll try finding that, but I guess once you put that on it can't be signed anymore)

try this maybe?
http://www.amazon.com/eForCity-Crystal-Compatible-Nintendo-3DS-X/dp/B0093W7KG8/ref=sr_1_1?ie=UTF8&qid=1370838169&sr=8-1&keywords=3ds+xl+clear+case

https://www.amazon.com/dp/B0093W7KG8/ref=cm_sw_r_cp_api_3M2HybKFHP2Q4


I have a similar case on my New 3DS. It seems like it holds the hinges tightly. It's one of those cases that has its own hinges, like the Nerf ones.

For my "XL", I purchased this Crystal Case, http://www.amazon.com/gp/product/B0093W7KG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 , I was only interested in the casing feature, but the fact that it felt comfortable and "stiffened" (not sure if that's a good word to use" the screen hinges made this purchase non-regrettable.

I'm not sure if this company has the exact casing for the 3DS, but I recommend looking at some YouTube videos of Crystal Casing, and hope for a video that helps you.